Elftmann Tactical121688636
Elftmann Tactical Match Pro Curved Trigger - Black (MATCHPRO-C)$249.00
Availability: In Stock
The Elftmann Match Pro curved trigger is a precision AR-15 drop-in trigger built for shooters who demand crisp, predictable breaks and zero tolerance for slop. Unlike traditional pin-mounted systems that inherently allow play in the trigger assembly, the Match Pro uses a proprietary threaded mounting design to lock everything down solid—the difference is something you have to feel to fully appreciate. If you're running a competitive rifle, hunting setup, or precision build where every shot counts, this curved-shoe trigger transforms how your rifle responds.
The Match Pro ships ready to install in any standard mil-spec AR-15 lower receiver and takes minutes to drop in with the supplied screws. What sets it apart is adjustability: pull weight ranges from 2.75 to 4 pounds and can be dialed in on the fly without disassembling anything from your lower. The trigger itself is wire EDM machined from hardened A2 tool steel, paired with lightweight aircraft-grade aluminum, and rides on sealed aerospace-grade bearings for a smooth, fast reset. The result feels more like a finely tuned custom 1911 trigger than a factory AR—minimal takeup, glass-rod break, and nearly zero over-travel.
Pull weight comes factory-set roughly 50 percent lighter than a standard AR trigger, giving you speed and control in one package. Needle bearings on both trigger and hammer surfaces keep the action running smooth under heavy use, and the proprietary double-double torsion hammer spring ensures reliable primer ignition across any caliber (.223, 9mm, .308, and beyond). The disconnect design uses a full quarter-inch width to prevent wear and double-firing. Whether you're a competition shooter, hunter, collector, or someone building a precision rifle, the Match Pro curved trigger is an upgrade that shoots like one.
| Trigger Type | Drop-in curved trigger assembly |
| Mounting System | Proprietary threaded (not pin-mounted) |
| Pull Weight Range | 2.75 lbs to 4 lbs (adjustable) |
| Pull Weight Adjustment | Adjustable without removing from lower receiver |
| Material | Hardened A2 tool steel and aircraft-grade aluminum |
| Bearing System | Sealed aerospace-grade needle bearings |
| Hammer Spring | Proprietary double-double torsion spring |
| Compatibility | Standard mil-spec AR-15 lower receivers; all calibers |
| Installation | Drop-in; supplied installation screws |
| Trigger Shoe | Curved (straight shoe option available) |
Yes, provided your lower is a standard mil-spec AR-15. The Match Pro is not compatible with large-pin Colt-platform lowers. It works with all calibers—.223/5.56, 9mm, .308, and others—because it uses a universal hammer/trigger configuration.
Installation is straightforward and takes minutes using the supplied screws—no gunsmithing required. Pull weight adjustment is even easier: the incremental adjustable knob lets you dial in your preferred weight from 2.75 to 4 pounds without removing the trigger from your lower receiver.
Traditional pin-mounted AR triggers have inherent play because pins need clearance to fit through the holes. The Match Pro's proprietary threaded system locks the trigger and hammer assembly directly into place with no slop, resulting in a tighter, more responsive feel that serious precision shooters and competitors notice immediately.
Yes. The Match Pro is drop-safe across its entire pull-weight range, meaning it will not fire if the rifle is dropped or jarred, regardless of your chosen pull weight setting.
SKU: 115648482 • Width: 4in • Height: 1in • Depth: 7in • Weight: 0.25oz
Availability: In Stock
The Elftmann Match Pro curved trigger is a precision AR-15 drop-in trigger built for shooters who demand crisp, predictable breaks and zero tolerance for slop. Unlike traditional pin-mounted systems that inherently allow play in the trigger assembly, the Match Pro uses a proprietary threaded mounting design to lock everything down solid—the difference is something you have to feel to fully appreciate. If you're running a competitive rifle, hunting setup, or precision build where every shot counts, this curved-shoe trigger transforms how your rifle responds.
The Match Pro ships ready to install in any standard mil-spec AR-15 lower receiver and takes minutes to drop in with the supplied screws. What sets it apart is adjustability: pull weight ranges from 2.75 to 4 pounds and can be dialed in on the fly without disassembling anything from your lower. The trigger itself is wire EDM machined from hardened A2 tool steel, paired with lightweight aircraft-grade aluminum, and rides on sealed aerospace-grade bearings for a smooth, fast reset. The result feels more like a finely tuned custom 1911 trigger than a factory AR—minimal takeup, glass-rod break, and nearly zero over-travel.
Pull weight comes factory-set roughly 50 percent lighter than a standard AR trigger, giving you speed and control in one package. Needle bearings on both trigger and hammer surfaces keep the action running smooth under heavy use, and the proprietary double-double torsion hammer spring ensures reliable primer ignition across any caliber (.223, 9mm, .308, and beyond). The disconnect design uses a full quarter-inch width to prevent wear and double-firing. Whether you're a competition shooter, hunter, collector, or someone building a precision rifle, the Match Pro curved trigger is an upgrade that shoots like one.
| Trigger Type | Drop-in curved trigger assembly |
| Mounting System | Proprietary threaded (not pin-mounted) |
| Pull Weight Range | 2.75 lbs to 4 lbs (adjustable) |
| Pull Weight Adjustment | Adjustable without removing from lower receiver |
| Material | Hardened A2 tool steel and aircraft-grade aluminum |
| Bearing System | Sealed aerospace-grade needle bearings |
| Hammer Spring | Proprietary double-double torsion spring |
| Compatibility | Standard mil-spec AR-15 lower receivers; all calibers |
| Installation | Drop-in; supplied installation screws |
| Trigger Shoe | Curved (straight shoe option available) |
Yes, provided your lower is a standard mil-spec AR-15. The Match Pro is not compatible with large-pin Colt-platform lowers. It works with all calibers—.223/5.56, 9mm, .308, and others—because it uses a universal hammer/trigger configuration.
Installation is straightforward and takes minutes using the supplied screws—no gunsmithing required. Pull weight adjustment is even easier: the incremental adjustable knob lets you dial in your preferred weight from 2.75 to 4 pounds without removing the trigger from your lower receiver.
Traditional pin-mounted AR triggers have inherent play because pins need clearance to fit through the holes. The Match Pro's proprietary threaded system locks the trigger and hammer assembly directly into place with no slop, resulting in a tighter, more responsive feel that serious precision shooters and competitors notice immediately.
Yes. The Match Pro is drop-safe across its entire pull-weight range, meaning it will not fire if the rifle is dropped or jarred, regardless of your chosen pull weight setting.
SKU: 115648482 • Width: 4in • Height: 1in • Depth: 7in • Weight: 0.25oz