EGW197556364
Egw Remington 597 0 Moa$35.99
Availability: In Stock
The EGW Remington 597 scope base gives you a modern one-piece Picatinny rail system for your Remington 597 without any gunsmithing. Drop it in using the factory scope mount holes—no drilling, no tapping—and you're ready to mount optics. Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specifications, this mount accepts both Picatinny and Weaver rings, so you have flexibility in choosing your optic or making changes down the road.
The cross-slots are gauged to +/-.002" tolerances, giving you the repeatability and rigidity you need for consistent shooting. The lightweight tactical profile includes a milled center channel to shave weight without sacrificing strength. Whether you're setting up a hunting rifle, a target gun, or a plinker, this base lets you dial in eye relief quickly and move between scope choices without removing the mount from the gun.
Installation is straightforward: use the included socket head Torx screws, tighten to 20 inch-pounds of torque, and apply a light dab of blue loctite. EGW includes the wrench you need to install it. The result is a solid, no-nonsense foundation for your optic setup.
| Brand | EGW |
| Firearm | Remington 597 |
| Mount Type | One-piece Picatinny rail base |
| Material | 6061 T6 extruded aluminum |
| Ring Compatibility | Picatinny and Weaver |
| Slot Tolerance | ±.002" to MIL-STD 1913 |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket head Torx screws, wrench, loctite recommended |
Yes. The base is drilled to match the factory scope mount holes on the Remington 597 receiver, so installation requires no drilling or tapping—just screws, torque, and loctite.
This base accepts both Picatinny and Weaver rings, giving you broad compatibility with most modern scope rings and optics on the market.
The mount includes socket head Torx screws and a wrench for installation. EGW recommends applying blue loctite to the screws and torqueing to 20 inch-pounds.
A one-piece rail system is more rigid, easier to adjust eye relief, and lets you swap optics or rings without removing the base from your rifle—making it faster to change your setup for different shooting scenarios.
SKU: 197556200 • Weight: 0.2oz
Availability: In Stock
The EGW Remington 597 scope base gives you a modern one-piece Picatinny rail system for your Remington 597 without any gunsmithing. Drop it in using the factory scope mount holes—no drilling, no tapping—and you're ready to mount optics. Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specifications, this mount accepts both Picatinny and Weaver rings, so you have flexibility in choosing your optic or making changes down the road.
The cross-slots are gauged to +/-.002" tolerances, giving you the repeatability and rigidity you need for consistent shooting. The lightweight tactical profile includes a milled center channel to shave weight without sacrificing strength. Whether you're setting up a hunting rifle, a target gun, or a plinker, this base lets you dial in eye relief quickly and move between scope choices without removing the mount from the gun.
Installation is straightforward: use the included socket head Torx screws, tighten to 20 inch-pounds of torque, and apply a light dab of blue loctite. EGW includes the wrench you need to install it. The result is a solid, no-nonsense foundation for your optic setup.
| Brand | EGW |
| Firearm | Remington 597 |
| Mount Type | One-piece Picatinny rail base |
| Material | 6061 T6 extruded aluminum |
| Ring Compatibility | Picatinny and Weaver |
| Slot Tolerance | ±.002" to MIL-STD 1913 |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket head Torx screws, wrench, loctite recommended |
Yes. The base is drilled to match the factory scope mount holes on the Remington 597 receiver, so installation requires no drilling or tapping—just screws, torque, and loctite.
This base accepts both Picatinny and Weaver rings, giving you broad compatibility with most modern scope rings and optics on the market.
The mount includes socket head Torx screws and a wrench for installation. EGW recommends applying blue loctite to the screws and torqueing to 20 inch-pounds.
A one-piece rail system is more rigid, easier to adjust eye relief, and lets you swap optics or rings without removing the base from your rifle—making it faster to change your setup for different shooting scenarios.
SKU: 197556200 • Weight: 0.2oz