Diamondback115656253
Diamondback 7.62x39mm 16" Carbine-Length Black Nitride Chrome Moly Vanadium Steel OEM Replacement Barrel$112.50
Availability: In Stock
The Diamondback 7.62x39mm 10" carbine-length barrel is a drop-in replacement built for shooters running AK-pattern rifles or other 7.62x39 platforms. If you're looking to refresh your rifle's accuracy, extend barrel life, or simply want to experiment with a quality aftermarket option, this medium-contour barrel delivers solid performance at an accessible price point. The 10-inch length keeps the overall package nimble—ideal for hunting in tight cover, training at the range, or building a short-barreled system that doesn't sacrifice durability.
Machined from 4150 chrome moly steel and finished in black nitride, this barrel resists wear and corrosion through thousands of rounds. The button-rifled 5-groove bore and 1:9.5 twist rate stabilize standard 7.62x39 ammunition, while the 5/8x24 thread pattern accepts most suppressors and muzzle devices on the market. The target crown preserves accuracy by protecting the bore's critical exit point—a detail that matters when you're trying to ring steel at distance or dial in a hunting load.
If you're rebuilding a rifle or trying a new barrel length, confirm your rifle's threading and gas system compatibility before purchasing. The carbine-length gas system pairs naturally with short-stroke AK builds but may require tuning on other platforms. This is a genuine upgrade component, not a gimmick—treat it like the precision part it is.
| Caliber | 7.62x39mm |
| Length | 10" |
| Gas System | Carbine-Length |
| Barrel Contour | Medium |
| Material | 4150 Chrome Moly Steel |
| Finish | Black Nitride |
| Twist Rate | 1:9.5 |
| Thread Pattern | 5/8x24 |
| Rifling | Button Rifled, 5-Groove |
| Crown | Target Crown |
This is a 7.62x39mm barrel with carbine-length gas system and 5/8x24 threading. Confirm your rifle accepts a barrel with these specifications before ordering. Different AK platforms may require different headspacing or installation methods, so verify compatibility with your build.
The 5/8x24 thread pattern is a standard suppressor mounting interface, so most 7.62x39 suppressors and muzzle brakes rated for that thread pitch will fit. Confirm your suppressor's thread specifications match 5/8x24 before purchase.
The 1:9.5 twist is optimized for standard 7.62x39 ammunition. It provides reliable bullet stabilization across typical loads used in the caliber. If you're shooting unusual projectile weights or specialty loads, consult the manufacturer for guidance.
A target crown is a precisely machined recess at the barrel's muzzle that protects the rifling's exit point from impacts and debris. This preserves bore integrity and helps maintain accuracy, especially important if your barrel experiences rough handling or storage.
SKU: 115723586 • Width: 1.5in • Height: 1.4in • Depth: 11.9in • Weight: 1.2oz
Availability: In Stock
The Diamondback 7.62x39mm 10" carbine-length barrel is a drop-in replacement built for shooters running AK-pattern rifles or other 7.62x39 platforms. If you're looking to refresh your rifle's accuracy, extend barrel life, or simply want to experiment with a quality aftermarket option, this medium-contour barrel delivers solid performance at an accessible price point. The 10-inch length keeps the overall package nimble—ideal for hunting in tight cover, training at the range, or building a short-barreled system that doesn't sacrifice durability.
Machined from 4150 chrome moly steel and finished in black nitride, this barrel resists wear and corrosion through thousands of rounds. The button-rifled 5-groove bore and 1:9.5 twist rate stabilize standard 7.62x39 ammunition, while the 5/8x24 thread pattern accepts most suppressors and muzzle devices on the market. The target crown preserves accuracy by protecting the bore's critical exit point—a detail that matters when you're trying to ring steel at distance or dial in a hunting load.
If you're rebuilding a rifle or trying a new barrel length, confirm your rifle's threading and gas system compatibility before purchasing. The carbine-length gas system pairs naturally with short-stroke AK builds but may require tuning on other platforms. This is a genuine upgrade component, not a gimmick—treat it like the precision part it is.
| Caliber | 7.62x39mm |
| Length | 10" |
| Gas System | Carbine-Length |
| Barrel Contour | Medium |
| Material | 4150 Chrome Moly Steel |
| Finish | Black Nitride |
| Twist Rate | 1:9.5 |
| Thread Pattern | 5/8x24 |
| Rifling | Button Rifled, 5-Groove |
| Crown | Target Crown |
This is a 7.62x39mm barrel with carbine-length gas system and 5/8x24 threading. Confirm your rifle accepts a barrel with these specifications before ordering. Different AK platforms may require different headspacing or installation methods, so verify compatibility with your build.
The 5/8x24 thread pattern is a standard suppressor mounting interface, so most 7.62x39 suppressors and muzzle brakes rated for that thread pitch will fit. Confirm your suppressor's thread specifications match 5/8x24 before purchase.
The 1:9.5 twist is optimized for standard 7.62x39 ammunition. It provides reliable bullet stabilization across typical loads used in the caliber. If you're shooting unusual projectile weights or specialty loads, consult the manufacturer for guidance.
A target crown is a precisely machined recess at the barrel's muzzle that protects the rifling's exit point from impacts and debris. This preserves bore integrity and helps maintain accuracy, especially important if your barrel experiences rough handling or storage.
SKU: 115723586 • Width: 1.5in • Height: 1.4in • Depth: 11.9in • Weight: 1.2oz