$44.99
Availability: In Stock
The EGW Walther PPQ M2 Vortex Viper/Venom sight mount is a precision aluminum adapter designed to install compact red dot optics on your PPQ M2 slide. If you're looking to add a modern sight to one of Walther's most popular duty and competition pistols, this mount bridges the gap between your gun and optics like the Vortex Viper or Venom—letting you co-witness and shoot faster with a proven red dot platform.
Built from 7075 aluminum and finished in matte black hardcoat, the mount is rugged enough for duty carry and training abuse. At just 1.811 inches long and 0.99 inches wide, it keeps your sight line compact and doesn't add unnecessary bulk to the slide. The engineering includes a thoughtful detail: a hole drilled through the dovetail to work with the plunger mechanism on some PPQ models—or you can remove the plunger from the slide if you prefer a cleaner setup.
Installation comes with everything you need: two 6-32 button head screws, two 6-32 flat head screws, and a 6-32 set screw. The mount also supports Burris FastFire, Crimson Trace CTS-1200/CTS-1300, and Docter optics, making it flexible if you want to swap sights down the road. Just confirm your specific Walther model is in the compatibility list—the mount works across the PPQ M2 line, PPQ Classic, PPQ 45, PPS, and most other Walther duty pistols, but doesn't fit the PPQ 22, Q4 Tac, or Q5 Match.
Whether you're setting up a carry gun for faster target acquisition or building a range rig, this mount gives you a clean, dependable way to run optics on the Walther platform.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.811 inches |
| Overall Width | 0.99 inches |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Crimson Trace CTS-1200, Crimson Trace CTS-1300, Docter |
| Mounting Hardware | 2x 6-32 Button Head Screws, 2x 6-32 Flat Head Screws, 1x 6-32 Set Screw |
The EGW mount is designed for Walther PPQ M2 (all models), PPQ Classic, PPQ 45, PPQ 45 SD, PPQ Sub Compact, P99 (all models), PPX (all models), Creed, Creed 10 Round, PPS (all models), and PPS M2 (all models). It does not fit the PPQ 22, PPQ Q4 Tac, or Q5 Match. Check your specific model before ordering to ensure compatibility.
Yes. In addition to Vortex Viper and Venom, the mount is compatible with Burris FastFire, Crimson Trace CTS-1200, Crimson Trace CTS-1300, and Docter red dots. If you own one of these optics, this mount will work with your PPQ.
The mount ships with all necessary mounting hardware: two 6-32 button head screws, two 6-32 flat head screws, and one 6-32 set screw. You'll have everything needed to install the optic and secure the mount to your slide.
The hole is drilled to accommodate the plunger mechanism found on some Walther models. On models with this plunger, the hole allows the mount to install properly without interference. If your gun doesn't have a plunger or you want a simpler setup, the plunger can be removed from the slide entirely.
SKU: 197556170 • Weight: 0.1oz
Availability: In Stock
The EGW Walther PPQ M2 Vortex Viper/Venom sight mount is a precision aluminum adapter designed to install compact red dot optics on your PPQ M2 slide. If you're looking to add a modern sight to one of Walther's most popular duty and competition pistols, this mount bridges the gap between your gun and optics like the Vortex Viper or Venom—letting you co-witness and shoot faster with a proven red dot platform.
Built from 7075 aluminum and finished in matte black hardcoat, the mount is rugged enough for duty carry and training abuse. At just 1.811 inches long and 0.99 inches wide, it keeps your sight line compact and doesn't add unnecessary bulk to the slide. The engineering includes a thoughtful detail: a hole drilled through the dovetail to work with the plunger mechanism on some PPQ models—or you can remove the plunger from the slide if you prefer a cleaner setup.
Installation comes with everything you need: two 6-32 button head screws, two 6-32 flat head screws, and a 6-32 set screw. The mount also supports Burris FastFire, Crimson Trace CTS-1200/CTS-1300, and Docter optics, making it flexible if you want to swap sights down the road. Just confirm your specific Walther model is in the compatibility list—the mount works across the PPQ M2 line, PPQ Classic, PPQ 45, PPS, and most other Walther duty pistols, but doesn't fit the PPQ 22, Q4 Tac, or Q5 Match.
Whether you're setting up a carry gun for faster target acquisition or building a range rig, this mount gives you a clean, dependable way to run optics on the Walther platform.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.811 inches |
| Overall Width | 0.99 inches |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Crimson Trace CTS-1200, Crimson Trace CTS-1300, Docter |
| Mounting Hardware | 2x 6-32 Button Head Screws, 2x 6-32 Flat Head Screws, 1x 6-32 Set Screw |
The EGW mount is designed for Walther PPQ M2 (all models), PPQ Classic, PPQ 45, PPQ 45 SD, PPQ Sub Compact, P99 (all models), PPX (all models), Creed, Creed 10 Round, PPS (all models), and PPS M2 (all models). It does not fit the PPQ 22, PPQ Q4 Tac, or Q5 Match. Check your specific model before ordering to ensure compatibility.
Yes. In addition to Vortex Viper and Venom, the mount is compatible with Burris FastFire, Crimson Trace CTS-1200, Crimson Trace CTS-1300, and Docter red dots. If you own one of these optics, this mount will work with your PPQ.
The mount ships with all necessary mounting hardware: two 6-32 button head screws, two 6-32 flat head screws, and one 6-32 set screw. You'll have everything needed to install the optic and secure the mount to your slide.
The hole is drilled to accommodate the plunger mechanism found on some Walther models. On models with this plunger, the hole allows the mount to install properly without interference. If your gun doesn't have a plunger or you want a simpler setup, the plunger can be removed from the slide entirely.
SKU: 197556170 • Weight: 0.1oz