Faxon Firearms167529436
Faxon Firearms Fx7 Bolt Action Prefit 6.5 Cm 24'' M24 Bbl Nitride$307.12
Availability: In Stock
The Faxon Firearms FX7 bolt action prefit 6.5 Creedmoor barrel is engineered as a direct fit for the Faxon FX7 action, eliminating guesswork and custom fitting when you're upgrading or building out your precision rifle. Built from 416-R stainless steel and finished with a salt bath nitride coating, this 20-inch Gunner profile barrel balances thermal mass with manageable weight—2.45 lbs of no-nonsense construction that holds up to repeated fire and cleaning cycles. The 1:8 twist rate is optimized for the 6.5 Creedmoor cartridge across the range of bullet weights serious hunters and long-range shooters rely on.
This is a prefit barrel, meaning you're not machining anything—the tenon is already cut to spec (1.0625" x 16 TPI), the muzzle is threaded for suppressors or muzzle devices (5/8x24), and the recessed target crown is finished and ready to shoot. The 5R button rifling and honed/lapped bore reduce fouling and deliver consistent velocity, while magnetic particle inspection catches internal defects before they matter. If you're running an FX7 action, this barrel threads on and functions seamlessly without trips to the gunsmith.
The Gunner profile sits between a lightweight sporter and a heavy bench barrel—a practical choice for field hunters who want precision without dragging an extra pound into the hills, and for shooters who want thermal stability without excessive bulk. The nitride finish provides excellent corrosion resistance with minimal aesthetic fuss; it's a working barrel for working shooters.
| Caliber | 6.5 Creedmoor |
| Barrel Length | 20" |
| Material | 416-R Stainless Steel |
| Finish | Salt Bath Nitride |
| Barrel Profile | Gunner |
| Rifling Type | 5R Button Rifled, Honed & Lapped |
| Twist Rate | 1:8 |
| Tenon | 1.0625" x 16 TPI |
| Muzzle Thread | 5/8x24 |
| Crown | Recessed Target Crown |
| Weight | 2.45 lbs |
| Compatibility | Faxon FX7 Action |
Yes. This barrel is a prefit for the Faxon FX7 action; the tenon and thread pitch are cut to spec, so it threads directly onto your FX7 receiver without custom gunsmithing.
The muzzle is threaded 5/8x24, the standard thread pitch for 6.5 Creedmoor suppressors, brakes, and flash hiders. Any suppressor or device with 5/8x24 threading will fit.
Yes. The 20-inch length and Gunner profile make it a practical field barrel for 6.5 Creedmoor hunting rifles, offering good velocity and thermal stability without excessive weight.
The 1:8 twist is optimized to stabilize the range of bullet weights commonly used in 6.5 Creedmoor, from lighter target rounds to heavier hunting loads, across different velocity and distance scenarios.
SKU: 167529442 • Weight: 4.75oz
Availability: In Stock
The Faxon Firearms FX7 bolt action prefit 6.5 Creedmoor barrel is engineered as a direct fit for the Faxon FX7 action, eliminating guesswork and custom fitting when you're upgrading or building out your precision rifle. Built from 416-R stainless steel and finished with a salt bath nitride coating, this 20-inch Gunner profile barrel balances thermal mass with manageable weight—2.45 lbs of no-nonsense construction that holds up to repeated fire and cleaning cycles. The 1:8 twist rate is optimized for the 6.5 Creedmoor cartridge across the range of bullet weights serious hunters and long-range shooters rely on.
This is a prefit barrel, meaning you're not machining anything—the tenon is already cut to spec (1.0625" x 16 TPI), the muzzle is threaded for suppressors or muzzle devices (5/8x24), and the recessed target crown is finished and ready to shoot. The 5R button rifling and honed/lapped bore reduce fouling and deliver consistent velocity, while magnetic particle inspection catches internal defects before they matter. If you're running an FX7 action, this barrel threads on and functions seamlessly without trips to the gunsmith.
The Gunner profile sits between a lightweight sporter and a heavy bench barrel—a practical choice for field hunters who want precision without dragging an extra pound into the hills, and for shooters who want thermal stability without excessive bulk. The nitride finish provides excellent corrosion resistance with minimal aesthetic fuss; it's a working barrel for working shooters.
| Caliber | 6.5 Creedmoor |
| Barrel Length | 20" |
| Material | 416-R Stainless Steel |
| Finish | Salt Bath Nitride |
| Barrel Profile | Gunner |
| Rifling Type | 5R Button Rifled, Honed & Lapped |
| Twist Rate | 1:8 |
| Tenon | 1.0625" x 16 TPI |
| Muzzle Thread | 5/8x24 |
| Crown | Recessed Target Crown |
| Weight | 2.45 lbs |
| Compatibility | Faxon FX7 Action |
Yes. This barrel is a prefit for the Faxon FX7 action; the tenon and thread pitch are cut to spec, so it threads directly onto your FX7 receiver without custom gunsmithing.
The muzzle is threaded 5/8x24, the standard thread pitch for 6.5 Creedmoor suppressors, brakes, and flash hiders. Any suppressor or device with 5/8x24 threading will fit.
Yes. The 20-inch length and Gunner profile make it a practical field barrel for 6.5 Creedmoor hunting rifles, offering good velocity and thermal stability without excessive weight.
The 1:8 twist is optimized to stabilize the range of bullet weights commonly used in 6.5 Creedmoor, from lighter target rounds to heavier hunting loads, across different velocity and distance scenarios.
SKU: 167529442 • Weight: 4.75oz