EGW197556194
Egw Ruger 10/22 Takedown 0 Moa Black$26.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Ruger 10/22 Takedown scope base gives you a one-piece Picatinny rail system that installs without drilling or tapping your receiver. Built for shooters who want to add optics to their 10/22 Takedown without permanent modifications, this mount uses the factory scope holes already on your gun—bolt it down and you're ready to mount rings and glass. Whether you're setting up a backyard plinker, a small-game rifle, or a precision rimfire for target work, this base lets you dial in eye relief exactly where you need it and swap scopes or rings in seconds.
The mount is precision-machined from 6061-T6 aluminum extrusion and engineered to tight tolerances—Picatinny slots are gauged to military spec (MIL-STD 1913) to within ±.002". It accepts either Picatinny or Weaver scope rings, so you're not locked into one ring brand or style. The milled center channel reduces weight without sacrificing rigidity, a smart design choice if you care about keeping your 10/22 handling light and nimble. Everything you need is in the box: socket head Torx screws and the wrench to drive them. EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite to ensure the mount stays put through years of shooting.
If you've got a Ruger 10/22 Takedown and you're tired of iron sights or ready to upgrade optics, this base is a no-fuss way to modernize your rifle without permanent gunsmithing. Fast setup, solid construction, and genuine versatility in scope choice make it a no-brainer for any serious rimfire shooter.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Mount |
| Firearm Fit | Ruger 10/22 Takedown |
| Material | 6061-T6 Extruded Aluminum |
| Rail Standard | Picatinny / MIL-STD 1913 |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Installation | Direct to factory scope mount holes—no drilling or tapping |
| Torque Specification | 20 inch-pounds |
| Finish | Silver |
| MOA | 0 MOA |
Yes. The EGW Ruger 10/22 Takedown base is drilled to fit the factory scope mount holes on the 10/22 Takedown receiver. No drilling or tapping is needed—it bolts straight on using the existing holes.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility to choose rings from most major optics manufacturers. This also lets you swap rings or scopes quickly by sliding them along the rail.
EGW recommends 20 inch-pounds of torque. The mount includes socket head Torx screws and a wrench, and EGW suggests applying a drop of blue Loctite to the screws to keep everything secure.
Yes. The Picatinny rail design allows you to reposition your scope rings along the rail for fast and simple eye relief adjustments, so you can dial in the exact sight picture that works for your shooting style.
SKU: 197556392 • Weight: 0.14oz
Availability: In Stock
The EGW Ruger 10/22 Takedown scope base gives you a one-piece Picatinny rail system that installs without drilling or tapping your receiver. Built for shooters who want to add optics to their 10/22 Takedown without permanent modifications, this mount uses the factory scope holes already on your gun—bolt it down and you're ready to mount rings and glass. Whether you're setting up a backyard plinker, a small-game rifle, or a precision rimfire for target work, this base lets you dial in eye relief exactly where you need it and swap scopes or rings in seconds.
The mount is precision-machined from 6061-T6 aluminum extrusion and engineered to tight tolerances—Picatinny slots are gauged to military spec (MIL-STD 1913) to within ±.002". It accepts either Picatinny or Weaver scope rings, so you're not locked into one ring brand or style. The milled center channel reduces weight without sacrificing rigidity, a smart design choice if you care about keeping your 10/22 handling light and nimble. Everything you need is in the box: socket head Torx screws and the wrench to drive them. EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite to ensure the mount stays put through years of shooting.
If you've got a Ruger 10/22 Takedown and you're tired of iron sights or ready to upgrade optics, this base is a no-fuss way to modernize your rifle without permanent gunsmithing. Fast setup, solid construction, and genuine versatility in scope choice make it a no-brainer for any serious rimfire shooter.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Mount |
| Firearm Fit | Ruger 10/22 Takedown |
| Material | 6061-T6 Extruded Aluminum |
| Rail Standard | Picatinny / MIL-STD 1913 |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Installation | Direct to factory scope mount holes—no drilling or tapping |
| Torque Specification | 20 inch-pounds |
| Finish | Silver |
| MOA | 0 MOA |
Yes. The EGW Ruger 10/22 Takedown base is drilled to fit the factory scope mount holes on the 10/22 Takedown receiver. No drilling or tapping is needed—it bolts straight on using the existing holes.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility to choose rings from most major optics manufacturers. This also lets you swap rings or scopes quickly by sliding them along the rail.
EGW recommends 20 inch-pounds of torque. The mount includes socket head Torx screws and a wrench, and EGW suggests applying a drop of blue Loctite to the screws to keep everything secure.
Yes. The Picatinny rail design allows you to reposition your scope rings along the rail for fast and simple eye relief adjustments, so you can dial in the exact sight picture that works for your shooting style.
SKU: 197556392 • Weight: 0.14oz