EGW197556173
Egw Howa 1500/Weatherby Vanguard Sa 0 Moa$62.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Howa 1500/Weatherby Vanguard short action scope base is a one-piece steel mount engineered to give you a solid, low-profile foundation for your optic without the hassle of gunsmithing. Built for hunters and shooters running a Howa 1500 or Weatherby Vanguard short action, this base bolts directly to your rifle's factory receiver holes—no drilling, no tapping, no trips to the gunsmith. The integrated Picatinny rail lets you dial in your sight picture quickly and adjust eye relief on the fly, and it plays nice with either Picatinny or Weaver rings, so you're not locked into one ring choice.
EGW machined this base from 4140 carbon steel, pre-hardened to Rc 35-35, for the rigidity you need when you're pushing shots downrange or hunting in rough country. The 0 MOA design sits lower than lightweight mounts, keeping your scope closer to the bore for a flatter sight line and cleaner ballistics. Every cross-slot is gauged to military spec (MIL-STD 1913) within .002 inches—real precision in a piece of steel that won't let you down. You get socket head Torx screws and the wrench to install them; EGW recommends 20 inch-pounds of torque and a dab of blue Loctite to lock everything in place.
Whether you're dialing in a long-range hunting rig or setting up a tack-driving range gun, a quality scope base is non-negotiable, and this one delivers the repeatability and strength your rifle deserves.
| Product | EGW Howa 1500/Weatherby Vanguard SA Scope Base |
| Rifle Compatibility | Howa 1500 / Weatherby Vanguard (Short Action) |
| MOA | 0 MOA |
| Mount Type | One-piece Picatinny rail |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 4140 Carbon Steel |
| Hardness | Rc 35-35 (pre-hardened) |
| Picatinny Tolerance | MIL-STD 1913, +/-.002 inches |
| Fasteners Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds |
| Recommended Loctite | Blue |
Yes—this base is designed specifically for Howa 1500 and Weatherby Vanguard short action rifles and bolts directly to the factory receiver holes without modification.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap setups if needed.
0 MOA means the base sits at a neutral angle with no built-in elevation adjustment. The 0 MOA design on this mount also positions it lower than standard lightweight bases, keeping your optic closer to the barrel for a cleaner sight picture and improved shot placement.
The base includes socket head Torx screws and an installation wrench. EGW recommends using 20 inch-pounds of torque and blue Loctite (not included) when installing the screws.
SKU: 194196384 • Weight: 0.38oz
Availability: In Stock
The EGW Howa 1500/Weatherby Vanguard short action scope base is a one-piece steel mount engineered to give you a solid, low-profile foundation for your optic without the hassle of gunsmithing. Built for hunters and shooters running a Howa 1500 or Weatherby Vanguard short action, this base bolts directly to your rifle's factory receiver holes—no drilling, no tapping, no trips to the gunsmith. The integrated Picatinny rail lets you dial in your sight picture quickly and adjust eye relief on the fly, and it plays nice with either Picatinny or Weaver rings, so you're not locked into one ring choice.
EGW machined this base from 4140 carbon steel, pre-hardened to Rc 35-35, for the rigidity you need when you're pushing shots downrange or hunting in rough country. The 0 MOA design sits lower than lightweight mounts, keeping your scope closer to the bore for a flatter sight line and cleaner ballistics. Every cross-slot is gauged to military spec (MIL-STD 1913) within .002 inches—real precision in a piece of steel that won't let you down. You get socket head Torx screws and the wrench to install them; EGW recommends 20 inch-pounds of torque and a dab of blue Loctite to lock everything in place.
Whether you're dialing in a long-range hunting rig or setting up a tack-driving range gun, a quality scope base is non-negotiable, and this one delivers the repeatability and strength your rifle deserves.
| Product | EGW Howa 1500/Weatherby Vanguard SA Scope Base |
| Rifle Compatibility | Howa 1500 / Weatherby Vanguard (Short Action) |
| MOA | 0 MOA |
| Mount Type | One-piece Picatinny rail |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 4140 Carbon Steel |
| Hardness | Rc 35-35 (pre-hardened) |
| Picatinny Tolerance | MIL-STD 1913, +/-.002 inches |
| Fasteners Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds |
| Recommended Loctite | Blue |
Yes—this base is designed specifically for Howa 1500 and Weatherby Vanguard short action rifles and bolts directly to the factory receiver holes without modification.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap setups if needed.
0 MOA means the base sits at a neutral angle with no built-in elevation adjustment. The 0 MOA design on this mount also positions it lower than standard lightweight bases, keeping your optic closer to the barrel for a cleaner sight picture and improved shot placement.
The base includes socket head Torx screws and an installation wrench. EGW recommends using 20 inch-pounds of torque and blue Loctite (not included) when installing the screws.
SKU: 194196384 • Weight: 0.38oz