EGW197556286
Egw Fn Fns, Fnx Trijicon Rmr Sight Mount$44.99
Availability: In Stock
The EGW Sight Mount for DeltaPoint Pro is a dovetail-mounted adapter that lets you run a modern red-dot sight on FN, FNS, and FNX-platform pistols without permanent modifications. If you want to keep your rear sight intact for backup or quick swaps, this mount replaces the rear sight entirely, sitting flush in the existing dovetail cut. It's a practical solution for shooters who want to upgrade their defensive or duty gun to red-dot accuracy without committing to slide cuts.
The mount accepts the Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot optics. All mounting hardware is included, and the installation process is straightforward: remove your rear sight, install the EGW mount in the dovetail, and secure your red dot on top. Because the mount is removable, you can swap back to iron sights whenever you need to—whether that's for traditional carry, compliance, or a backup setup.
Installation is a simple assembly job. The included screws are torqued to 15 in/lbs with blue Loctite for a secure, non-permanent bond. A small piece of paper between the sight and mount makes future removal cleaner and keeps adhesive off your optic. This is a no-gunsmith solution that keeps your FN platform pistol flexible and ready to adapt.
| Brand | EGW |
| Platform Compatibility | FN, FNS, FNX pistols |
| Mounting Interface | Dovetail cut |
| Compatible Optics | Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, Optima |
| Torque Specification | 15 in/lbs |
| Loctite Type | Blue |
| Mounting Hardware | Included |
No. This mount is designed for FN, FNS, and FNX models. It will not fit FN FNP pistols (the slide radius is too large) or FN 5.7 models. It also does not fit any optics-ready pistols with factory slide cuts.
No—the mount replaces your rear sight in the dovetail. However, because the mount is removable, you can reinstall your original rear sight whenever you want. This makes it a flexible option if you ever need to revert to iron sights.
The EGW mount is compatible with the Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot sights.
No. The installation is straightforward: remove your rear sight from the dovetail, install the EGW mount in its place, and attach your red-dot sight with the included hardware torqued to 15 in/lbs using blue Loctite. All screws and hardware are included.
SKU: 197556289 • Weight: 0.1oz
Availability: In Stock
The EGW Sight Mount for DeltaPoint Pro is a dovetail-mounted adapter that lets you run a modern red-dot sight on FN, FNS, and FNX-platform pistols without permanent modifications. If you want to keep your rear sight intact for backup or quick swaps, this mount replaces the rear sight entirely, sitting flush in the existing dovetail cut. It's a practical solution for shooters who want to upgrade their defensive or duty gun to red-dot accuracy without committing to slide cuts.
The mount accepts the Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot optics. All mounting hardware is included, and the installation process is straightforward: remove your rear sight, install the EGW mount in the dovetail, and secure your red dot on top. Because the mount is removable, you can swap back to iron sights whenever you need to—whether that's for traditional carry, compliance, or a backup setup.
Installation is a simple assembly job. The included screws are torqued to 15 in/lbs with blue Loctite for a secure, non-permanent bond. A small piece of paper between the sight and mount makes future removal cleaner and keeps adhesive off your optic. This is a no-gunsmith solution that keeps your FN platform pistol flexible and ready to adapt.
| Brand | EGW |
| Platform Compatibility | FN, FNS, FNX pistols |
| Mounting Interface | Dovetail cut |
| Compatible Optics | Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, Optima |
| Torque Specification | 15 in/lbs |
| Loctite Type | Blue |
| Mounting Hardware | Included |
No. This mount is designed for FN, FNS, and FNX models. It will not fit FN FNP pistols (the slide radius is too large) or FN 5.7 models. It also does not fit any optics-ready pistols with factory slide cuts.
No—the mount replaces your rear sight in the dovetail. However, because the mount is removable, you can reinstall your original rear sight whenever you want. This makes it a flexible option if you ever need to revert to iron sights.
The EGW mount is compatible with the Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot sights.
No. The installation is straightforward: remove your rear sight from the dovetail, install the EGW mount in its place, and attach your red-dot sight with the included hardware torqued to 15 in/lbs using blue Loctite. All screws and hardware are included.
SKU: 197556289 • Weight: 0.1oz
