EGW197556322
Egw H&K Usp Trijicon Rmr Sight Mount$44.99
Availability: In Stock
The EGW H&K VP9/40, P30, and HK45 Trijicon RMR sight mount is a precision dovetail adapter built to swap your factory rear sight for a modern red dot optic. This 7075 aluminum mount gives you a quick, tool-free path to upgrade your HK handgun to red dot ready—no gunsmithing required. Install it in minutes, and you can just as easily remove it and restore your original sight whenever you want.
Shooters running Trijicon RMR or Holosun HS507C optics will appreciate the straightforward design: the mount sits flush in your gun's rear dovetail, and the included mounting hardware locks your red dot down solid. The matte black hardcoat finish blends seamlessly with duty and carry guns. Whether you're setting up a tactical VP9 for the range, upgrading your P30 for defensive work, or running a competition HK45, this mount keeps your optic exactly where it needs to be.
Installation is dead simple—remove the rear sight, slide the EGW mount into the dovetail, secure it with the provided set screw, then mount your red dot using the included flat head cap screws and a 5/64" allen wrench. Blue Loctite and a 15 inch-pound torque spec ensure everything stays locked in. The whole job takes a few minutes and zero permanent modifications to your gun.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | (2) 6-32 Flat Head Cap Screws, (1) 6-32 × 3/16 Set Screw |
| Wrench Size | 5/64" Allen Wrench |
| Recommended Torque | 15 inch-pounds |
The EGW mount is designed for the VP9/40, P30, and HK45. It will not fit Rock Island 1911s or other platforms.
This mount accepts Trijicon RMR and Holosun HS507C red dot sights.
No. The mount simply slides into your existing rear dovetail and is held in place with a set screw. You can remove it at any time and reinstall your factory rear sight without any permanent changes to your firearm.
You'll need a 5/64" allen wrench to install the mounting screws, blue Loctite (to be applied to the screws), and a torque wrench or screwdriver to tighten the screws to 15 inch-pounds. All mounting hardware is included with the mount.
SKU: 197556368 • Weight: 0.08oz
Availability: In Stock
The EGW H&K VP9/40, P30, and HK45 Trijicon RMR sight mount is a precision dovetail adapter built to swap your factory rear sight for a modern red dot optic. This 7075 aluminum mount gives you a quick, tool-free path to upgrade your HK handgun to red dot ready—no gunsmithing required. Install it in minutes, and you can just as easily remove it and restore your original sight whenever you want.
Shooters running Trijicon RMR or Holosun HS507C optics will appreciate the straightforward design: the mount sits flush in your gun's rear dovetail, and the included mounting hardware locks your red dot down solid. The matte black hardcoat finish blends seamlessly with duty and carry guns. Whether you're setting up a tactical VP9 for the range, upgrading your P30 for defensive work, or running a competition HK45, this mount keeps your optic exactly where it needs to be.
Installation is dead simple—remove the rear sight, slide the EGW mount into the dovetail, secure it with the provided set screw, then mount your red dot using the included flat head cap screws and a 5/64" allen wrench. Blue Loctite and a 15 inch-pound torque spec ensure everything stays locked in. The whole job takes a few minutes and zero permanent modifications to your gun.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | (2) 6-32 Flat Head Cap Screws, (1) 6-32 × 3/16 Set Screw |
| Wrench Size | 5/64" Allen Wrench |
| Recommended Torque | 15 inch-pounds |
The EGW mount is designed for the VP9/40, P30, and HK45. It will not fit Rock Island 1911s or other platforms.
This mount accepts Trijicon RMR and Holosun HS507C red dot sights.
No. The mount simply slides into your existing rear dovetail and is held in place with a set screw. You can remove it at any time and reinstall your factory rear sight without any permanent changes to your firearm.
You'll need a 5/64" allen wrench to install the mounting screws, blue Loctite (to be applied to the screws), and a torque wrench or screwdriver to tighten the screws to 15 inch-pounds. All mounting hardware is included with the mount.
SKU: 197556368 • Weight: 0.08oz