EGW197556211
Egw Rem 700, 722, 40X Short Action 0 Moa$35.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Rem 700, 722, 40X Long Action 0 MOA scope base is a one-piece Picatinny rail built for Remington 700, 722, and 40X long-action rifles. If you want to add a modern optic mounting system without reaching for a drill press, this direct-fit base uses your rifle's factory receiver holes—no drilling, no tapping. It's the straightforward way to go from iron sights or an older mount to contemporary Picatinny or Weaver rings, and it gives you the freedom to dial in eye relief exactly where you need it.
Machined from 7075 T6 aluminum, this is heavy-duty hardware built to stay put. The cross-slots meet MIL-STD 1913 specifications (±.002"), so ring fit is consistently tight. At 0 MOA, the base sits level with no cant, keeping your zero honest and your shooting geometry clean. The design positions your scope closer to the bore axis than lighter alternatives, which can help with sight picture and ballistic consistency, especially at distance.
Setup is dead simple: drop it on, snug it down with the included socket-head Torx screws using the supplied wrench, add a dab of blue Loctite, and torque to 20 inch-pounds. Whether you're mounting a hunting scope, a precision .308 glass, or swapping between rings for different jobs, the Picatinny standard gives you flexibility without the headache. Built for hunters and shooters who want reliability without fuss.
| Firearm Compatibility | Remington 700, 722, 40X (Long Action) |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| MOA | 0 MOA |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Fasteners | Socket-head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
No. This base is machined specifically for Remington 700, 722, and 40X long-action receivers. Short-action rifles require a different mounting pattern.
Yes. The base is MIL-STD 1913 Picatinny-compliant and will accept any standard Picatinny or Weaver scope ring. This gives you flexibility in ring height, style, and ring choice.
No. The base is drilled to match your factory scope mount holes on the receiver. Installation requires only the fasteners and wrench included with the base.
0 MOA means the base mounts level, with no upward or downward angle. Your scope sits true to the bore axis, simplifying zero and ballistic calculations.
SKU: 197556092 • Weight: 0.2oz
Availability: In Stock
The EGW Rem 700, 722, 40X Long Action 0 MOA scope base is a one-piece Picatinny rail built for Remington 700, 722, and 40X long-action rifles. If you want to add a modern optic mounting system without reaching for a drill press, this direct-fit base uses your rifle's factory receiver holes—no drilling, no tapping. It's the straightforward way to go from iron sights or an older mount to contemporary Picatinny or Weaver rings, and it gives you the freedom to dial in eye relief exactly where you need it.
Machined from 7075 T6 aluminum, this is heavy-duty hardware built to stay put. The cross-slots meet MIL-STD 1913 specifications (±.002"), so ring fit is consistently tight. At 0 MOA, the base sits level with no cant, keeping your zero honest and your shooting geometry clean. The design positions your scope closer to the bore axis than lighter alternatives, which can help with sight picture and ballistic consistency, especially at distance.
Setup is dead simple: drop it on, snug it down with the included socket-head Torx screws using the supplied wrench, add a dab of blue Loctite, and torque to 20 inch-pounds. Whether you're mounting a hunting scope, a precision .308 glass, or swapping between rings for different jobs, the Picatinny standard gives you flexibility without the headache. Built for hunters and shooters who want reliability without fuss.
| Firearm Compatibility | Remington 700, 722, 40X (Long Action) |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| MOA | 0 MOA |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Fasteners | Socket-head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
No. This base is machined specifically for Remington 700, 722, and 40X long-action receivers. Short-action rifles require a different mounting pattern.
Yes. The base is MIL-STD 1913 Picatinny-compliant and will accept any standard Picatinny or Weaver scope ring. This gives you flexibility in ring height, style, and ring choice.
No. The base is drilled to match your factory scope mount holes on the receiver. Installation requires only the fasteners and wrench included with the base.
0 MOA means the base mounts level, with no upward or downward angle. Your scope sits true to the bore axis, simplifying zero and ballistic calculations.
SKU: 197556092 • Weight: 0.2oz