Do-It Products179834925
Do-It Weedless Compact Jig Mold 1/4, 3/8, 1/2oz$48.60
Loading...
Loading...
Loading...
Availability: In Stock
The Do-It Weedless Brush Jig comes in three weight options—1/4, 3/8, and 1/2 ounce—and is purpose-built for anglers who need to fish heavy cover without constant hang-ups. This jig mold is engineered around the reality that bass fishing in brush, timber, and vegetation demands a lure that can penetrate thick structure and still hook up reliably. Do-It has wrapped lead around the eye itself to eliminate snagging points that typically cost you fish in the gnarliest spots. The hook angle was positioned specifically to maximize hook-set power when you're driving into wood or dense weeds, and the flattened bottom lets the jig stand upright on the presentation—a feature that keeps the point exposed and ready when a bass commits.
This is a lure mold, not a finished bait, so you'll be pouring your own jigs from Do-It cavities. The mold is engineered to work with a Mustad Ultra-Point Hook, which Do-It engineered the design around for maximum penetration and holding power. You get one 1/8 x 1" base hole pin per cavity to help you set up consistent pours. Whether you're stocking up on weedless jigs for a full season or experimenting with different colors and weights to dial in what the fish want, this three-cavity mold gives you flexibility to produce 1/4, 3/8, and 1/2 ounce versions on demand.
Weedless jig design is one of the few ways to fish aggressively in cover that shuts down less specialized lures. Do-It's approach—lead placement, hook geometry, and the stand-flat bottom—removes excuses when you're throwing into brush. If you're tying your own baits or just want control over your weedless jig inventory, this mold delivers the engineering that separates a snag magnet from a cover-crushing workhorse.
| Brand | Do-It Products |
| Product Type | Weedless Jig Mold |
| Weight Options | 1/4, 3/8, 1/2 ounce |
| Hook Size Base | 1/8 x 1" pin |
| Cavities | Three (one for each weight) |
| Included Accessories | One base hole pin per cavity |
The Do-It Weedless Brush Jig mold is engineered for the Mustad Ultra-Point Hook. The mold accepts a 1/8 x 1" base hole pin, and one pin is included per cavity.
Yes. This mold has three separate cavities, one for each weight: 1/4, 3/8, and 1/2 ounce. You can pour all three weights in a single session or switch between cavities as needed.
Do-It has placed lead around the eye to eliminate sharp snagging points, positioned the hook at an angle that performs in thick cover, and flattened the bottom so the jig stands upright with the point exposed—all features that reduce hangups when fishing vegetation, timber, and brush.
This is a lure mold. You pour your own jigs using lead and the included base hole pin. It's designed for anglers who want to customize colors and weights or build their own inventory of weedless jigs.
SKU: 127823292 • Weight: 2oz
Availability: In Stock
The Do-It Weedless Brush Jig comes in three weight options—1/4, 3/8, and 1/2 ounce—and is purpose-built for anglers who need to fish heavy cover without constant hang-ups. This jig mold is engineered around the reality that bass fishing in brush, timber, and vegetation demands a lure that can penetrate thick structure and still hook up reliably. Do-It has wrapped lead around the eye itself to eliminate snagging points that typically cost you fish in the gnarliest spots. The hook angle was positioned specifically to maximize hook-set power when you're driving into wood or dense weeds, and the flattened bottom lets the jig stand upright on the presentation—a feature that keeps the point exposed and ready when a bass commits.
This is a lure mold, not a finished bait, so you'll be pouring your own jigs from Do-It cavities. The mold is engineered to work with a Mustad Ultra-Point Hook, which Do-It engineered the design around for maximum penetration and holding power. You get one 1/8 x 1" base hole pin per cavity to help you set up consistent pours. Whether you're stocking up on weedless jigs for a full season or experimenting with different colors and weights to dial in what the fish want, this three-cavity mold gives you flexibility to produce 1/4, 3/8, and 1/2 ounce versions on demand.
Weedless jig design is one of the few ways to fish aggressively in cover that shuts down less specialized lures. Do-It's approach—lead placement, hook geometry, and the stand-flat bottom—removes excuses when you're throwing into brush. If you're tying your own baits or just want control over your weedless jig inventory, this mold delivers the engineering that separates a snag magnet from a cover-crushing workhorse.
| Brand | Do-It Products |
| Product Type | Weedless Jig Mold |
| Weight Options | 1/4, 3/8, 1/2 ounce |
| Hook Size Base | 1/8 x 1" pin |
| Cavities | Three (one for each weight) |
| Included Accessories | One base hole pin per cavity |
The Do-It Weedless Brush Jig mold is engineered for the Mustad Ultra-Point Hook. The mold accepts a 1/8 x 1" base hole pin, and one pin is included per cavity.
Yes. This mold has three separate cavities, one for each weight: 1/4, 3/8, and 1/2 ounce. You can pour all three weights in a single session or switch between cavities as needed.
Do-It has placed lead around the eye to eliminate sharp snagging points, positioned the hook at an angle that performs in thick cover, and flattened the bottom so the jig stands upright with the point exposed—all features that reduce hangups when fishing vegetation, timber, and brush.
This is a lure mold. You pour your own jigs using lead and the included base hole pin. It's designed for anglers who want to customize colors and weights or build their own inventory of weedless jigs.
SKU: 127823292 • Weight: 2oz