EGW194196353
Egw Rem 700, 721, 725 Long Action 20 Moa Steel$107.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The EGW Remington 700, 721, 725 Long Action 20 MOA scope base gives you a solid, one-piece mounting solution for precision rifles without the hassle of drilling and tapping. Built from 6061 T6 aluminum and machined to tight tolerances, this picatinny rail integrates directly into your rifle's factory scope mount holes. The 20 MOA inclination is purpose-built for long-range shooting, giving you extra elevation travel without relying solely on your scope's turrets—a setup favored by distance shooters who want room to dial without running out of adjustment.
The full-width picatinny slots follow MIL-STD 1913 specs (±.002"), so you can mount any standard picatinny or weaver scope rings and adjust eye relief quickly as needed. The aluminum construction keeps weight minimal, and EGW even mills a center channel through tactical versions for further weight savings. Every base ships with socket head torx screws and a wrench—no hunting for hardware. EGW specs 20 inch-lbs of torque and a drop of blue loctite for the install, keeping things simple and repeatable.
If you're running a Remington 700, 721, or 725 long action and want a precision picatinny platform that's rigid, compatible with standard rings, and ready to shoot, this one-piece base eliminates guesswork. It's the kind of straightforward, well-engineered mount that lets you focus on the gun and the shot—not fussing with the hardware.
| Brand | EGW |
| Fits | Remington 700, 721, 725 Long Action |
| Mount Type | One-piece picatinny scope base |
| Inclination | 20 MOA |
| Rail Standard | MIL-STD 1913 picatinny |
| Slot Tolerance | ±.002" |
| Material | 6061 T6 aluminum |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Recommended Torque | 20 inch-lbs with blue loctite |
| Includes | Socket head torx screws and torx wrench |
This base is engineered for Remington 700, 721, and 725 long action rifles. It mounts directly to your rifle's factory scope mount holes—no drilling or tapping needed.
The 20 MOA built-in angle adds extra elevation adjustment range, letting you dial farther out without maxing out your scope's turrets. This is especially valuable for long-range hunting and precision rifle shooting where you need room to dial for distance.
Yes. The picatinny rail accepts any standard picatinny or weaver rings, giving you flexibility in ring choice and eye relief adjustment.
Each base includes socket head torx screws, a torx wrench for installation, and EGW recommends using blue loctite and 20 inch-lbs of torque when mounting.
SKU: 197556292 • Weight: 0.15oz
Availability: In Stock
Current Stock: Out of stock
The EGW Remington 700, 721, 725 Long Action 20 MOA scope base gives you a solid, one-piece mounting solution for precision rifles without the hassle of drilling and tapping. Built from 6061 T6 aluminum and machined to tight tolerances, this picatinny rail integrates directly into your rifle's factory scope mount holes. The 20 MOA inclination is purpose-built for long-range shooting, giving you extra elevation travel without relying solely on your scope's turrets—a setup favored by distance shooters who want room to dial without running out of adjustment.
The full-width picatinny slots follow MIL-STD 1913 specs (±.002"), so you can mount any standard picatinny or weaver scope rings and adjust eye relief quickly as needed. The aluminum construction keeps weight minimal, and EGW even mills a center channel through tactical versions for further weight savings. Every base ships with socket head torx screws and a wrench—no hunting for hardware. EGW specs 20 inch-lbs of torque and a drop of blue loctite for the install, keeping things simple and repeatable.
If you're running a Remington 700, 721, or 725 long action and want a precision picatinny platform that's rigid, compatible with standard rings, and ready to shoot, this one-piece base eliminates guesswork. It's the kind of straightforward, well-engineered mount that lets you focus on the gun and the shot—not fussing with the hardware.
| Brand | EGW |
| Fits | Remington 700, 721, 725 Long Action |
| Mount Type | One-piece picatinny scope base |
| Inclination | 20 MOA |
| Rail Standard | MIL-STD 1913 picatinny |
| Slot Tolerance | ±.002" |
| Material | 6061 T6 aluminum |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Recommended Torque | 20 inch-lbs with blue loctite |
| Includes | Socket head torx screws and torx wrench |
This base is engineered for Remington 700, 721, and 725 long action rifles. It mounts directly to your rifle's factory scope mount holes—no drilling or tapping needed.
The 20 MOA built-in angle adds extra elevation adjustment range, letting you dial farther out without maxing out your scope's turrets. This is especially valuable for long-range hunting and precision rifle shooting where you need room to dial for distance.
Yes. The picatinny rail accepts any standard picatinny or weaver rings, giving you flexibility in ring choice and eye relief adjustment.
Each base includes socket head torx screws, a torx wrench for installation, and EGW recommends using blue loctite and 20 inch-lbs of torque when mounting.
SKU: 197556292 • Weight: 0.15oz