EGW197556372
Egw Ruger~ No.1 0 Moa$62.99
Availability: In Stock
The EGW Ruger No. 1 Varmint 0 MOA scope base is a one-piece Picatinny rail system designed specifically for Ruger No. 1 rifles. If you're running a scoped varmint rig, this mount gives you the ability to upgrade or adjust your optic setup without any gunsmithing—no drilling, no tapping required. It uses your rifle's existing factory scope mount holes for a straightforward installation that respects your gun's original design.
Built from extruded 6061 T6 aluminum and machined to tight tolerances, this tactical-profile mount is rigid enough to hold zero through repeated shooting sessions. The one-piece design eliminates the shifting and flex that can come with two-piece bases, which matters when you're dialing in shots at distance or chasing prairie dogs across a flat. The integrated Picatinny rail accepts both Picatinny and Weaver rings, so you're not locked into one ring manufacturer and can dial in eye relief exactly where you need it. The full-width cross-slots are gauged to MIL-STD 1913 specs, maintaining the precision fit that keeps your scope stable.
Weight matters if you're carrying your rifle all day, and EGW kept that in mind—a milled center channel through the base reduces heft without compromising strength. Installation is straightforward: the package includes socket head Torx screws and the wrench you'll need. EGW recommends 20 inch-pounds of torque and a drop of blue threadlocker for a permanent, secure fit that won't loosen under recoil.
| Manufacturer | EGW (EuroOptic) |
| Product Type | One-Piece Picatinny Scope Base |
| Fits | Ruger No. 1 Varmint |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Accepts | Picatinny and Weaver scope rings |
| Material | 6061 T6 Aluminum, extruded and machined |
| MOA Configuration | 0 MOA |
| Torque Specification | 20 inch-pounds (with blue threadlocker recommended) |
| Slot Tolerance | +/-.002" per MIL-STD 1913 |
| Included Hardware | Socket head Torx screws and wrench |
Yes. The EGW Ruger No. 1 Varmint base is designed to use your rifle's existing factory scope mount holes—no drilling or tapping required for installation.
The Picatinny rail accepts both Picatinny-spec and Weaver-compatible scope rings, giving you flexibility in ring choice and allowing you to dial in the eye relief that works best for your optic and shooting position.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends torquing the mounting screws to 20 inch-pounds and applying a drop of blue threadlocker to ensure the base stays secure under recoil.
This is a one-piece Picatinny rail base, which provides a more rigid platform than split two-piece bases and eliminates potential shifting between front and rear sections.
SKU: 197556307 • Weight: 0.22oz
Availability: In Stock
The EGW Ruger No. 1 Varmint 0 MOA scope base is a one-piece Picatinny rail system designed specifically for Ruger No. 1 rifles. If you're running a scoped varmint rig, this mount gives you the ability to upgrade or adjust your optic setup without any gunsmithing—no drilling, no tapping required. It uses your rifle's existing factory scope mount holes for a straightforward installation that respects your gun's original design.
Built from extruded 6061 T6 aluminum and machined to tight tolerances, this tactical-profile mount is rigid enough to hold zero through repeated shooting sessions. The one-piece design eliminates the shifting and flex that can come with two-piece bases, which matters when you're dialing in shots at distance or chasing prairie dogs across a flat. The integrated Picatinny rail accepts both Picatinny and Weaver rings, so you're not locked into one ring manufacturer and can dial in eye relief exactly where you need it. The full-width cross-slots are gauged to MIL-STD 1913 specs, maintaining the precision fit that keeps your scope stable.
Weight matters if you're carrying your rifle all day, and EGW kept that in mind—a milled center channel through the base reduces heft without compromising strength. Installation is straightforward: the package includes socket head Torx screws and the wrench you'll need. EGW recommends 20 inch-pounds of torque and a drop of blue threadlocker for a permanent, secure fit that won't loosen under recoil.
| Manufacturer | EGW (EuroOptic) |
| Product Type | One-Piece Picatinny Scope Base |
| Fits | Ruger No. 1 Varmint |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Accepts | Picatinny and Weaver scope rings |
| Material | 6061 T6 Aluminum, extruded and machined |
| MOA Configuration | 0 MOA |
| Torque Specification | 20 inch-pounds (with blue threadlocker recommended) |
| Slot Tolerance | +/-.002" per MIL-STD 1913 |
| Included Hardware | Socket head Torx screws and wrench |
Yes. The EGW Ruger No. 1 Varmint base is designed to use your rifle's existing factory scope mount holes—no drilling or tapping required for installation.
The Picatinny rail accepts both Picatinny-spec and Weaver-compatible scope rings, giving you flexibility in ring choice and allowing you to dial in the eye relief that works best for your optic and shooting position.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends torquing the mounting screws to 20 inch-pounds and applying a drop of blue threadlocker to ensure the base stays secure under recoil.
This is a one-piece Picatinny rail base, which provides a more rigid platform than split two-piece bases and eliminates potential shifting between front and rear sections.
SKU: 197556307 • Weight: 0.22oz