EGW197556348
Egw S&W M&P 22 Compact Trijicon Rmr Sight Mount$44.99
Availability: In Stock
The EGW S&W M&P Trijicon RMR sight mount is a precision aluminum mounting solution that lets you pair your M&P pistol with a Trijicon RMR red dot sight without permanent modifications to your slide. Instead of cutting or welding, this mount simply replaces your factory rear sight in the existing dovetail—meaning you can swap it out anytime and return to iron sights if needed. It's built from 7075 aluminum with a matte black hardcoat finish, the same material standard in quality tactical hardware, and arrives ready to install with all necessary mounting hardware included.
The mount is engineered to work with S&W M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE, and SD40VE models. EGW specs their tolerances to OEM standards, though S&W dovetail dimensions can vary slightly from gun to gun, so a gunsmith's hand at installation is recommended. Once seated, your RMR mounts solidly to the top rail via the included 6-32 screws and set screw, torqued to 15 inch-pounds with blue Loctite to ensure zero shift during hard use.
This is a straightforward slide-mounted RMR platform for shooters who want a co-witnessed or non-co-witnessed optic setup without the cost and permanence of milling. Whether you're building a carry gun, a competition rig, or a duty pistol, the EGW mount gives you that direct-to-slide sight picture in minutes—no gunsmithing knowledge required, though professional installation is always the safer choice.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780 inches |
| Overall Width | 1.1 inches |
| Red Dot Compatibility | Trijicon RMR |
| Mounting Hardware | 2x 6-32 Flat Head Screws, 1x 6-32 x 3/16 Set Screw |
No. The EGW mount is too wide to fit the M&P Shield, M&P Shield EZ .380, or the M&P C.O.R.E Series. It is designed for full-size and compact M&P models, the SD9VE, SD40VE, M&P 22 variants, and the original M&P 2.0 line.
No. This mount replaces your factory rear sight directly in the existing dovetail without any slide modification. Simply remove your rear sight and install the EGW mount in its place. A rear sight pusher tool is highly recommended for safe removal of the factory sight.
The mount includes all necessary mounting hardware: two 6-32 flat head screws and one 6-32 x 3/16 set screw. You'll need blue Loctite (not included) and a torque wrench to finish the RMR installation properly.
Yes. The mount is fully reversible. Remove the RMR and the EGW mount, and reinstall your original rear sight in the dovetail anytime.
SKU: 197556354 • Weight: 0.07oz
Availability: In Stock
The EGW S&W M&P Trijicon RMR sight mount is a precision aluminum mounting solution that lets you pair your M&P pistol with a Trijicon RMR red dot sight without permanent modifications to your slide. Instead of cutting or welding, this mount simply replaces your factory rear sight in the existing dovetail—meaning you can swap it out anytime and return to iron sights if needed. It's built from 7075 aluminum with a matte black hardcoat finish, the same material standard in quality tactical hardware, and arrives ready to install with all necessary mounting hardware included.
The mount is engineered to work with S&W M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE, and SD40VE models. EGW specs their tolerances to OEM standards, though S&W dovetail dimensions can vary slightly from gun to gun, so a gunsmith's hand at installation is recommended. Once seated, your RMR mounts solidly to the top rail via the included 6-32 screws and set screw, torqued to 15 inch-pounds with blue Loctite to ensure zero shift during hard use.
This is a straightforward slide-mounted RMR platform for shooters who want a co-witnessed or non-co-witnessed optic setup without the cost and permanence of milling. Whether you're building a carry gun, a competition rig, or a duty pistol, the EGW mount gives you that direct-to-slide sight picture in minutes—no gunsmithing knowledge required, though professional installation is always the safer choice.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780 inches |
| Overall Width | 1.1 inches |
| Red Dot Compatibility | Trijicon RMR |
| Mounting Hardware | 2x 6-32 Flat Head Screws, 1x 6-32 x 3/16 Set Screw |
No. The EGW mount is too wide to fit the M&P Shield, M&P Shield EZ .380, or the M&P C.O.R.E Series. It is designed for full-size and compact M&P models, the SD9VE, SD40VE, M&P 22 variants, and the original M&P 2.0 line.
No. This mount replaces your factory rear sight directly in the existing dovetail without any slide modification. Simply remove your rear sight and install the EGW mount in its place. A rear sight pusher tool is highly recommended for safe removal of the factory sight.
The mount includes all necessary mounting hardware: two 6-32 flat head screws and one 6-32 x 3/16 set screw. You'll need blue Loctite (not included) and a torque wrench to finish the RMR installation properly.
Yes. The mount is fully reversible. Remove the RMR and the EGW mount, and reinstall your original rear sight in the dovetail anytime.
SKU: 197556354 • Weight: 0.07oz