$74.95
Availability: In Stock
The DNZ Game Reaper 30mm scope mount for Marlin 1894 rifles is a straightforward, American-made solution for hunters who want to get an optic on their lever gun without guesswork or gunsmithing. This is a fixed mount that installs directly to your receiver's existing tapped holes—no drilling required. Built with solid engineering in mind, the Game Reaper accommodates standard 30mm scope tubes and delivers the sight height you need for hunting at distance or working with variable magnification optics. It's the kind of mount that gets out of the way and lets your rifle do the work.
DNZ designed this mount to work with both left and right-hand rifles, and it's engineered with six holes through the base so it adapts to both long and short receiver variants of the 1894—you'll use four of them depending on your rifle's configuration. The rings are standard .63" width with dual screws per ring for solid clamping. If you have a Henry rifle that's completely flat-topped and drilled and tapped for scope mounting, this mount will work there too, though the DNZ Game Reaper is purpose-built for the Marlin platform.
Installation uses basic tools: a 9/64" Allen wrench for base screws and a 7/64" for ring screws. You get a choice between medium (1.06" centerline height) and high (1.19" centerline height) configurations—pick high if you're running a larger objective or want maximum cheek weld clearance. Ring-to-ring spacing is 4.08" outside to outside, which puts your optic in a practical shooting position for most hunting and field applications.
| Tube Diameter | 30mm |
| Ring Width | .63" |
| Screws per Ring | 2 |
| Ring-to-Ring Spacing (Outside to Outside) | 4.08" |
| Base Screw Size | 8-40 X 1/4" (9/64" Allen wrench) |
| Ring Screw Size | 6-40 X 5/8" (7/64" Allen wrench) |
| Medium Height (Centerline) | 1.06" |
| High Height (Centerline) | 1.19" |
| Hole Spacing | .50" - 1.88" - .50" - .37" - .50" (6 holes total) |
| Finish | Black |
Yes—the Game Reaper is designed for Marlin 1894, 1895, and 336 XLR rifles. The base has six holes and uses four depending on your receiver length. Your rifle must have existing drilled and tapped holes; this is a direct-install mount, not a gunsmithing job.
Yes, but only if your Henry has a completely flat receiver top and is properly drilled and tapped for scope mounting. Not all Henry models meet these requirements, so verify your specific rifle before ordering.
Medium height (1.06" centerline) works for most hunters and standard cheek welds. Choose high (1.19" centerline) if you have a large objective lens, prefer a higher sight picture, or need clearance for your shooting position.
You'll need a 9/64" Allen wrench for the base screws and a 7/64" Allen wrench for the ring screws. A simple torque wrench is helpful to avoid over-tightening, though not essential.
SKU: 114464830 • Width: 3in • Height: 2.1in • Depth: 10.4in • Weight: 0.38oz
Availability: In Stock
The DNZ Game Reaper 30mm scope mount for Marlin 1894 rifles is a straightforward, American-made solution for hunters who want to get an optic on their lever gun without guesswork or gunsmithing. This is a fixed mount that installs directly to your receiver's existing tapped holes—no drilling required. Built with solid engineering in mind, the Game Reaper accommodates standard 30mm scope tubes and delivers the sight height you need for hunting at distance or working with variable magnification optics. It's the kind of mount that gets out of the way and lets your rifle do the work.
DNZ designed this mount to work with both left and right-hand rifles, and it's engineered with six holes through the base so it adapts to both long and short receiver variants of the 1894—you'll use four of them depending on your rifle's configuration. The rings are standard .63" width with dual screws per ring for solid clamping. If you have a Henry rifle that's completely flat-topped and drilled and tapped for scope mounting, this mount will work there too, though the DNZ Game Reaper is purpose-built for the Marlin platform.
Installation uses basic tools: a 9/64" Allen wrench for base screws and a 7/64" for ring screws. You get a choice between medium (1.06" centerline height) and high (1.19" centerline height) configurations—pick high if you're running a larger objective or want maximum cheek weld clearance. Ring-to-ring spacing is 4.08" outside to outside, which puts your optic in a practical shooting position for most hunting and field applications.
| Tube Diameter | 30mm |
| Ring Width | .63" |
| Screws per Ring | 2 |
| Ring-to-Ring Spacing (Outside to Outside) | 4.08" |
| Base Screw Size | 8-40 X 1/4" (9/64" Allen wrench) |
| Ring Screw Size | 6-40 X 5/8" (7/64" Allen wrench) |
| Medium Height (Centerline) | 1.06" |
| High Height (Centerline) | 1.19" |
| Hole Spacing | .50" - 1.88" - .50" - .37" - .50" (6 holes total) |
| Finish | Black |
Yes—the Game Reaper is designed for Marlin 1894, 1895, and 336 XLR rifles. The base has six holes and uses four depending on your receiver length. Your rifle must have existing drilled and tapped holes; this is a direct-install mount, not a gunsmithing job.
Yes, but only if your Henry has a completely flat receiver top and is properly drilled and tapped for scope mounting. Not all Henry models meet these requirements, so verify your specific rifle before ordering.
Medium height (1.06" centerline) works for most hunters and standard cheek welds. Choose high (1.19" centerline) if you have a large objective lens, prefer a higher sight picture, or need clearance for your shooting position.
You'll need a 9/64" Allen wrench for the base screws and a 7/64" Allen wrench for the ring screws. A simple torque wrench is helpful to avoid over-tightening, though not essential.
SKU: 114464830 • Width: 3in • Height: 2.1in • Depth: 10.4in • Weight: 0.38oz
