$44.99
Availability: In Stock
Current Stock: Out of stock
The EGW Browning BAR/BLR Long Action one-piece Picatinny base eliminates the need to drill or tap your rifle's receiver. Built from precision-machined 6061 T6 aluminum, this 20 MOA base attaches directly to your factory scope mount holes and gives you a true MIL-STD 1913 Picatinny rail for mounting optics. It's the fastest way to modernize an older Browning BAR or BLR with standard scope rings without gunsmithing.
If you already own quality Picatinny or Weaver rings, this base lets you use them on your Browning. The adjustable eye relief built into Picatinny mounting means you can dial in the perfect sight picture for your setup—whether you're running a lightweight variable or a compact fixed-power optic. The full-width cross-slots are gauged to exact MIL-STD 1913 specifications (+/-.002"), so fit and repeatability are solid from day one.
Setup is straightforward: the base bolts to the existing holes on your receiver using the included socket head Torx screws. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite for a permanent, reliable install. The milled center channel keeps weight minimal—important if you're counting ounces on a long-season hunt or backcountry pack-in.
| Brand | EGW |
| Firearm Fit | Browning BAR/BLR Long Action |
| Mount Type | One-Piece Picatinny Base |
| MOA Elevation | 20 MOA |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny |
| Slot Tolerance | +/-.002" |
| Color | Black |
| Included Hardware | Socket Head Torx Screws, Wrench |
| Recommended Torque | 20 inch-pounds with blue Loctite |
This base is designed specifically for Browning BAR and BLR rifles in Long Action. It uses your factory scope mount holes, so no gunsmithing is required.
Any rings designed for Picatinny or Weaver rails will work with this base. The full-width MIL-STD 1913 slots give you flexibility in optic choice and eye relief adjustment.
The 20 MOA built into this base provides 20 minutes of elevation adjustment built into the mount itself, tilting your scope upward. This is commonly used by long-range shooters to gain additional elevation adjustment at the scope or to compensate for ballistic drop at distance.
The base comes with socket head Torx screws for mounting to your receiver and a Torx wrench for installation. EGW recommends using 20 inch-pounds of torque with blue Loctite for a permanent install.
SKU: 197561521 • Weight: 0.17oz
Availability: In Stock
Current Stock: Out of stock
The EGW Browning BAR/BLR Long Action one-piece Picatinny base eliminates the need to drill or tap your rifle's receiver. Built from precision-machined 6061 T6 aluminum, this 20 MOA base attaches directly to your factory scope mount holes and gives you a true MIL-STD 1913 Picatinny rail for mounting optics. It's the fastest way to modernize an older Browning BAR or BLR with standard scope rings without gunsmithing.
If you already own quality Picatinny or Weaver rings, this base lets you use them on your Browning. The adjustable eye relief built into Picatinny mounting means you can dial in the perfect sight picture for your setup—whether you're running a lightweight variable or a compact fixed-power optic. The full-width cross-slots are gauged to exact MIL-STD 1913 specifications (+/-.002"), so fit and repeatability are solid from day one.
Setup is straightforward: the base bolts to the existing holes on your receiver using the included socket head Torx screws. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite for a permanent, reliable install. The milled center channel keeps weight minimal—important if you're counting ounces on a long-season hunt or backcountry pack-in.
| Brand | EGW |
| Firearm Fit | Browning BAR/BLR Long Action |
| Mount Type | One-Piece Picatinny Base |
| MOA Elevation | 20 MOA |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny |
| Slot Tolerance | +/-.002" |
| Color | Black |
| Included Hardware | Socket Head Torx Screws, Wrench |
| Recommended Torque | 20 inch-pounds with blue Loctite |
This base is designed specifically for Browning BAR and BLR rifles in Long Action. It uses your factory scope mount holes, so no gunsmithing is required.
Any rings designed for Picatinny or Weaver rails will work with this base. The full-width MIL-STD 1913 slots give you flexibility in optic choice and eye relief adjustment.
The 20 MOA built into this base provides 20 minutes of elevation adjustment built into the mount itself, tilting your scope upward. This is commonly used by long-range shooters to gain additional elevation adjustment at the scope or to compensate for ballistic drop at distance.
The base comes with socket head Torx screws for mounting to your receiver and a Torx wrench for installation. EGW recommends using 20 inch-pounds of torque with blue Loctite for a permanent install.
SKU: 197561521 • Weight: 0.17oz