EGW197556075
Egw Rem 700, 722, 40X Short Action 20 Moa$35.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Rem 700, 722, 40X Short Action 30 MOA scope base gives you a modern Picatinny rail system for classic Remington action rifles without the gunsmith work. If you're running a Rem 700, 722, or 40X short action and want the flexibility to swap scopes, dial in precise eye relief, or upgrade your glass without drilling and tapping your receiver, this one-piece base solves that problem. It bolts directly to your factory scope mount holes and accepts any standard Picatinny or Weaver rings, so you're not locked into a single optic choice.
Built from 7075 T6 extruded aluminum, the base is precision-machined with Picatinny slot spacing that meets MIL-STD 1913 tolerances—accurate to +/-.002"—so your rings sit tight and level. The 30 MOA cant is baked in, making this base popular with long-range shooters who want to maximize elevation adjustment for extended-distance work. The heavy-duty profile sits .100" lower than lighter variants, which keeps your scope closer to the barrel for a better cheek weld and a cleaner sight picture without adding unnecessary height.
Installation is straightforward: the base uses your existing receiver holes and comes with socket head Torx screws and the wrench you'll need. EGW recommends 20 inch-pounds of torque and a thin coat of blue Loctite to keep everything locked down through recoil. Whether you're building a precision rifle, upgrading a hunting gun, or swapping between setups, this base gives you the rail system and versatility that integral bases can't match.
| Brand | EGW |
| Fits | Remington 700, 722, 40X (short action) |
| MOA Cant | 30 MOA |
| Rail Type | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 7075 T6 extruded aluminum |
| Slot Tolerance | +/-.002" |
| Profile | Heavy Duty |
| Hardware | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
Yes. The EGW base is drilled to match the factory scope mount holes on Remington 700, 722, and 40X short action receivers. Bolt it directly to your existing holes—no drilling or tapping required.
Any rings designed for Picatinny or Weaver rails will work. This gives you flexibility to choose the ring height, material, and brand that fits your setup and optic choice.
The 30 MOA elevation cant is built for long-range shooting. It lets you maximize the vertical adjustment range of your scope for extended-distance hunting or precision rifle work, so you're not burning up internal turret travel at distance.
The base ships with socket head Torx screws and a wrench. EGW recommends torquing to 20 inch-pounds and applying a thin coat of blue Loctite to keep the fasteners secure.
SKU: 197556316 • Weight: 0.2oz
Availability: In Stock
The EGW Rem 700, 722, 40X Short Action 30 MOA scope base gives you a modern Picatinny rail system for classic Remington action rifles without the gunsmith work. If you're running a Rem 700, 722, or 40X short action and want the flexibility to swap scopes, dial in precise eye relief, or upgrade your glass without drilling and tapping your receiver, this one-piece base solves that problem. It bolts directly to your factory scope mount holes and accepts any standard Picatinny or Weaver rings, so you're not locked into a single optic choice.
Built from 7075 T6 extruded aluminum, the base is precision-machined with Picatinny slot spacing that meets MIL-STD 1913 tolerances—accurate to +/-.002"—so your rings sit tight and level. The 30 MOA cant is baked in, making this base popular with long-range shooters who want to maximize elevation adjustment for extended-distance work. The heavy-duty profile sits .100" lower than lighter variants, which keeps your scope closer to the barrel for a better cheek weld and a cleaner sight picture without adding unnecessary height.
Installation is straightforward: the base uses your existing receiver holes and comes with socket head Torx screws and the wrench you'll need. EGW recommends 20 inch-pounds of torque and a thin coat of blue Loctite to keep everything locked down through recoil. Whether you're building a precision rifle, upgrading a hunting gun, or swapping between setups, this base gives you the rail system and versatility that integral bases can't match.
| Brand | EGW |
| Fits | Remington 700, 722, 40X (short action) |
| MOA Cant | 30 MOA |
| Rail Type | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 7075 T6 extruded aluminum |
| Slot Tolerance | +/-.002" |
| Profile | Heavy Duty |
| Hardware | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
Yes. The EGW base is drilled to match the factory scope mount holes on Remington 700, 722, and 40X short action receivers. Bolt it directly to your existing holes—no drilling or tapping required.
Any rings designed for Picatinny or Weaver rails will work. This gives you flexibility to choose the ring height, material, and brand that fits your setup and optic choice.
The 30 MOA elevation cant is built for long-range shooting. It lets you maximize the vertical adjustment range of your scope for extended-distance hunting or precision rifle work, so you're not burning up internal turret travel at distance.
The base ships with socket head Torx screws and a wrench. EGW recommends torquing to 20 inch-pounds and applying a thin coat of blue Loctite to keep the fasteners secure.
SKU: 197556316 • Weight: 0.2oz