$1,049.00
Loading...
Loading...
Loading...
Availability: In Stock
The Dead Air RXD30Ti is a lightweight titanium suppressor built for hunters and precision rifle shooters running .30 caliber cartridges. This 7.34-inch suppressor combines two of Dead Air's most proven baffle designs—Triskelion and Nomad technology—to deliver serious sound reduction without the weight penalty. Unlike many suppressors that feel like bolting a can onto your rifle, the RXD30Ti integrates internal E-Brake features that cut felt recoil by over 40% compared to an unsuppressed muzzle, which means less shoulder punishment on long days in the field or at the bench.
What sets the RXD30Ti apart is its construction method and thoughtful engineering. Dead Air manufactures this suppressor using additive (3D printing) processes, which yields a tube that's both stronger and lighter than traditional methods allow. The 12.4-ounce weight—or just 9.9 ounces if you run it without the mount—keeps it from throwing off your rifle's balance. It ships with a Direct Thread Brake Mount (5/8×24 thread), an installation tool, and a flash-hiding front cap designed to minimize baffle erosion and muzzle signature.
The RXD30Ti is rated for centerfire rifle cartridges from 6.5 Creedmoor through .300 PRC, with suggested minimum barrel lengths depending on whether you're running magnum or sub-magnum loads. It's also HUB-compatible, meaning it works with a full ecosystem of Dead Air quick-disconnect and direct-thread accessories on the market. No proprietary tools are needed for maintenance or adjustments—the design incorporates standard COTS (Commercial Off-The-Shelf) tool features throughout. For hunters and shooters who want effective suppression without carrying unnecessary weight, the RXD30Ti delivers real performance without compromise.
| Caliber | 6.5 Creedmoor, .308 Win, up to .300 PRC |
| Thread | 5/8×24 (Direct Thread Brake Mount) |
| Length | 7.34 inches |
| Diameter | 1.74 inches |
| Weight | 12.4 oz (with Direct Thread Brake mount) / 9.9 oz (suppressor only) |
| Suppressor Material | 6AL4V Titanium |
| Mount & Front Cap Material | Nitride 17-4 PH Stainless Steel |
| Muzzle Energy Rating | 4400 ft-lbs |
| Minimum Barrel Length (Magnum .30 cal) | 20 inches |
| Minimum Barrel Length (Sub-magnum: .308 Win, 5.56 NATO) | 12.5 inches |
| Minimum Barrel Length (Subsonic .300 BLK) | 6 inches |
| Full Auto Rated | No |
| Included Accessories | DTB324HT Direct Thread Brake Mount, installation tool, quick-start guide |
The RXD30Ti is rated for .30 caliber cartridges including 6.5 Creedmoor, .308 Winchester, and up to .300 PRC. Minimum barrel length depends on your load: 20 inches for magnum cartridges, 12.5 inches for sub-magnum rounds like .308 Win or 5.56 NATO, and 6 inches for subsonic .300 BLK.
The RXD30Ti ships with a Direct Thread Brake Mount in 5/8×24 thread. It's also HUB-compatible (1.375"-24 TPI), so you can use it with Dead Air's full line of HUB quick-disconnect and direct-thread accessories if you want to swap it between rifles.
The complete package with Direct Thread Brake Mount weighs 12.4 ounces; the suppressor alone is 9.9 ounces. The integrated E-Brake features reduce felt recoil by over 40% compared to shooting unsuppressed.
The RXD30Ti ships with the suppressor body, DTB324HT Direct Thread Brake Mount (5/8×24), an installation tool, and a quick-start guide. You do not need proprietary tools for assembly or maintenance.
SKU: 198467278 • Weight: 1.6oz
Availability: In Stock
The Dead Air RXD30Ti is a lightweight titanium suppressor built for hunters and precision rifle shooters running .30 caliber cartridges. This 7.34-inch suppressor combines two of Dead Air's most proven baffle designs—Triskelion and Nomad technology—to deliver serious sound reduction without the weight penalty. Unlike many suppressors that feel like bolting a can onto your rifle, the RXD30Ti integrates internal E-Brake features that cut felt recoil by over 40% compared to an unsuppressed muzzle, which means less shoulder punishment on long days in the field or at the bench.
What sets the RXD30Ti apart is its construction method and thoughtful engineering. Dead Air manufactures this suppressor using additive (3D printing) processes, which yields a tube that's both stronger and lighter than traditional methods allow. The 12.4-ounce weight—or just 9.9 ounces if you run it without the mount—keeps it from throwing off your rifle's balance. It ships with a Direct Thread Brake Mount (5/8×24 thread), an installation tool, and a flash-hiding front cap designed to minimize baffle erosion and muzzle signature.
The RXD30Ti is rated for centerfire rifle cartridges from 6.5 Creedmoor through .300 PRC, with suggested minimum barrel lengths depending on whether you're running magnum or sub-magnum loads. It's also HUB-compatible, meaning it works with a full ecosystem of Dead Air quick-disconnect and direct-thread accessories on the market. No proprietary tools are needed for maintenance or adjustments—the design incorporates standard COTS (Commercial Off-The-Shelf) tool features throughout. For hunters and shooters who want effective suppression without carrying unnecessary weight, the RXD30Ti delivers real performance without compromise.
| Caliber | 6.5 Creedmoor, .308 Win, up to .300 PRC |
| Thread | 5/8×24 (Direct Thread Brake Mount) |
| Length | 7.34 inches |
| Diameter | 1.74 inches |
| Weight | 12.4 oz (with Direct Thread Brake mount) / 9.9 oz (suppressor only) |
| Suppressor Material | 6AL4V Titanium |
| Mount & Front Cap Material | Nitride 17-4 PH Stainless Steel |
| Muzzle Energy Rating | 4400 ft-lbs |
| Minimum Barrel Length (Magnum .30 cal) | 20 inches |
| Minimum Barrel Length (Sub-magnum: .308 Win, 5.56 NATO) | 12.5 inches |
| Minimum Barrel Length (Subsonic .300 BLK) | 6 inches |
| Full Auto Rated | No |
| Included Accessories | DTB324HT Direct Thread Brake Mount, installation tool, quick-start guide |
The RXD30Ti is rated for .30 caliber cartridges including 6.5 Creedmoor, .308 Winchester, and up to .300 PRC. Minimum barrel length depends on your load: 20 inches for magnum cartridges, 12.5 inches for sub-magnum rounds like .308 Win or 5.56 NATO, and 6 inches for subsonic .300 BLK.
The RXD30Ti ships with a Direct Thread Brake Mount in 5/8×24 thread. It's also HUB-compatible (1.375"-24 TPI), so you can use it with Dead Air's full line of HUB quick-disconnect and direct-thread accessories if you want to swap it between rifles.
The complete package with Direct Thread Brake Mount weighs 12.4 ounces; the suppressor alone is 9.9 ounces. The integrated E-Brake features reduce felt recoil by over 40% compared to shooting unsuppressed.
The RXD30Ti ships with the suppressor body, DTB324HT Direct Thread Brake Mount (5/8×24), an installation tool, and a quick-start guide. You do not need proprietary tools for assembly or maintenance.
SKU: 198467278 • Weight: 1.6oz