EGW197556364
Egw Remington 597 0 Moa$35.99
Availability: In Stock
The EGW Remington 710/770 0 MOA scope base is a one-piece Picatinny rail that mounts directly to your Remington 710 or 770 receiver using the factory scope mount holes—no drilling or tapping required. Built from precision-machined 6061 T6 aluminum, this lightweight tactical mount gives you genuine flexibility in optic choice and eye relief adjustment without the permanent modifications that turn many hunters away from aftermarket bases.
The full-width Picatinny slots are gauged to military spec (MIL-STD 1913, +/-.002"), so it accepts both Picatinny and Weaver scope rings. The milled center channel reduces weight without sacrificing rigidity, and the 0 MOA configuration works for hunters and shooters who prefer naturally higher-mounted optics or who plan to dial for elevation rather than relying on base canting. If you want to swap scopes, dial in a completely different magnification, or shift eye relief on the fly, this base gives you that freedom without permanent alterations.
Installation is straightforward: the base uses included socket head Torx screws (wrench provided) and torques to 20 inch-pounds with a drop of blue Loctite. It's a solid, no-nonsense upgrade for anyone running a 710 or 770 who wants a modern Picatinny platform instead of being locked into factory rings.
| Manufacturer | EGW |
| Fits | Remington 710, 770 |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061 T6 Aluminum |
| MOA | 0 |
| Ring Compatibility | Picatinny or Weaver |
| Design | One-piece, milled center channel |
| Installation | Factory receiver holes (no drilling/tapping) |
| Recommended Torque | 20 inch-pounds |
| Hardware | Socket head Torx screws and wrench included |
Yes. The EGW base mounts directly to the factory scope mount holes on the receiver, so no drilling or tapping is needed. It's a drop-in solution for 710 and 770 owners.
Yes. The Picatinny slots accept both Picatinny and Weaver scope rings, giving you options when choosing or swapping optics.
0 MOA means the base has no built-in angle; your scope sits in its natural, highest position on the receiver. This works well for hunters who prefer a naturally higher cheek weld or who plan to dial elevation rather than canting the base for drop compensation.
The base comes with socket head Torx screws for installation and a Torx wrench. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556183 • Weight: 0.15oz
Availability: In Stock
The EGW Remington 710/770 0 MOA scope base is a one-piece Picatinny rail that mounts directly to your Remington 710 or 770 receiver using the factory scope mount holes—no drilling or tapping required. Built from precision-machined 6061 T6 aluminum, this lightweight tactical mount gives you genuine flexibility in optic choice and eye relief adjustment without the permanent modifications that turn many hunters away from aftermarket bases.
The full-width Picatinny slots are gauged to military spec (MIL-STD 1913, +/-.002"), so it accepts both Picatinny and Weaver scope rings. The milled center channel reduces weight without sacrificing rigidity, and the 0 MOA configuration works for hunters and shooters who prefer naturally higher-mounted optics or who plan to dial for elevation rather than relying on base canting. If you want to swap scopes, dial in a completely different magnification, or shift eye relief on the fly, this base gives you that freedom without permanent alterations.
Installation is straightforward: the base uses included socket head Torx screws (wrench provided) and torques to 20 inch-pounds with a drop of blue Loctite. It's a solid, no-nonsense upgrade for anyone running a 710 or 770 who wants a modern Picatinny platform instead of being locked into factory rings.
| Manufacturer | EGW |
| Fits | Remington 710, 770 |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061 T6 Aluminum |
| MOA | 0 |
| Ring Compatibility | Picatinny or Weaver |
| Design | One-piece, milled center channel |
| Installation | Factory receiver holes (no drilling/tapping) |
| Recommended Torque | 20 inch-pounds |
| Hardware | Socket head Torx screws and wrench included |
Yes. The EGW base mounts directly to the factory scope mount holes on the receiver, so no drilling or tapping is needed. It's a drop-in solution for 710 and 770 owners.
Yes. The Picatinny slots accept both Picatinny and Weaver scope rings, giving you options when choosing or swapping optics.
0 MOA means the base has no built-in angle; your scope sits in its natural, highest position on the receiver. This works well for hunters who prefer a naturally higher cheek weld or who plan to dial elevation rather than canting the base for drop compensation.
The base comes with socket head Torx screws for installation and a Torx wrench. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556183 • Weight: 0.15oz