Gbrs Group152745177
Gbrs Group Hydra V2 Mnt Trj Mro Blk$344.99
Availability: In Stock
The Gbrs Group Hydra V2 is a dual optic mount designed specifically for the Trijicon MRO, engineered to solve a real problem on the modern tactical rifle: getting your optic high enough to see over gear without compromising the shooter's stance. Built by operators for operators, this mount positions your MRO at a 2.91" centerline—tall enough to clear communications headsets, ballistic masks, and night vision gear while keeping you in an athletic, heads-up posture. That higher sight line lets you maintain a vertical spine, which means faster target identification, better situational awareness, and a more natural relationship with body armor.
The Hydra V2 is precision-machined from 6061-T6 aluminum with a Type 3 Class 2 hard coat anodize finish (available in FDE) and backed by 17-4 PH stainless steel components throughout the clamp bar and fasteners. Everything is finished to military spec—Melonite QPQ on the steel parts, passivated black oxide on the washers—so you're looking at a mount built to last in hard use. The complete kit includes all the tools you need: a long-reach T10 hex key, a long-reach 3/32" hex key, and a ¼" drive T25 bit for installation on Trijicon MRO platforms.
If you're running a modern rifle platform where gear obstruction is a real issue, or if you simply shoot better with a higher optic center, the Hydra V2 gives you that advantage without adding unnecessary bulk. Weighs in at just 6.2 oz, so it won't throw off your balance or handling.
| Brand | Gbrs Group |
| Optic Compatibility | Trijicon MRO |
| Optic Centerline Height | 2.91" |
| Mount Material | 6061-T6 Aluminum |
| Mount Finish | Type 3 Class 2 Hard Coat Anodize (FDE) |
| Clamp Bar Material | 17-4 PH Stainless Steel (H900 Condition) |
| Clamp Bar Finish | Melonite QPQ |
| Fastener Material | 17-4 PH Stainless Steel (H900 Condition) |
| Fastener Finish | Melonite QPQ |
| Washer Material | 18-8 Stainless Steel |
| Washer Finish | Passivated Black Oxide |
| Weight | 6.2 oz |
| Included Tools | Long-reach T10 hex key, long-reach 3/32" hex key, ¼" drive T25 bit |
Yes, the Hydra V2 is designed specifically for the Trijicon MRO. The kit includes all the necessary installation tools.
The Hydra V2 positions your optic at a 2.91" centerline, which is significantly higher than standard mounting solutions. This height is specifically engineered to clear communications headsets, ballistic masks, and night vision equipment.
You receive one Hydra V2 mount for the Trijicon MRO, along with a long-reach T10 hex key, a long-reach 3/32" hex key, and a ¼" drive T25 bit for installation.
Yes. The mount is precision-machined from military-spec 6061-T6 aluminum with Type 3 Class 2 hard coat anodize finish. The clamp bar and fasteners are 17-4 PH stainless steel with Melonite QPQ finish, designed to withstand hard use and resist corrosion.
SKU: 152747120 • Weight: 1oz
Availability: In Stock
The Gbrs Group Hydra V2 is a dual optic mount designed specifically for the Trijicon MRO, engineered to solve a real problem on the modern tactical rifle: getting your optic high enough to see over gear without compromising the shooter's stance. Built by operators for operators, this mount positions your MRO at a 2.91" centerline—tall enough to clear communications headsets, ballistic masks, and night vision gear while keeping you in an athletic, heads-up posture. That higher sight line lets you maintain a vertical spine, which means faster target identification, better situational awareness, and a more natural relationship with body armor.
The Hydra V2 is precision-machined from 6061-T6 aluminum with a Type 3 Class 2 hard coat anodize finish (available in FDE) and backed by 17-4 PH stainless steel components throughout the clamp bar and fasteners. Everything is finished to military spec—Melonite QPQ on the steel parts, passivated black oxide on the washers—so you're looking at a mount built to last in hard use. The complete kit includes all the tools you need: a long-reach T10 hex key, a long-reach 3/32" hex key, and a ¼" drive T25 bit for installation on Trijicon MRO platforms.
If you're running a modern rifle platform where gear obstruction is a real issue, or if you simply shoot better with a higher optic center, the Hydra V2 gives you that advantage without adding unnecessary bulk. Weighs in at just 6.2 oz, so it won't throw off your balance or handling.
| Brand | Gbrs Group |
| Optic Compatibility | Trijicon MRO |
| Optic Centerline Height | 2.91" |
| Mount Material | 6061-T6 Aluminum |
| Mount Finish | Type 3 Class 2 Hard Coat Anodize (FDE) |
| Clamp Bar Material | 17-4 PH Stainless Steel (H900 Condition) |
| Clamp Bar Finish | Melonite QPQ |
| Fastener Material | 17-4 PH Stainless Steel (H900 Condition) |
| Fastener Finish | Melonite QPQ |
| Washer Material | 18-8 Stainless Steel |
| Washer Finish | Passivated Black Oxide |
| Weight | 6.2 oz |
| Included Tools | Long-reach T10 hex key, long-reach 3/32" hex key, ¼" drive T25 bit |
Yes, the Hydra V2 is designed specifically for the Trijicon MRO. The kit includes all the necessary installation tools.
The Hydra V2 positions your optic at a 2.91" centerline, which is significantly higher than standard mounting solutions. This height is specifically engineered to clear communications headsets, ballistic masks, and night vision equipment.
You receive one Hydra V2 mount for the Trijicon MRO, along with a long-reach T10 hex key, a long-reach 3/32" hex key, and a ¼" drive T25 bit for installation.
Yes. The mount is precision-machined from military-spec 6061-T6 aluminum with Type 3 Class 2 hard coat anodize finish. The clamp bar and fasteners are 17-4 PH stainless steel with Melonite QPQ finish, designed to withstand hard use and resist corrosion.
SKU: 152747120 • Weight: 1oz