EGW197556136
Egw Cz P10C Trijicon Rmr Sight Mount$44.99
Availability: In Stock
The EGW CZ Shadow 2 Trijicon RMR sight mount transforms your competition or duty pistol into a modern red dot platform—no gunsmithing required. Built from 7075 aluminum and finished in matte black hardcoat, this mount simply slides into your gun's existing dovetail after you remove the factory rear sight. Installation is straightforward: slide the mount in, tighten the set screw, bolt on your RMR or compatible optic, and you're running a proven red dot setup. If you ever want to revert to iron sights, just reverse the process. The mount ships with all necessary hardware and a detailed installation guide.
This mount is engineered to fit the CZ Shadow 2, Baby Desert Eagle (post-2006), and EAA Witness Elite Match pistols. It accepts Trijicon RMR optics directly, making it ideal for shooters who want the speed and target acquisition of a red dot for competition, duty work, or practical pistol sports. The included flat head cap screws (which require a 5/64" allen wrench) are specifically sized for Trijicon RMR footprints, and the provided set screw ensures a rock-solid dovetail fit.
Installation takes about five minutes: remove your rear sight, install the mount in the dovetail, tighten the set screw, place your red dot on top, apply blue Loctite to the mounting screws, and torque them to 15 in-lbs. A small piece of paper under your optic during setup makes future removal cleaner. The entire assembly stays reversible—you're not drilling, milling, or permanently altering your pistol.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | 2× 6-32 Flat Head Cap Screws, 1× 6-32 × 3/16 Set Screw |
| Allen Wrench Size | 5/64" |
| Recommended Torque | 15 in-lbs |
Yes. This mount is purpose-built for the CZ Shadow 2 dovetail. It also fits the Baby Desert Eagle (post-2006) and EAA Witness Elite Match. It does not fit Rock Island 1911s.
The mount is designed for Trijicon RMR optics. It is also compatible with the Holosun HS507C. Always verify your specific red dot model before purchase.
No. The mount simply replaces your factory rear sight in the existing dovetail. No drilling, milling, or permanent alterations are required. You can remove it anytime and reinstall your original sight.
A 5/64" allen wrench (for the mounting screws), a torque wrench or hex key wrench capable of 15 in-lbs, and blue Loctite (not included). All other hardware is provided.
SKU: 197556343 • Weight: 0.08oz
Availability: In Stock
The EGW CZ Shadow 2 Trijicon RMR sight mount transforms your competition or duty pistol into a modern red dot platform—no gunsmithing required. Built from 7075 aluminum and finished in matte black hardcoat, this mount simply slides into your gun's existing dovetail after you remove the factory rear sight. Installation is straightforward: slide the mount in, tighten the set screw, bolt on your RMR or compatible optic, and you're running a proven red dot setup. If you ever want to revert to iron sights, just reverse the process. The mount ships with all necessary hardware and a detailed installation guide.
This mount is engineered to fit the CZ Shadow 2, Baby Desert Eagle (post-2006), and EAA Witness Elite Match pistols. It accepts Trijicon RMR optics directly, making it ideal for shooters who want the speed and target acquisition of a red dot for competition, duty work, or practical pistol sports. The included flat head cap screws (which require a 5/64" allen wrench) are specifically sized for Trijicon RMR footprints, and the provided set screw ensures a rock-solid dovetail fit.
Installation takes about five minutes: remove your rear sight, install the mount in the dovetail, tighten the set screw, place your red dot on top, apply blue Loctite to the mounting screws, and torque them to 15 in-lbs. A small piece of paper under your optic during setup makes future removal cleaner. The entire assembly stays reversible—you're not drilling, milling, or permanently altering your pistol.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | 2× 6-32 Flat Head Cap Screws, 1× 6-32 × 3/16 Set Screw |
| Allen Wrench Size | 5/64" |
| Recommended Torque | 15 in-lbs |
Yes. This mount is purpose-built for the CZ Shadow 2 dovetail. It also fits the Baby Desert Eagle (post-2006) and EAA Witness Elite Match. It does not fit Rock Island 1911s.
The mount is designed for Trijicon RMR optics. It is also compatible with the Holosun HS507C. Always verify your specific red dot model before purchase.
No. The mount simply replaces your factory rear sight in the existing dovetail. No drilling, milling, or permanent alterations are required. You can remove it anytime and reinstall your original sight.
A 5/64" allen wrench (for the mounting screws), a torque wrench or hex key wrench capable of 15 in-lbs, and blue Loctite (not included). All other hardware is provided.
SKU: 197556343 • Weight: 0.08oz