Forster167522549
Forster Bushing Full Length Sizing Die 6 Gt$101.40
Availability: In Stock
The Forster Bushing Full Length Sizing Die Kit with Bushings for 6mm GT gives serious reloaders a way to dial in precise neck tension on their brass while keeping the shoulder and body properly sized. This rifle die kit is built around the idea that not all cases need the same amount of neck working—by swapping bushings, you control exactly how much tension your sized brass gets, which translates to tighter groups and longer case life. It's the kind of control that separates handloading from just going through the motions.
Full-length sizing dies are standard in any rifle reloading setup, but Forster's bushing system lifts that game. Rather than a fixed sizing button, you choose a bushing that matches your needs. The die sizes the body and bumps the shoulder back just enough to chamber in a minimum-spec SAAMI rifle chamber, while the bushing manages how much the neck gets worked. Less working means less strain on brass; less strain means more reloading cycles before you retire the cases.
This kit comes ready to load for 6mm GT with three bushings included (264, 266, and 268) so you can find the bushing that pairs with your chamber and your desired neck tension. Whether you're building precision rifle ammo for hunting, competition, or load development, having multiple bushings in hand means you're not guessing—you're fine-tuning.
| Caliber | 6mm GT |
| Die Type | Full Length Sizing Die (Bushing Style) |
| Included Bushings | Three: 264, 266, 268 |
| Brand | Forster |
Each bushing (264, 266, 268) controls how much tension the die applies to your case neck. You'll pick the one that fits your chamber and matches your desired neck tension. Start with the middle bushing and work from there based on how your rounds perform at the range.
Yes. This full-length sizing die works with standard 6mm GT brass. The bushing system lets you adjust neck tension to match your specific rifle and chamber.
A standard die uses a fixed button to size the neck. The Forster bushing system lets you swap bushings to control neck tension independently, giving you more precision and the ability to reduce how much the brass gets worked on each reload.
This is a sizing die, so you'll still need a separate decapping die (or decapping pin) and a seating die to complete your 6mm GT reloading setup. You'll also need a reloading press compatible with standard dies.
SKU: 167525226 • Width: 2in • Height: 2in • Depth: 6.75in • Weight: 0.5oz
Availability: In Stock
The Forster Bushing Full Length Sizing Die Kit with Bushings for 6mm GT gives serious reloaders a way to dial in precise neck tension on their brass while keeping the shoulder and body properly sized. This rifle die kit is built around the idea that not all cases need the same amount of neck working—by swapping bushings, you control exactly how much tension your sized brass gets, which translates to tighter groups and longer case life. It's the kind of control that separates handloading from just going through the motions.
Full-length sizing dies are standard in any rifle reloading setup, but Forster's bushing system lifts that game. Rather than a fixed sizing button, you choose a bushing that matches your needs. The die sizes the body and bumps the shoulder back just enough to chamber in a minimum-spec SAAMI rifle chamber, while the bushing manages how much the neck gets worked. Less working means less strain on brass; less strain means more reloading cycles before you retire the cases.
This kit comes ready to load for 6mm GT with three bushings included (264, 266, and 268) so you can find the bushing that pairs with your chamber and your desired neck tension. Whether you're building precision rifle ammo for hunting, competition, or load development, having multiple bushings in hand means you're not guessing—you're fine-tuning.
| Caliber | 6mm GT |
| Die Type | Full Length Sizing Die (Bushing Style) |
| Included Bushings | Three: 264, 266, 268 |
| Brand | Forster |
Each bushing (264, 266, 268) controls how much tension the die applies to your case neck. You'll pick the one that fits your chamber and matches your desired neck tension. Start with the middle bushing and work from there based on how your rounds perform at the range.
Yes. This full-length sizing die works with standard 6mm GT brass. The bushing system lets you adjust neck tension to match your specific rifle and chamber.
A standard die uses a fixed button to size the neck. The Forster bushing system lets you swap bushings to control neck tension independently, giving you more precision and the ability to reduce how much the brass gets worked on each reload.
This is a sizing die, so you'll still need a separate decapping die (or decapping pin) and a seating die to complete your 6mm GT reloading setup. You'll also need a reloading press compatible with standard dies.
SKU: 167525226 • Width: 2in • Height: 2in • Depth: 6.75in • Weight: 0.5oz