EGW197556133
Egw Winchester 70 Short Action 0 Moa$35.99
Availability: In Stock
The EGW Winchester 70 Short Action scope base delivers a rock-solid one-piece Picatinny rail solution for your Winchester 70, engineered to mount directly to factory receiver holes with zero drilling or tapping required. Built from precision-machined 6061 T6 aluminum, this 20 MOA base combines lightweight construction with tactical-grade rigidity—ideal for hunters and shooters who demand repeatable accuracy on their bolt-action platform without gunsmithing hassle.
The full-width Picatinny slots conform to MIL-STD 1913 specs (±.002"), so you have total freedom choosing Picatinny or Weaver rings and adjusting eye relief to suit your optic and shooting position. The milled center channel reduces weight where it counts, and the one-piece design eliminates the precision losses that come with split or two-ring bases. Whether you're building a long-range rig or a close-quarters hunting setup, this base gives you the flexibility to dial in exactly what works for your gun.
Installation is straightforward: the base uses socket head Torx screws (wrench included) and EGW recommends 20 inch-pounds of torque plus a drop of blue Loctite to keep everything locked in place. No guesswork, no surprises—just a purpose-built mount that respects your Winchester 70's legacy while modernizing its optics capability.
| Manufacturer | EGW |
| Platform | Winchester 70 Short Action |
| Design | One-Piece Picatinny Base |
| Material | 6061 T6 Extruded Aluminum |
| MOA Cant | 20 MOA |
| Rail Standard | MIL-STD 1913 (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| Installation | Direct-Fit to factory receiver holes; socket head Torx screws included |
| Torque Spec | 20 inch-pounds (blue Loctite recommended) |
Yes. The EGW base is engineered to mount directly to the factory scope mount holes on Winchester 70 short-action receivers. No gunsmithing required.
The base accepts both Picatinny and Weaver rings, giving you flexibility in ring choice while maintaining the precision slot spacing specified in MIL-STD 1913.
The mount includes socket head Torx screws and a wrench. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
The 20 MOA design tilts the rail upward, giving you more elevation adjustment range in your scope—useful for extended-range shooting where you need to dial up significant windage and elevation without maxing out your turrets.
SKU: 197556112 • Weight: 0.19oz
Availability: In Stock
The EGW Winchester 70 Short Action scope base delivers a rock-solid one-piece Picatinny rail solution for your Winchester 70, engineered to mount directly to factory receiver holes with zero drilling or tapping required. Built from precision-machined 6061 T6 aluminum, this 20 MOA base combines lightweight construction with tactical-grade rigidity—ideal for hunters and shooters who demand repeatable accuracy on their bolt-action platform without gunsmithing hassle.
The full-width Picatinny slots conform to MIL-STD 1913 specs (±.002"), so you have total freedom choosing Picatinny or Weaver rings and adjusting eye relief to suit your optic and shooting position. The milled center channel reduces weight where it counts, and the one-piece design eliminates the precision losses that come with split or two-ring bases. Whether you're building a long-range rig or a close-quarters hunting setup, this base gives you the flexibility to dial in exactly what works for your gun.
Installation is straightforward: the base uses socket head Torx screws (wrench included) and EGW recommends 20 inch-pounds of torque plus a drop of blue Loctite to keep everything locked in place. No guesswork, no surprises—just a purpose-built mount that respects your Winchester 70's legacy while modernizing its optics capability.
| Manufacturer | EGW |
| Platform | Winchester 70 Short Action |
| Design | One-Piece Picatinny Base |
| Material | 6061 T6 Extruded Aluminum |
| MOA Cant | 20 MOA |
| Rail Standard | MIL-STD 1913 (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| Installation | Direct-Fit to factory receiver holes; socket head Torx screws included |
| Torque Spec | 20 inch-pounds (blue Loctite recommended) |
Yes. The EGW base is engineered to mount directly to the factory scope mount holes on Winchester 70 short-action receivers. No gunsmithing required.
The base accepts both Picatinny and Weaver rings, giving you flexibility in ring choice while maintaining the precision slot spacing specified in MIL-STD 1913.
The mount includes socket head Torx screws and a wrench. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
The 20 MOA design tilts the rail upward, giving you more elevation adjustment range in your scope—useful for extended-range shooting where you need to dial up significant windage and elevation without maxing out your turrets.
SKU: 197556112 • Weight: 0.19oz