Gbrs Group167514310
Gbrs Group Lerna Mount Kit Ampnt Fde$184.00
Loading...
Loading...
Loading...
Availability: In Stock
The Gbrs Group Lerna Mount Kit for Aimpoint Micro T-2 is a raised optic mount purpose-built for shooters who need a higher sight line without compromising shooting position or situational awareness. Unlike traditional low-mounted systems, the Lerna positions your optic at 2.91 inches above the rail, letting you keep your head upright and your spine vertical—the stance that matters when you're wearing body armor, communications headsets, night vision, or a gas mask. That higher line of sight means faster target identification, better situational awareness, and the athletic posture that translates to faster decision-making under pressure. Whether you're running a duty rifle, a training gun, or a defensive build, the Lerna eliminates the compromise between gear and gun handling.
Built for durability in demanding environments, the mount body is machined from 6061-T6 aluminum and finished with Type 3 Class 2 hard coat anodize. The clamp bar and screws are 17-4 stainless steel in H900 condition with Melonite QPQ finish—corrosion-resistant and tough enough for professional use. Washers are 18-8 stainless steel, passivated and black oxide finished. Everything is designed to stay tight and reliable through thousands of rounds.
Installation is straightforward with the included long-reach T10 key, 3/32-inch hex key, and quarter-inch drive T25 bit—all the tools you need to mount and zero your Aimpoint Micro T-2. The complete kit weighs just 4.8 ounces, so it won't burden your rifle's ergonomics or balance. If you're building a rifle around better ergonomics and faster target acquisition, the Lerna is a serious choice.
| Optic Centerline Height | 2.91 inches |
| Compatibility | Aimpoint Micro T-2 |
| Mount Body Material | 6061-T6 Aluminum |
| Mount Body Finish | Type 3 Class 2 Hard Coat Anodize (Black) |
| Clamp Bar Material | 17-4 PH Stainless Steel, H900 Condition |
| Clamp Bar Finish | Melonite QPQ |
| Screw Material | 17-4 PH Stainless Steel, H900 Condition |
| Screw Finish | Melonite QPQ |
| Washer Material | 18-8 Stainless Steel |
| Washer Finish | Passivated Black Oxide |
| Weight (with Aimpoint Micro T-2) | 4.8 ounces |
The kit includes the Lerna mount itself, a long-reach T10 key, a long-reach 3/32-inch hex key, and a quarter-inch drive T25 bit—everything you need to install and zero your Aimpoint Micro T-2.
Yes, the Gbrs Group Lerna Mount Kit is specifically designed for the Aimpoint Micro T-2.
The Lerna positions your optic at 2.91 inches above the rail. This raised sight line clears most communications headsets, night vision mounts, and gas masks, allowing you to maintain an upright, athletic shooting posture with your spine vertical. That posture improves situational awareness, target acquisition speed, and the ability to present body armor to threats.
The mount body is 6061-T6 aluminum with Type 3 Class 2 hard coat anodize. The clamp bar and screws are 17-4 stainless steel in H900 condition with Melonite QPQ finish, and washers are 18-8 stainless steel passivated and black oxide finished. These materials and finishes are military-grade and designed for professional and demanding field use.
SKU: 144598315 • Width: 5in • Height: 3.5in • Depth: 6.5in • Weight: 0.81oz
Availability: In Stock
The Gbrs Group Lerna Mount Kit for Aimpoint Micro T-2 is a raised optic mount purpose-built for shooters who need a higher sight line without compromising shooting position or situational awareness. Unlike traditional low-mounted systems, the Lerna positions your optic at 2.91 inches above the rail, letting you keep your head upright and your spine vertical—the stance that matters when you're wearing body armor, communications headsets, night vision, or a gas mask. That higher line of sight means faster target identification, better situational awareness, and the athletic posture that translates to faster decision-making under pressure. Whether you're running a duty rifle, a training gun, or a defensive build, the Lerna eliminates the compromise between gear and gun handling.
Built for durability in demanding environments, the mount body is machined from 6061-T6 aluminum and finished with Type 3 Class 2 hard coat anodize. The clamp bar and screws are 17-4 stainless steel in H900 condition with Melonite QPQ finish—corrosion-resistant and tough enough for professional use. Washers are 18-8 stainless steel, passivated and black oxide finished. Everything is designed to stay tight and reliable through thousands of rounds.
Installation is straightforward with the included long-reach T10 key, 3/32-inch hex key, and quarter-inch drive T25 bit—all the tools you need to mount and zero your Aimpoint Micro T-2. The complete kit weighs just 4.8 ounces, so it won't burden your rifle's ergonomics or balance. If you're building a rifle around better ergonomics and faster target acquisition, the Lerna is a serious choice.
| Optic Centerline Height | 2.91 inches |
| Compatibility | Aimpoint Micro T-2 |
| Mount Body Material | 6061-T6 Aluminum |
| Mount Body Finish | Type 3 Class 2 Hard Coat Anodize (Black) |
| Clamp Bar Material | 17-4 PH Stainless Steel, H900 Condition |
| Clamp Bar Finish | Melonite QPQ |
| Screw Material | 17-4 PH Stainless Steel, H900 Condition |
| Screw Finish | Melonite QPQ |
| Washer Material | 18-8 Stainless Steel |
| Washer Finish | Passivated Black Oxide |
| Weight (with Aimpoint Micro T-2) | 4.8 ounces |
The kit includes the Lerna mount itself, a long-reach T10 key, a long-reach 3/32-inch hex key, and a quarter-inch drive T25 bit—everything you need to install and zero your Aimpoint Micro T-2.
Yes, the Gbrs Group Lerna Mount Kit is specifically designed for the Aimpoint Micro T-2.
The Lerna positions your optic at 2.91 inches above the rail. This raised sight line clears most communications headsets, night vision mounts, and gas masks, allowing you to maintain an upright, athletic shooting posture with your spine vertical. That posture improves situational awareness, target acquisition speed, and the ability to present body armor to threats.
The mount body is 6061-T6 aluminum with Type 3 Class 2 hard coat anodize. The clamp bar and screws are 17-4 stainless steel in H900 condition with Melonite QPQ finish, and washers are 18-8 stainless steel passivated and black oxide finished. These materials and finishes are military-grade and designed for professional and demanding field use.
SKU: 144598315 • Width: 5in • Height: 3.5in • Depth: 6.5in • Weight: 0.81oz