Forward Controls Design194198987
Forward Controls Design Ar-15 Flash Suppressor Mount 1/2''X28 Thread$96.19
Availability: In Stock
Current Stock: Out of stock
The Forward Controls Design Xeno Flash Suppressor 1/2"X28 Thread is a closed-bottom muzzle device engineered for shooters who run Dead Air suppressors and need a reliable host while managing muzzle blast signature. Built on proven port geometry with 3 o'clock and 9 o'clock openings, this flash suppressor delivers meaningful performance gains—about 15 to 20% better recoil control than standard A2 spec compensators—without amplifying concussion or noise. That's the appeal: effective muzzle management on a practical platform.
What sets the Xeno apart is its integration with Dead Air's suppressor ecosystem. The flash suppressor features left-handed adapter threads that mate directly with your Xeno-compatible silencer, which means the muzzle device stays put when you break the can loose for cleaning or switching hosts. The closed bottom design also suppresses dust signature when you're prone shooting, a genuine advantage in field conditions. At 2.157" in length, it extends a 14.5" barrel to just over 16.1 inches, accounting for typical threading depth. A pin hole drilled into the base lets you lock it permanently to your barrel for stability and legal confidence, and installation is straightforward with the standard 1/2"X28 threads.
The 6315XE (this model's internal designation) works seamlessly with Dead Air's Nomad, Nomad-Ti, Primal, and Wolfman suppressor lines—as long as you're running the Xeno adapter. That compatibility matrix matters if you're building a modular rifle setup or planning to suppress multiple guns down the road. Shooters who value a flash hider that actually pulls its weight in a suppressed system, rather than just hiding under a can, will appreciate the engineering here.
| Thread Pattern | 1/2"X28 |
| Length | 2.157" |
| Added Barrel Length | 1.657" (assuming 0.5" of threads) |
| Design Type | Closed-bottom flash suppressor |
| Compatible Suppressors | Dead Air Nomad, Nomad-Ti, Primal, Wolfman (with Xeno adapter); Sierra-5 |
| Pinnable | Yes |
Yes, if you're running a Dead Air Nomad, Nomad-Ti, Primal, or Wolfman suppressor with a Xeno adapter, or a Sierra-5. The left-handed adapter threads ensure a secure, repeatable fit. You'll need the Xeno adapter if your suppressor doesn't come with one standard.
Yes. The Xeno includes a pin hole drilled on the bottom for pinning to your barrel. This is a solid option if you want a fixed, non-rotating setup or need to ensure barrel length compliance.
The suppressor itself is 2.157" long, but accounting for approximately 0.5" of barrel threads, it adds 1.657" to your barrel. On a 14.5" barrel, that brings your overall length to just over 16.1 inches.
The Xeno's port design delivers roughly 15 to 20% better recoil control than TDP spec A2 compensators, without generating additional concussion or noise—a meaningful advantage if you're shooting suppressed or in close quarters.
SKU: 194198988 • Weight: 3.43oz
Availability: In Stock
Current Stock: Out of stock
The Forward Controls Design Xeno Flash Suppressor 1/2"X28 Thread is a closed-bottom muzzle device engineered for shooters who run Dead Air suppressors and need a reliable host while managing muzzle blast signature. Built on proven port geometry with 3 o'clock and 9 o'clock openings, this flash suppressor delivers meaningful performance gains—about 15 to 20% better recoil control than standard A2 spec compensators—without amplifying concussion or noise. That's the appeal: effective muzzle management on a practical platform.
What sets the Xeno apart is its integration with Dead Air's suppressor ecosystem. The flash suppressor features left-handed adapter threads that mate directly with your Xeno-compatible silencer, which means the muzzle device stays put when you break the can loose for cleaning or switching hosts. The closed bottom design also suppresses dust signature when you're prone shooting, a genuine advantage in field conditions. At 2.157" in length, it extends a 14.5" barrel to just over 16.1 inches, accounting for typical threading depth. A pin hole drilled into the base lets you lock it permanently to your barrel for stability and legal confidence, and installation is straightforward with the standard 1/2"X28 threads.
The 6315XE (this model's internal designation) works seamlessly with Dead Air's Nomad, Nomad-Ti, Primal, and Wolfman suppressor lines—as long as you're running the Xeno adapter. That compatibility matrix matters if you're building a modular rifle setup or planning to suppress multiple guns down the road. Shooters who value a flash hider that actually pulls its weight in a suppressed system, rather than just hiding under a can, will appreciate the engineering here.
| Thread Pattern | 1/2"X28 |
| Length | 2.157" |
| Added Barrel Length | 1.657" (assuming 0.5" of threads) |
| Design Type | Closed-bottom flash suppressor |
| Compatible Suppressors | Dead Air Nomad, Nomad-Ti, Primal, Wolfman (with Xeno adapter); Sierra-5 |
| Pinnable | Yes |
Yes, if you're running a Dead Air Nomad, Nomad-Ti, Primal, or Wolfman suppressor with a Xeno adapter, or a Sierra-5. The left-handed adapter threads ensure a secure, repeatable fit. You'll need the Xeno adapter if your suppressor doesn't come with one standard.
Yes. The Xeno includes a pin hole drilled on the bottom for pinning to your barrel. This is a solid option if you want a fixed, non-rotating setup or need to ensure barrel length compliance.
The suppressor itself is 2.157" long, but accounting for approximately 0.5" of barrel threads, it adds 1.657" to your barrel. On a 14.5" barrel, that brings your overall length to just over 16.1 inches.
The Xeno's port design delivers roughly 15 to 20% better recoil control than TDP spec A2 compensators, without generating additional concussion or noise—a meaningful advantage if you're shooting suppressed or in close quarters.
SKU: 194198988 • Weight: 3.43oz