Evolution Outdoor200189675
EVODS LIBERATOR DOUBLE AR CASE BLK$229.99
Availability: In Stock
The Evolution Outdoor Liberator single AR case is a hard-shell long gun case built to protect your rifle through whatever conditions you throw at it. Whether you're heading to the range, on a hunting trip, flying to a distant hunt, or storing gear long-term, this case combines rugged construction with a thoughtful interior layout designed specifically to accommodate most standard scoped AR-style firearms and similar long guns.
Built from reinforced polypropylene, the Liberator is engineered to resist crushing, impacts, and rough handling while maintaining its seal against the elements. The case is rated IP67 for waterproof and dustproof protection—a meaningful standard that means your rifle stays dry and clean even in wet conditions or dusty environments. Heavy-duty latches keep the case sealed during transport, and dual padlock hasps offer TSA-approved security for air travel or anytime you need extra assurance your gear stays put.
The interior is where the Liberator earns its keep. Customizable pick-and-pluck foam lets you create a layout that fits your exact rifle and accessory setup rather than forcing your gear into a pre-cut mold. An egg-crate foam layer in the lid and a solid base layer cushion against drops and vibration, keeping components stable in transit. A pressure equalization valve prevents vacuum-lock situations and makes opening the case easier after temperature swings or altitude changes.
With exterior dimensions of 38.8" × 17.1" × 7.15" and usable interior space of 36.61" × 14.02" × 5.98", the case fits in vehicles, storage closets, and overhead bins. It's a straightforward, no-nonsense option for anyone who shoots AR-platform rifles and needs reliable protection without pretense.
| Manufacturer | Evolution Outdoor |
| Model | Liberator PX-1845 |
| Type | Hard long gun case |
| Material | Reinforced polypropylene |
| Rating | IP67 waterproof and dustproof |
| Exterior Dimensions | 38.8" × 17.1" × 7.15" |
| Interior Dimensions | 36.61" × 14.02" × 5.98" |
| Foam Interior | Customizable pick-and-pluck with egg-crate lid and solid base layers |
| Locking | Heavy-duty latches, dual padlock hasps (TSA-approved) |
| Pressure Relief | Yes—equalization valve |
The Liberator is designed to accommodate most standard scoped AR-style rifles. With an interior length of 36.61" and width of 14.02", it will handle typical AR configurations. If you have an unusually long setup (think 20"+ barrels with extended optic rails), measure your rifle before assuming fit.
Yes. The case features TSA-approved dual padlock hasps, making it compliant for air travel. You'll need to follow TSA and airline regulations for transporting firearms and ammunition, but the case itself meets the security standards for checked baggage.
The foam interior consists of small cubes you can pull out by hand to create a custom cavity for your rifle and accessories. Unlike pre-cut foam, this approach lets you fit whatever you own without wasting space or cramming gear into a one-size-fits-all layout.
The case is rated IP67, which means it resists water and dust ingress in typical outdoor conditions. The seal is maintained by the heavy-duty latches and the foam interior helps minimize internal condensation, making it suitable for storage in sheds, vehicles, or humid environments.
SKU: 200189677 • Width: 17.25in • Height: 7.5in • Depth: 39in • Weight: 219oz
Availability: In Stock
The Evolution Outdoor Liberator single AR case is a hard-shell long gun case built to protect your rifle through whatever conditions you throw at it. Whether you're heading to the range, on a hunting trip, flying to a distant hunt, or storing gear long-term, this case combines rugged construction with a thoughtful interior layout designed specifically to accommodate most standard scoped AR-style firearms and similar long guns.
Built from reinforced polypropylene, the Liberator is engineered to resist crushing, impacts, and rough handling while maintaining its seal against the elements. The case is rated IP67 for waterproof and dustproof protection—a meaningful standard that means your rifle stays dry and clean even in wet conditions or dusty environments. Heavy-duty latches keep the case sealed during transport, and dual padlock hasps offer TSA-approved security for air travel or anytime you need extra assurance your gear stays put.
The interior is where the Liberator earns its keep. Customizable pick-and-pluck foam lets you create a layout that fits your exact rifle and accessory setup rather than forcing your gear into a pre-cut mold. An egg-crate foam layer in the lid and a solid base layer cushion against drops and vibration, keeping components stable in transit. A pressure equalization valve prevents vacuum-lock situations and makes opening the case easier after temperature swings or altitude changes.
With exterior dimensions of 38.8" × 17.1" × 7.15" and usable interior space of 36.61" × 14.02" × 5.98", the case fits in vehicles, storage closets, and overhead bins. It's a straightforward, no-nonsense option for anyone who shoots AR-platform rifles and needs reliable protection without pretense.
| Manufacturer | Evolution Outdoor |
| Model | Liberator PX-1845 |
| Type | Hard long gun case |
| Material | Reinforced polypropylene |
| Rating | IP67 waterproof and dustproof |
| Exterior Dimensions | 38.8" × 17.1" × 7.15" |
| Interior Dimensions | 36.61" × 14.02" × 5.98" |
| Foam Interior | Customizable pick-and-pluck with egg-crate lid and solid base layers |
| Locking | Heavy-duty latches, dual padlock hasps (TSA-approved) |
| Pressure Relief | Yes—equalization valve |
The Liberator is designed to accommodate most standard scoped AR-style rifles. With an interior length of 36.61" and width of 14.02", it will handle typical AR configurations. If you have an unusually long setup (think 20"+ barrels with extended optic rails), measure your rifle before assuming fit.
Yes. The case features TSA-approved dual padlock hasps, making it compliant for air travel. You'll need to follow TSA and airline regulations for transporting firearms and ammunition, but the case itself meets the security standards for checked baggage.
The foam interior consists of small cubes you can pull out by hand to create a custom cavity for your rifle and accessories. Unlike pre-cut foam, this approach lets you fit whatever you own without wasting space or cramming gear into a one-size-fits-all layout.
The case is rated IP67, which means it resists water and dust ingress in typical outdoor conditions. The seal is maintained by the heavy-duty latches and the foam interior helps minimize internal condensation, making it suitable for storage in sheds, vehicles, or humid environments.
SKU: 200189677 • Width: 17.25in • Height: 7.5in • Depth: 39in • Weight: 219oz