EGW197556276
Egw Weatherby Mark V (9-Lug Bolt) 0 Moa$62.99
Availability: In Stock
The EGW Weatherby Mark V (9-Lug Bolt) 20 MOA scope base brings serious versatility to one of the most reliable bolt-action platforms on the market. Built for shooters who demand a solid, no-nonsense mounting solution, this one-piece Picatinny rail installs directly to your Mark V receiver using the factory scope mount holes—no drilling, no tapping, no gunsmithing required. The 20 MOA inclination is built right in, giving long-range hunters and precision shooters a built-in elevation advantage that extends your effective shooting distance without burning through dial adjustments.
EGW machines these bases from ultra-rigid 7075 T6 extruded aluminum, the same material specs you'll find in precision-engineered firearms and aircraft components. The Picatinny slots are gauged to MIL-STD 1913 spec with tolerances of +/-.002 inches, meaning your rings will sit flat and true every time. Because the base is 0.100 inches lower than EGW's lightweight design, you get a lower bore axis for tighter groups and better cheek weld without sacrificing rigidity. The full-width cross-slots accept both Picatinny and Weaver rings, so you're not locked into one ring system—swap optics or rings as your hunting and range needs evolve.
Setup is straightforward: EGW includes socket head Torx screws and the wrench you'll need to install it. The company recommends 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked tight through seasons of recoil and field use. This is a working mount for working rifles, built to the standards that matter on the range and in the field.
| Brand | EGW |
| Product | Weatherby Mark V (9-Lug Bolt) Scope Base |
| Mount Type | One-piece Picatinny rail |
| MOA Inclination | 20 MOA |
| Material | 7075 T6 extruded aluminum |
| Picatinny Slot Standard | MIL-STD 1913 (+/-.002") |
| Compatible Ring Types | Picatinny or Weaver |
| Profile | 0.100" lower than lightweight mounts |
| Installation | Factory scope mount holes; no drilling required |
| Fasteners | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds with blue Loctite |
This base is designed specifically for the Weatherby Mark V with a 9-lug bolt and installs directly to the factory scope mount holes on your receiver. No modifications to the rifle are needed.
Yes. The one-piece Picatinny rail accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and allowing easy changes to eye relief.
The 20 MOA inclination is built into the base itself, angling the rail upward. This gives you extra elevation adjustment in your scope without relying on your elevation dial alone, extending your practical shooting distance, especially useful for long-range hunting and precision work.
The base comes with socket head Torx screws and a Torx wrench for installation. EGW recommends using 20 inch-pounds of torque and blue Loctite when assembling.
SKU: 197556227 • Weight: 0.22oz
Availability: In Stock
The EGW Weatherby Mark V (9-Lug Bolt) 20 MOA scope base brings serious versatility to one of the most reliable bolt-action platforms on the market. Built for shooters who demand a solid, no-nonsense mounting solution, this one-piece Picatinny rail installs directly to your Mark V receiver using the factory scope mount holes—no drilling, no tapping, no gunsmithing required. The 20 MOA inclination is built right in, giving long-range hunters and precision shooters a built-in elevation advantage that extends your effective shooting distance without burning through dial adjustments.
EGW machines these bases from ultra-rigid 7075 T6 extruded aluminum, the same material specs you'll find in precision-engineered firearms and aircraft components. The Picatinny slots are gauged to MIL-STD 1913 spec with tolerances of +/-.002 inches, meaning your rings will sit flat and true every time. Because the base is 0.100 inches lower than EGW's lightweight design, you get a lower bore axis for tighter groups and better cheek weld without sacrificing rigidity. The full-width cross-slots accept both Picatinny and Weaver rings, so you're not locked into one ring system—swap optics or rings as your hunting and range needs evolve.
Setup is straightforward: EGW includes socket head Torx screws and the wrench you'll need to install it. The company recommends 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked tight through seasons of recoil and field use. This is a working mount for working rifles, built to the standards that matter on the range and in the field.
| Brand | EGW |
| Product | Weatherby Mark V (9-Lug Bolt) Scope Base |
| Mount Type | One-piece Picatinny rail |
| MOA Inclination | 20 MOA |
| Material | 7075 T6 extruded aluminum |
| Picatinny Slot Standard | MIL-STD 1913 (+/-.002") |
| Compatible Ring Types | Picatinny or Weaver |
| Profile | 0.100" lower than lightweight mounts |
| Installation | Factory scope mount holes; no drilling required |
| Fasteners | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds with blue Loctite |
This base is designed specifically for the Weatherby Mark V with a 9-lug bolt and installs directly to the factory scope mount holes on your receiver. No modifications to the rifle are needed.
Yes. The one-piece Picatinny rail accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and allowing easy changes to eye relief.
The 20 MOA inclination is built into the base itself, angling the rail upward. This gives you extra elevation adjustment in your scope without relying on your elevation dial alone, extending your practical shooting distance, especially useful for long-range hunting and precision work.
The base comes with socket head Torx screws and a Torx wrench for installation. EGW recommends using 20 inch-pounds of torque and blue Loctite when assembling.
SKU: 197556227 • Weight: 0.22oz