EoTech EXPS3 Tan Holosight - 68 MOA Ring with Dual 1 MOA Dots, CR123 Battery Included

The EoTech EXPS3 tan holosight brings true two-eyes-open shooting to close-quarters rifle setups, carbines, and CQB platforms where speed and situational awareness matter most. Built on a proven design trusted by U.S. Special Operations Command, this compact reflex sight pairs a 68 MOA ring with dual 1 MOA center dots—a reticle geometry that lets you engage fast at any distance while maintaining a crystal-clear sight picture. The low-profile 7mm raised base preserves co-witness with backup iron sights and keeps the optic in the fight.

Quick target acquisition is the whole point of a holosight, and the EXPS3 delivers. Its side-button operation keeps your firing hand steady, while the adjustable quick-detach lever mounts to standard Weaver or MIL-STD 1913 rails with repeatable accuracy to 1 MOA after remounting. Night vision compatible across Gen I through III+ devices, the EXPS3 runs 20 daylight brightness levels plus 10 additional NV settings, letting you stay operational from first light to after dark. A single CR123 battery (included) powers 1,000 continuous hours at nominal brightness—roughly 40 days of runtime without a battery swap.

Weather resistance to 33 feet of water depth and an operating envelope from –40°F to 140°F mean this sight keeps running in conditions where lesser optics fade. The compact footprint (3.8" × 2.3" × 2.9") and featherweight 11.2 oz profile won't bog down a rifle build or slow your transitions. Made in the USA, the EXPS3 comes with a protective case, quick-start guide, warranty card, and that CR123 battery ready to go.

Key Features

• 68 MOA ring with dual 1 MOA dots for fast target transitions and precision holds
• Two-eyes-open shooting design for maximum situational awareness and speed
• 7mm raised base allows co-witness with backup iron sights
• Night vision compatible (Gen I through III+) with 10 dedicated NV brightness settings
• Quick-detach lever for Weaver and MIL-STD 1913 rails; repeatable to 1 MOA after remounting
• 20 daylight brightness settings for any lighting condition
• 1,000 hours continuous battery life on one CR123 cell
• Water-resistant to 33 feet; operates from –40°F to 140°F
• Compact, lightweight design (11.2 oz) minimizes rifle balance impact
• Made in USA with quick-start guide, protective case, and battery included

Specifications

Reticle	68 MOA ring with dual 1 MOA dots
Mount	1" Weaver or MIL-STD-1913 rail
Adjustment	0.5 MOA per click windage and elevation
Brightness Settings	20 daylight + 10 night vision levels
Power Source	1 × CR123 lithium battery (included)
Battery Life	1,000 continuous hours at nominal setting
Night Vision	Compatible with Gen I–III+ devices
Water Resistance	33 feet (10 m) depth
Operating Temperature	–40°F to 140°F (–40°C to 60°C)
Dimensions	3.8" L × 2.3" W × 2.9" H (96.5 × 58.4 × 73.7 mm)
Weight	11.2 oz (317.5 g)
Quick-Detach	Adjustable lever; repeatable to 1 MOA
Included	CR123 battery, protective case, quick-start guide, warranty card
Origin	Made in USA

Frequently Asked Questions

Can I use the EXPS3 with backup iron sights?

Yes. The 7mm raised base allows the sight to co-witness with standard backup iron sights mounted on the same rail, letting you keep irons in the fight as a backup or secondary aiming reference.

Is the EoTech EXPS3 night vision compatible?

Absolutely. The EXPS3 is night vision compatible and features 10 dedicated brightness settings optimized for Gen I through Gen III+ night vision devices, making it a solid choice for low-light and nocturnal operations.

How long does the CR123 battery last?

The included CR123 battery provides 1,000 continuous hours of runtime at the nominal brightness setting 12. That's roughly 40 days of non-stop use on a single battery, or months of typical daily operation.

What's included in the box?

The EXPS3 ships with the holosight, one CR123 battery pre-installed, a protective case, quick-start guide, and a warranty card. It's ready to mount and run straight out of the box.