Forward Controls Design194195718
Forward Controls Design Sight Mount For Trijicon Rmr Fits Glock Mos$76.00
Availability: In Stock
Current Stock: Out of stock
The Forward Controls Design Sight Mount for Trijicon RMR footprint gives your Glock MOS slide a precision optics platform built to real combat standards. Designed in collaboration with a former USMC Shooting Team head coach, this steel adapter plate replaces Glock's factory MOS plate with a genuinely better execution of the same concept—full support for your red dot, zero unnecessary movement, and the uniform sight height that makes MOS worth adopting in the first place.
If you've run a Glock MOS setup, you know the factory plate works, but it feels like a starting point rather than a finished product. This mount addresses that. The design keeps your RMR fully cradled front and rear with integral recoil lugs so there's no play, uses the correct length screws (Torx fasteners, because that matters), and eliminates the need for an extra sealer plate. It maintains the standard MOS plate thickness, so your sight height stays consistent with your existing irons—no surprises when you transition or co-witness.
Compatible with Glock Gen 4 and Gen 5 MOS slides (G17, G19, G34, G35, G41, and G40), this plate is machined from steel and ships with everything you need: the correct sight-to-plate and plate-to-slide screws, a Torx key, and a VC3 lubricant packet. It's the kind of detail-oriented gear that comes from someone who's actually used this stuff in the field, not just designed it in a CAD file.
| Brand | Forward Controls Design |
| Optics Footprint | Trijicon RMR |
| Glock Compatibility | Gen 4 & Gen 5 MOS (G17, G19, G34, G35, G41, G40) |
| Material | Steel |
| Weight | 0.83 oz |
| Plate-to-Slide Screw Torque | 13–15 in/lbs |
| Sight-to-Plate Screw Torque | 13 in/lbs |
| Included Hardware | Plate-to-slide screws (M3×6mm), sight-to-plate screws (6/32×3/8), T10 Torx key, VC3 lubricant packet |
| Origin | Made in the USA |
Yes. The OPF-G RMR is compatible with all Glock Gen 4 and Gen 5 MOS slides, including both MOS Adapter Set 01 and Set 02. It fits G17, G19, G34, G35, G41, and G40 models.
No. This mount maintains the same plate thickness as the factory Glock MOS plate, so your existing iron sights will co-witness at the same height. No modifications or adjustments needed.
The mount ships with plate-to-slide screws (M3×6mm), sight-to-plate screws (6/32×3/8), a T10 Torx key for installation, and a VC3 lubricant packet.
The mount is designed for the Trijicon RMR footprint. Verify compatibility with your specific optic before purchase.
SKU: 194195726 • Weight: 0.1oz
Availability: In Stock
Current Stock: Out of stock
The Forward Controls Design Sight Mount for Trijicon RMR footprint gives your Glock MOS slide a precision optics platform built to real combat standards. Designed in collaboration with a former USMC Shooting Team head coach, this steel adapter plate replaces Glock's factory MOS plate with a genuinely better execution of the same concept—full support for your red dot, zero unnecessary movement, and the uniform sight height that makes MOS worth adopting in the first place.
If you've run a Glock MOS setup, you know the factory plate works, but it feels like a starting point rather than a finished product. This mount addresses that. The design keeps your RMR fully cradled front and rear with integral recoil lugs so there's no play, uses the correct length screws (Torx fasteners, because that matters), and eliminates the need for an extra sealer plate. It maintains the standard MOS plate thickness, so your sight height stays consistent with your existing irons—no surprises when you transition or co-witness.
Compatible with Glock Gen 4 and Gen 5 MOS slides (G17, G19, G34, G35, G41, and G40), this plate is machined from steel and ships with everything you need: the correct sight-to-plate and plate-to-slide screws, a Torx key, and a VC3 lubricant packet. It's the kind of detail-oriented gear that comes from someone who's actually used this stuff in the field, not just designed it in a CAD file.
| Brand | Forward Controls Design |
| Optics Footprint | Trijicon RMR |
| Glock Compatibility | Gen 4 & Gen 5 MOS (G17, G19, G34, G35, G41, G40) |
| Material | Steel |
| Weight | 0.83 oz |
| Plate-to-Slide Screw Torque | 13–15 in/lbs |
| Sight-to-Plate Screw Torque | 13 in/lbs |
| Included Hardware | Plate-to-slide screws (M3×6mm), sight-to-plate screws (6/32×3/8), T10 Torx key, VC3 lubricant packet |
| Origin | Made in the USA |
Yes. The OPF-G RMR is compatible with all Glock Gen 4 and Gen 5 MOS slides, including both MOS Adapter Set 01 and Set 02. It fits G17, G19, G34, G35, G41, and G40 models.
No. This mount maintains the same plate thickness as the factory Glock MOS plate, so your existing iron sights will co-witness at the same height. No modifications or adjustments needed.
The mount ships with plate-to-slide screws (M3×6mm), sight-to-plate screws (6/32×3/8), a T10 Torx key for installation, and a VC3 lubricant packet.
The mount is designed for the Trijicon RMR footprint. Verify compatibility with your specific optic before purchase.
SKU: 194195726 • Weight: 0.1oz