Availability: In Stock
The DNZ 2-Piece Game Reaper 2 scope mount for Browning A-Bolt 3 rifles is a purpose-built, lightweight aluminum solution that replaces the guesswork of generic mounts with precision engineering matched to your specific rifle. Built from solid-block 6061-T6 aluminum, this 30mm medium-height mount delivers the rigidity of traditional steel at roughly one-third the weight—a meaningful advantage whether you're glassing from a ridge or packing into backcountry. DNZ machines each mount to your gun's receiver, ensuring perfect alignment and eliminating the need for lapping or windage adjustments.
What sets this two-piece design apart is the internal ring geometry that maximizes eye relief adjustment without sacrificing strength. The tactical configuration uses four ring screws on each end—roughly four times the thread engagement of conventional mounts—creating a secure interface that absorbs recoil and temperature swings better than heavier alternatives. There are no moving parts between your rifle and optic, no windage screws that work loose over time, and no guesswork about fit. Medium height positions your scope centerline 1.06 inches above the receiver, a proven sweet spot for most hunting and range applications.
If you're running an A-Bolt 3 in short or long action, or even a compatible Savage Axis or Round Receiver with matching 8-40 base holes, this mount is ready to go. Assembly is straightforward: 8-40 base screws (9/64 Allen wrench) secure the bases to your receiver, and 6-40 ring screws (7/64 Allen wrench) lock down your scope. Made in the USA from premium materials, it's the kind of no-nonsense hardware that lets you focus on the hunt, not the gear.
| Brand | DNZ | |
| Model | Game Reaper 2 | |
| Firearm | Browning A-Bolt 3 | |
| Configuration | 2-Piece (Separate Bases and Rings) | |
| Tube Diameter | 30mm | |
| Height | Medium (1.06" centerline above receiver) | |
| Color | Black | |
| Material | 6061-T6 Aluminum | |
| Ring Width | 0.80" | |
| Ring Screws | 6-40 x 5/8" (4 per ring; 7/64 Allen wrench) | |
| Base Screws | 8-40 x 1/4" (9/64 Allen wrench) | |
| Weight | 2–3 ounces (varies by height style) | |
| Lapping Required | No | |
| Country of Origin | USA |
Yes, the DNZ Game Reaper 2 is machined specifically for Browning A-Bolt 3 receivers with 8-40 base screw holes. DNZ also notes that some Savage Axis and Savage Round Receiver rifles with matching 8-40 holes may fit, but you should verify your rifle's receiver holes before ordering.
The medium-height mount positions the scope centerline 1.06 inches above the receiver, a standard height for most hunting and range setups. DNZ offers low (0.94") and high (1.19") options separately if you need a different sight line.
Yes, the Game Reaper 2 is designed to accommodate both left and right-hand rifles in short or long action configurations.
No. DNZ machines each mount to fit your rifle's receiver perfectly, eliminating the need for lapping or shimming. Scope installation is straightforward once the bases and rings are secured to your rifle.
SKU: 200190942 • Width: 3.75in • Height: 2in • Depth: 11in • Weight: 0.345oz
Availability: In Stock
The DNZ 2-Piece Game Reaper 2 scope mount for Browning A-Bolt 3 rifles is a purpose-built, lightweight aluminum solution that replaces the guesswork of generic mounts with precision engineering matched to your specific rifle. Built from solid-block 6061-T6 aluminum, this 30mm medium-height mount delivers the rigidity of traditional steel at roughly one-third the weight—a meaningful advantage whether you're glassing from a ridge or packing into backcountry. DNZ machines each mount to your gun's receiver, ensuring perfect alignment and eliminating the need for lapping or windage adjustments.
What sets this two-piece design apart is the internal ring geometry that maximizes eye relief adjustment without sacrificing strength. The tactical configuration uses four ring screws on each end—roughly four times the thread engagement of conventional mounts—creating a secure interface that absorbs recoil and temperature swings better than heavier alternatives. There are no moving parts between your rifle and optic, no windage screws that work loose over time, and no guesswork about fit. Medium height positions your scope centerline 1.06 inches above the receiver, a proven sweet spot for most hunting and range applications.
If you're running an A-Bolt 3 in short or long action, or even a compatible Savage Axis or Round Receiver with matching 8-40 base holes, this mount is ready to go. Assembly is straightforward: 8-40 base screws (9/64 Allen wrench) secure the bases to your receiver, and 6-40 ring screws (7/64 Allen wrench) lock down your scope. Made in the USA from premium materials, it's the kind of no-nonsense hardware that lets you focus on the hunt, not the gear.
| Brand | DNZ | |
| Model | Game Reaper 2 | |
| Firearm | Browning A-Bolt 3 | |
| Configuration | 2-Piece (Separate Bases and Rings) | |
| Tube Diameter | 30mm | |
| Height | Medium (1.06" centerline above receiver) | |
| Color | Black | |
| Material | 6061-T6 Aluminum | |
| Ring Width | 0.80" | |
| Ring Screws | 6-40 x 5/8" (4 per ring; 7/64 Allen wrench) | |
| Base Screws | 8-40 x 1/4" (9/64 Allen wrench) | |
| Weight | 2–3 ounces (varies by height style) | |
| Lapping Required | No | |
| Country of Origin | USA |
Yes, the DNZ Game Reaper 2 is machined specifically for Browning A-Bolt 3 receivers with 8-40 base screw holes. DNZ also notes that some Savage Axis and Savage Round Receiver rifles with matching 8-40 holes may fit, but you should verify your rifle's receiver holes before ordering.
The medium-height mount positions the scope centerline 1.06 inches above the receiver, a standard height for most hunting and range setups. DNZ offers low (0.94") and high (1.19") options separately if you need a different sight line.
Yes, the Game Reaper 2 is designed to accommodate both left and right-hand rifles in short or long action configurations.
No. DNZ machines each mount to fit your rifle's receiver perfectly, eliminating the need for lapping or shimming. Scope installation is straightforward once the bases and rings are secured to your rifle.
SKU: 200190942 • Width: 3.75in • Height: 2in • Depth: 11in • Weight: 0.345oz