$86.25
Availability: In Stock
The Dead Air Armament Blast Shroud in .458 caliber with DA458 Xeno adaptor and 1-1/8-28 thread is purpose-built to manage the punishing blast and concussion that comes with short-barreled rifle and pistol-caliber carbine setups. If you've shot an unsuppressed SBR and felt that brutal muzzle concussion—or worse, watched it send your shooting buddies scrambling—this linear compensator redirects that energy forward of the muzzle, creating a noticeably more pleasant experience for everyone on the line. It's not a suppressor, and it doesn't replace one, but on a short gun running naked, the Blast Shroud makes a measurable difference in flash signature and felt recoil management.
Dead Air's modular architecture means this .458 shroud integrates with other Dead Air muzzle devices and suppressors, so your investment plays well with the rest of your setup. The 1-1/8-28 thread accommodates Dead Air's DA458 Xeno adaptor and various mounting configurations. Construction is robust—4140 heat-treated alloy steel shroud with 4140HT and 17-4 stainless steel adapters, finished in black nitride. At 2.56 inches in length and just 4.6 ounces, it adds minimal weight while keeping the muzzle further from your support hand on shorter platforms, reducing the risk of accidental suppression if your grip drifts forward during aggressive shooting.
Linear muzzle compensation also helps maintain your sight picture between shots, which matters when follow-up speed counts. Whether you're running a .458 SOCOM pistol-caliber upper or a short-barreled rifle in that caliber, the Blast Shroud is a straightforward way to dial down the harassment without breaking your workflow or your bank account.
| Caliber | .458 |
| Thread | 1-1/8-28 |
| Included Adaptor | DA458 Xeno |
| Shroud Material | 4140 HT Alloy Steel |
| Adaptor Material | 4140HT Steel / 17-4 Stainless |
| Finish | Black Nitride |
| Length | 2.56 inches |
| Weight | 4.6 ounces |
| Through Bore | .458 Caliber |
Yes. The Dead Air Blast Shroud is built on a modular architecture and is designed to work with other Dead Air suppressors and muzzle devices. The included DA458 Xeno adaptor provides compatibility with Dead Air's ecosystem, and you can configure different combinations for different applications.
This Blast Shroud is chambered for .458 caliber with a 1-1/8-28 thread. It includes the DA458 Xeno adaptor for proper fitment and compatibility.
No. The Blast Shroud is a linear compensator designed to manage muzzle blast and concussion on unsuppressed short-barreled rifles and pistol-caliber carbines. It redirects flash and energy forward rather than suppressing sound, and it helps reduce muzzle rise to maintain sight picture between shots.
The package includes the Blast Shroud and the DA458 Xeno adaptor. The shroud comes finished in black nitride and is ready to install with the provided adaptor.
SKU: 194202088 • Weight: 0.38oz
Availability: In Stock
The Dead Air Armament Blast Shroud in .458 caliber with DA458 Xeno adaptor and 1-1/8-28 thread is purpose-built to manage the punishing blast and concussion that comes with short-barreled rifle and pistol-caliber carbine setups. If you've shot an unsuppressed SBR and felt that brutal muzzle concussion—or worse, watched it send your shooting buddies scrambling—this linear compensator redirects that energy forward of the muzzle, creating a noticeably more pleasant experience for everyone on the line. It's not a suppressor, and it doesn't replace one, but on a short gun running naked, the Blast Shroud makes a measurable difference in flash signature and felt recoil management.
Dead Air's modular architecture means this .458 shroud integrates with other Dead Air muzzle devices and suppressors, so your investment plays well with the rest of your setup. The 1-1/8-28 thread accommodates Dead Air's DA458 Xeno adaptor and various mounting configurations. Construction is robust—4140 heat-treated alloy steel shroud with 4140HT and 17-4 stainless steel adapters, finished in black nitride. At 2.56 inches in length and just 4.6 ounces, it adds minimal weight while keeping the muzzle further from your support hand on shorter platforms, reducing the risk of accidental suppression if your grip drifts forward during aggressive shooting.
Linear muzzle compensation also helps maintain your sight picture between shots, which matters when follow-up speed counts. Whether you're running a .458 SOCOM pistol-caliber upper or a short-barreled rifle in that caliber, the Blast Shroud is a straightforward way to dial down the harassment without breaking your workflow or your bank account.
| Caliber | .458 |
| Thread | 1-1/8-28 |
| Included Adaptor | DA458 Xeno |
| Shroud Material | 4140 HT Alloy Steel |
| Adaptor Material | 4140HT Steel / 17-4 Stainless |
| Finish | Black Nitride |
| Length | 2.56 inches |
| Weight | 4.6 ounces |
| Through Bore | .458 Caliber |
Yes. The Dead Air Blast Shroud is built on a modular architecture and is designed to work with other Dead Air suppressors and muzzle devices. The included DA458 Xeno adaptor provides compatibility with Dead Air's ecosystem, and you can configure different combinations for different applications.
This Blast Shroud is chambered for .458 caliber with a 1-1/8-28 thread. It includes the DA458 Xeno adaptor for proper fitment and compatibility.
No. The Blast Shroud is a linear compensator designed to manage muzzle blast and concussion on unsuppressed short-barreled rifles and pistol-caliber carbines. It redirects flash and energy forward rather than suppressing sound, and it helps reduce muzzle rise to maintain sight picture between shots.
The package includes the Blast Shroud and the DA458 Xeno adaptor. The shroud comes finished in black nitride and is ready to install with the provided adaptor.
SKU: 194202088 • Weight: 0.38oz