Forster197558078
Forster Products 22 Caliber Bullet Puller Collet$16.68
Availability: In Stock
The Forster Products 270 Caliber Bullet Puller Collet is a precision reloading tool designed for shooters who need to salvage or recycle loaded ammunition. If you reload 270 Winchester cartridges and occasionally encounter a round that needs disassembly—whether due to a seating error, component swap, or quality check—a collet-style bullet puller lets you extract the projectile safely and quickly without damaging it. Forster's collet design grips the bullet securely while the puller mechanism applies controlled force, making it faster and gentler than older kinetic (hammer-strike) methods.
This 270 collet is part of Forster's modular bullet puller system. The puller body works with any standard 7/8"-14 reloading press—the thread standard found on RCBS, Hornady, Lyman, Lee, and most other conventional presses—so you simply insert the collet, raise the press handle, and pull. Because each caliber requires its own collet, you'll build your collection as you reload different cartridges. Keep in mind: if you use a Forster Co-Ax Press, this system is not compatible; Forster makes dedicated tooling for that platform.
Reloaders who work up precision loads, tinker with bullet selection, or run a high-volume bench will find the collet puller indispensable. Unlike impact pullers, which can flatten or deform soft bullets, the collet method applies steady pressure and reduces waste. It's a small investment that pays for itself the first time you salvage a box of pricy match-grade ammunition.
| Caliber | 270 |
| Press Compatibility | Standard 7/8"-14 thread (conventional presses) |
| Type | Collet-style bullet puller |
| Not Compatible | Forster Co-Ax Press |
Yes, if your press has a standard 7/8"-14 threaded mounting hole. This includes RCBS, Hornady, Lyman, Lee, and most other conventional reloading presses. The one exception is the Forster Co-Ax Press, which uses a different system and requires dedicated Forster tooling.
No. This collet is caliber-specific and is sized for 270 bullets only. If you reload other cartridges and want to pull bullets from them, you'll need to purchase the appropriate collet for each caliber.
A collet puller uses a collet (a spring-loaded sleeve) to grip the bullet while steady downward pressure extracts it from the case. This method is gentler on bullets and causes less deformation than kinetic (hammer-strike) pullers, making it ideal for preserving expensive or precision projectiles.
SKU: 197558001 • Weight: 0.07oz
Availability: In Stock
The Forster Products 270 Caliber Bullet Puller Collet is a precision reloading tool designed for shooters who need to salvage or recycle loaded ammunition. If you reload 270 Winchester cartridges and occasionally encounter a round that needs disassembly—whether due to a seating error, component swap, or quality check—a collet-style bullet puller lets you extract the projectile safely and quickly without damaging it. Forster's collet design grips the bullet securely while the puller mechanism applies controlled force, making it faster and gentler than older kinetic (hammer-strike) methods.
This 270 collet is part of Forster's modular bullet puller system. The puller body works with any standard 7/8"-14 reloading press—the thread standard found on RCBS, Hornady, Lyman, Lee, and most other conventional presses—so you simply insert the collet, raise the press handle, and pull. Because each caliber requires its own collet, you'll build your collection as you reload different cartridges. Keep in mind: if you use a Forster Co-Ax Press, this system is not compatible; Forster makes dedicated tooling for that platform.
Reloaders who work up precision loads, tinker with bullet selection, or run a high-volume bench will find the collet puller indispensable. Unlike impact pullers, which can flatten or deform soft bullets, the collet method applies steady pressure and reduces waste. It's a small investment that pays for itself the first time you salvage a box of pricy match-grade ammunition.
| Caliber | 270 |
| Press Compatibility | Standard 7/8"-14 thread (conventional presses) |
| Type | Collet-style bullet puller |
| Not Compatible | Forster Co-Ax Press |
Yes, if your press has a standard 7/8"-14 threaded mounting hole. This includes RCBS, Hornady, Lyman, Lee, and most other conventional reloading presses. The one exception is the Forster Co-Ax Press, which uses a different system and requires dedicated Forster tooling.
No. This collet is caliber-specific and is sized for 270 bullets only. If you reload other cartridges and want to pull bullets from them, you'll need to purchase the appropriate collet for each caliber.
A collet puller uses a collet (a spring-loaded sleeve) to grip the bullet while steady downward pressure extracts it from the case. This method is gentler on bullets and causes less deformation than kinetic (hammer-strike) pullers, making it ideal for preserving expensive or precision projectiles.
SKU: 197558001 • Weight: 0.07oz