Forster167523430
Forster Bench Rest Ultra Micrometer Seater Die 8.6 Blackout$121.54
Loading...
Loading...
Loading...
Availability: In Stock
The Forster Bench Rest 7mm PRC Ultra Micrometer Seater Die gives you the precision control serious reloaders demand when fine-tuning bullet seating. If you're handloading ammunition and want to dial in your seating depth to match your rifle's throat with repeatable accuracy, this die does the heavy lifting. The micrometer adjustment lets you make micro-adjustments in .0005" to .001" increments, so you're not fumbling with tiny movements or guessing—you turn the knob and you know exactly where your bullet sits. That precision matters when you're chasing tight groups at distance or building ammo that shoots identically from one round to the next.
Forster built this die from quality steel and machined it to tight tolerances, then hand-polished it before and after heat treatment to ensure a smooth, durable finish that'll last through thousands of rounds. The Cross Bolt Die Locking Ring (Forster's design) tightens from both ends of the split ring instead of screwing directly into the die threads, which keeps your die secure without risking thread damage. That's the kind of thought that separates a tool you trust from one you babysit.
The real convenience here is switching between bullets without losing your zero. Record your seating depth for one bullet profile, swap to another, dial back to your previous setting, and you're ready to seat. No trial and error, no second-guessing. If you're loading for 7mm PRC and want the control to optimize your loads to your specific rifle's chamber, this micrometer seater earns its place on your reloading bench.
| Caliber | 7mm PRC |
| Type | Ultra Micrometer Seater Die |
| Micrometer Adjustment Range | .0005" to .001" increments |
| Manufacturer | Forster |
The micrometer lets you adjust seating depth in .0005" to .001" increments with repeatable precision. You can record your setting, switch bullets, and dial back to the exact same depth every time—no guessing or trial-and-error adjustments.
Yes. The tight tolerances and micrometer control make this die well-suited to handloaders who want to optimize bullet seating to their rifle's throat and produce consistent, accurate ammunition.
Forster's Cross Bolt design tightens both ends of the split ring instead of screwing a single screw directly into the die threads. This keeps your die secure while protecting the threads from damage.
This die is caliber-specific to 7mm PRC. You would need a separate die for other calibers.
SKU: 167522554 • Width: 2in • Height: 2in • Depth: 7in • Weight: 0.655oz
Availability: In Stock
The Forster Bench Rest 7mm PRC Ultra Micrometer Seater Die gives you the precision control serious reloaders demand when fine-tuning bullet seating. If you're handloading ammunition and want to dial in your seating depth to match your rifle's throat with repeatable accuracy, this die does the heavy lifting. The micrometer adjustment lets you make micro-adjustments in .0005" to .001" increments, so you're not fumbling with tiny movements or guessing—you turn the knob and you know exactly where your bullet sits. That precision matters when you're chasing tight groups at distance or building ammo that shoots identically from one round to the next.
Forster built this die from quality steel and machined it to tight tolerances, then hand-polished it before and after heat treatment to ensure a smooth, durable finish that'll last through thousands of rounds. The Cross Bolt Die Locking Ring (Forster's design) tightens from both ends of the split ring instead of screwing directly into the die threads, which keeps your die secure without risking thread damage. That's the kind of thought that separates a tool you trust from one you babysit.
The real convenience here is switching between bullets without losing your zero. Record your seating depth for one bullet profile, swap to another, dial back to your previous setting, and you're ready to seat. No trial and error, no second-guessing. If you're loading for 7mm PRC and want the control to optimize your loads to your specific rifle's chamber, this micrometer seater earns its place on your reloading bench.
| Caliber | 7mm PRC |
| Type | Ultra Micrometer Seater Die |
| Micrometer Adjustment Range | .0005" to .001" increments |
| Manufacturer | Forster |
The micrometer lets you adjust seating depth in .0005" to .001" increments with repeatable precision. You can record your setting, switch bullets, and dial back to the exact same depth every time—no guessing or trial-and-error adjustments.
Yes. The tight tolerances and micrometer control make this die well-suited to handloaders who want to optimize bullet seating to their rifle's throat and produce consistent, accurate ammunition.
Forster's Cross Bolt design tightens both ends of the split ring instead of screwing a single screw directly into the die threads. This keeps your die secure while protecting the threads from damage.
This die is caliber-specific to 7mm PRC. You would need a separate die for other calibers.
SKU: 167522554 • Width: 2in • Height: 2in • Depth: 7in • Weight: 0.655oz