Faxon Firearms121687972
Faxon Firearms Nitride 308/6.5 Creedmoor/8.6 Bolt Carrier Group (FF308BCGCNITRIDE02)$201.48
Loading...
Loading...
Loading...
Availability: In Stock
The Faxon Firearms 6.5 Grendel Type 2 Complete Bolt Carrier Group (BCG) is a precision-engineered rifle part built for shooters who demand reliability and durability in an intermediate cartridge platform. Built around a Type II (.136") bolt machined from 9310 tool steel, this BCG goes beyond mil-spec baseline with a salt bath nitriding process that hardens the bolt and carrier while resisting corrosion far better than traditional chrome or phosphate finishes. Whether you're running hand-loaded ammunition at high pressure or pushing a lightweight action hard, the 45-degree chamfered bolt lugs are designed to cycle reliably under stress.
Every bolt undergoes full magnetic particle inspection (MPI) testing to catch material defects before they become failures downrange. The assembly comes fully assembled with the extractor, spring, insert, and o-ring already installed, so you can drop it straight into your receiver. The S7 extractor and shot-peened finish meet MIL-SPEC standards, but the combination of 9310 steel, nitriding, and precision machining makes this carrier a step above generic mil-spec replacements—especially valuable if you're running a 6.5 Grendel rifle hard or building a precision rifle on a non-standard receiver.
If you're upgrading from a stock carrier or building a new 6.5 Grendel rifle, this Faxon BCG delivers the material science and QC that translates to fewer stoppages and longer service life. It's the kind of parts-bin detail that separates a reliable shooter from one that's always troubleshooting.
| Brand | Faxon Firearms |
| Product Type | Complete Bolt Carrier Group (BCG) |
| Caliber Compatibility | 6.5 Grendel |
| Bolt Type | Type II (.136") |
| Bolt Material | 9310 Tool Steel |
| Carrier Material | Hardened steel (salt bath nitrided) |
| Extractor | S7 |
| Finish | Salt bath nitrided; MIL-SPEC shot peened |
| Heat Treatment | Full MIL-SPEC |
| Bolt Lug Design | 45-degree chamfered |
| Quality Assurance | Magnetic particle inspection (MPI) tested |
| Assembly Status | Complete; spring, insert, and o-ring pre-installed |
A Type II bolt has a .136" diameter firing pin, which is the standard for intermediate rifle cartridges like 6.5 Grendel. Faxon's Type II design uses 9310 tool steel and 45-degree chamfered lugs to handle the pressures and cycling demands of the cartridge reliably, especially under rapid fire or hand-loaded ammunition at the high end of safe pressure.
Yes. The bolt carrier group comes fully assembled with the extractor, spring, insert, and o-ring already installed. You can drop it directly into your receiver.
Faxon uses salt bath nitriding on both the bolt and carrier, which increases surface hardness and decreases friction compared to standard chrome or phosphate finishes. Nitriding also delivers superior corrosion resistance, meaning your BCG will hold up better in wet or harsh conditions over the long term.
Yes. Every bolt undergoes magnetic particle inspection (MPI) testing to ensure the material is sound and free of defects before the carrier is assembled and shipped.
SKU: 126513872 • Width: 4in • Height: 2.25in • Depth: 11in • Weight: 0.81oz
Availability: In Stock
The Faxon Firearms 6.5 Grendel Type 2 Complete Bolt Carrier Group (BCG) is a precision-engineered rifle part built for shooters who demand reliability and durability in an intermediate cartridge platform. Built around a Type II (.136") bolt machined from 9310 tool steel, this BCG goes beyond mil-spec baseline with a salt bath nitriding process that hardens the bolt and carrier while resisting corrosion far better than traditional chrome or phosphate finishes. Whether you're running hand-loaded ammunition at high pressure or pushing a lightweight action hard, the 45-degree chamfered bolt lugs are designed to cycle reliably under stress.
Every bolt undergoes full magnetic particle inspection (MPI) testing to catch material defects before they become failures downrange. The assembly comes fully assembled with the extractor, spring, insert, and o-ring already installed, so you can drop it straight into your receiver. The S7 extractor and shot-peened finish meet MIL-SPEC standards, but the combination of 9310 steel, nitriding, and precision machining makes this carrier a step above generic mil-spec replacements—especially valuable if you're running a 6.5 Grendel rifle hard or building a precision rifle on a non-standard receiver.
If you're upgrading from a stock carrier or building a new 6.5 Grendel rifle, this Faxon BCG delivers the material science and QC that translates to fewer stoppages and longer service life. It's the kind of parts-bin detail that separates a reliable shooter from one that's always troubleshooting.
| Brand | Faxon Firearms |
| Product Type | Complete Bolt Carrier Group (BCG) |
| Caliber Compatibility | 6.5 Grendel |
| Bolt Type | Type II (.136") |
| Bolt Material | 9310 Tool Steel |
| Carrier Material | Hardened steel (salt bath nitrided) |
| Extractor | S7 |
| Finish | Salt bath nitrided; MIL-SPEC shot peened |
| Heat Treatment | Full MIL-SPEC |
| Bolt Lug Design | 45-degree chamfered |
| Quality Assurance | Magnetic particle inspection (MPI) tested |
| Assembly Status | Complete; spring, insert, and o-ring pre-installed |
A Type II bolt has a .136" diameter firing pin, which is the standard for intermediate rifle cartridges like 6.5 Grendel. Faxon's Type II design uses 9310 tool steel and 45-degree chamfered lugs to handle the pressures and cycling demands of the cartridge reliably, especially under rapid fire or hand-loaded ammunition at the high end of safe pressure.
Yes. The bolt carrier group comes fully assembled with the extractor, spring, insert, and o-ring already installed. You can drop it directly into your receiver.
Faxon uses salt bath nitriding on both the bolt and carrier, which increases surface hardness and decreases friction compared to standard chrome or phosphate finishes. Nitriding also delivers superior corrosion resistance, meaning your BCG will hold up better in wet or harsh conditions over the long term.
Yes. Every bolt undergoes magnetic particle inspection (MPI) testing to ensure the material is sound and free of defects before the carrier is assembled and shipped.
SKU: 126513872 • Width: 4in • Height: 2.25in • Depth: 11in • Weight: 0.81oz