Dead Air126512541
Dead Air Keymo Deadair Da305 Keymo Flash Hider Scar 17/ Muzzle$89.00
Loading...
Loading...
Loading...
Availability: In Stock
The Dead Air Keymo DA306 flash hider for SCAR 16 is a purpose-built muzzle device designed to work seamlessly with Dead Air's suppressor ecosystem. Built around the KeyMo quick-detach mounting system, this flash hider lets you swap suppressors without tools or permanent modifications—a major advantage if you're running multiple cans or want the flexibility to shoot unsuppressed. The DA306 threads directly onto SCAR 16 platforms with standard 1/2-28 threads and maintains compatibility with Dead Air's Sandman Series suppressors and KeyMo-equipped cans.
What sets this flash hider apart is its engineering approach to flash reduction. Dead Air's design uses mass-shifted, equal-length tines that work to minimize muzzle flash signature without the metallic "ping" that plagues some competing designs. That's a real benefit if you're doing low-light hunting, tactical training, or any shooting where muzzle signature matters. The pre-drilled pin and weld hole at the 6 o'clock position gives you the option to permanently attach it if regulations or your use case requires a fixed setup.
Constructed from 4140 HT alloy steel with black nitride finish, the DA306 is built to handle the heat and wear of regular use. At 4.08 ounces and 2.70 inches long, it's compact enough not to throw off your rifle's balance or create unwanted length concerns. Because it's part of the KeyMo system, suppressor removal doesn't cause carbon-locking onto the mount—you get clean, reliable detachment every time.
| Thread Pattern | 1/2-28 (SCAR 16) |
| Bore Diameter | .22 caliber |
| Material | 4140 HT Alloy Steel |
| Finish | Black Nitride |
| Weight | 4.08 oz |
| Length | 2.70" |
| Mount System | KeyMo Quick-Detach |
Yes. The DA306 is threaded for 1/2-28, which is the standard thread pattern for SCAR 16 rifles. It connects directly to your rifle and serves as the anchor point for KeyMo suppressors.
Yes. The DA306 is part of Dead Air's KeyMo ecosystem and is compatible with Sandman Series suppressors and any other KeyMo-equipped can. It works as the mounting interface between your rifle and suppressor.
Yes. The DA306 comes with a pre-drilled pin and weld hole at the 6 o'clock position, allowing you to pin and weld it permanently to your barrel if your situation requires a fixed setup.
Dead Air's design using equal-length tines is engineered to minimize the metallic ping that some flash hiders produce. You'll get flash reduction without that characteristic ringing sound.
SKU: 126513188 • Width: 4.4in • Height: 1.3in • Depth: 5.8in • Weight: 0.265oz
Availability: In Stock
The Dead Air Keymo DA306 flash hider for SCAR 16 is a purpose-built muzzle device designed to work seamlessly with Dead Air's suppressor ecosystem. Built around the KeyMo quick-detach mounting system, this flash hider lets you swap suppressors without tools or permanent modifications—a major advantage if you're running multiple cans or want the flexibility to shoot unsuppressed. The DA306 threads directly onto SCAR 16 platforms with standard 1/2-28 threads and maintains compatibility with Dead Air's Sandman Series suppressors and KeyMo-equipped cans.
What sets this flash hider apart is its engineering approach to flash reduction. Dead Air's design uses mass-shifted, equal-length tines that work to minimize muzzle flash signature without the metallic "ping" that plagues some competing designs. That's a real benefit if you're doing low-light hunting, tactical training, or any shooting where muzzle signature matters. The pre-drilled pin and weld hole at the 6 o'clock position gives you the option to permanently attach it if regulations or your use case requires a fixed setup.
Constructed from 4140 HT alloy steel with black nitride finish, the DA306 is built to handle the heat and wear of regular use. At 4.08 ounces and 2.70 inches long, it's compact enough not to throw off your rifle's balance or create unwanted length concerns. Because it's part of the KeyMo system, suppressor removal doesn't cause carbon-locking onto the mount—you get clean, reliable detachment every time.
| Thread Pattern | 1/2-28 (SCAR 16) |
| Bore Diameter | .22 caliber |
| Material | 4140 HT Alloy Steel |
| Finish | Black Nitride |
| Weight | 4.08 oz |
| Length | 2.70" |
| Mount System | KeyMo Quick-Detach |
Yes. The DA306 is threaded for 1/2-28, which is the standard thread pattern for SCAR 16 rifles. It connects directly to your rifle and serves as the anchor point for KeyMo suppressors.
Yes. The DA306 is part of Dead Air's KeyMo ecosystem and is compatible with Sandman Series suppressors and any other KeyMo-equipped can. It works as the mounting interface between your rifle and suppressor.
Yes. The DA306 comes with a pre-drilled pin and weld hole at the 6 o'clock position, allowing you to pin and weld it permanently to your barrel if your situation requires a fixed setup.
Dead Air's design using equal-length tines is engineered to minimize the metallic ping that some flash hiders produce. You'll get flash reduction without that characteristic ringing sound.
SKU: 126513188 • Width: 4.4in • Height: 1.3in • Depth: 5.8in • Weight: 0.265oz