Ultradyne USA115654660
Ultradyne Mercury 1/2x28 Muzzle Brake - Precision Recoil Reduction$99.93
Availability: In Stock
The Daniel Defense DDWAVE Muzzle Brake is a precision-engineered mounting interface designed for AR-15 shooters running the DD WAVE suppressor system. Built from aerospace-grade 17-4 PH stainless steel and finished with salt bath nitride coating, this brake handles the rigors of suppressed shooting while keeping corrosion at bay. The DDWAVE brake threads onto your 5.56mm NATO barrel at 1/2x28 TPI and serves as the anchor point for quick and repeatable suppressor mounting—critical if you're running suppressed uppers on the same host or swapping between platforms.
What sets this brake apart is its heavy acme thread design, which actively combats carbon buildup during suppressor removal. Anyone who's run suppressors knows that carbon and heat can make detachment a chore; DD's approach here is practical. After extended shooting sessions, the brake's geometry helps you unscrew the suppressor without fighting stuck threads or needing extra tools. It's the kind of detail that matters when you're focused on the shot, not wrestling hardware.
The DDWAVE system is purpose-built for shooters who demand repeatable, fast suppressor attachment and removal. Whether you're working a precision rifle course, hunting, or logging time at the range, this brake keeps your suppressors on—and lets them off—when you want. At 2.23 inches long and 3.84 ounces, it's a lean, efficient addition to your barrel setup. If you're already invested in DD's suppressor ecosystem, this is the right interface for your 5.56 AR.
| Thread Size | 1/2x28 TPI |
| Caliber | 5.56mm NATO |
| Length | 2.23 inches |
| Weight | 3.84 ounces |
| Material | 17-4 PH stainless steel |
| Finish | Salt bath nitride |
The DDWAVE brake is designed as the mounting interface for Daniel Defense WAVE suppressors. It threads onto your barrel and accepts the suppressor's quick-attach mechanism.
This brake threads onto 5.56mm NATO barrels with 1/2x28 TPI threading. If your barrel has that thread pitch, it will fit. If your barrel has a different thread size (such as 5/8x24), you'll need a different brake.
The heavy acme thread design helps prevent carbon from building up and binding the suppressor during removal. This makes detachment easier and faster, even after extended shooting sessions with the suppressor attached.
You receive the DDWAVE muzzle brake. Installation onto your barrel requires appropriate gunsmithing or armorer tools and expertise.
SKU: 126513690 • Width: 2.25in • Height: 1.5in • Depth: 3in • Weight: 0.31oz
Availability: In Stock
The Daniel Defense DDWAVE Muzzle Brake is a precision-engineered mounting interface designed for AR-15 shooters running the DD WAVE suppressor system. Built from aerospace-grade 17-4 PH stainless steel and finished with salt bath nitride coating, this brake handles the rigors of suppressed shooting while keeping corrosion at bay. The DDWAVE brake threads onto your 5.56mm NATO barrel at 1/2x28 TPI and serves as the anchor point for quick and repeatable suppressor mounting—critical if you're running suppressed uppers on the same host or swapping between platforms.
What sets this brake apart is its heavy acme thread design, which actively combats carbon buildup during suppressor removal. Anyone who's run suppressors knows that carbon and heat can make detachment a chore; DD's approach here is practical. After extended shooting sessions, the brake's geometry helps you unscrew the suppressor without fighting stuck threads or needing extra tools. It's the kind of detail that matters when you're focused on the shot, not wrestling hardware.
The DDWAVE system is purpose-built for shooters who demand repeatable, fast suppressor attachment and removal. Whether you're working a precision rifle course, hunting, or logging time at the range, this brake keeps your suppressors on—and lets them off—when you want. At 2.23 inches long and 3.84 ounces, it's a lean, efficient addition to your barrel setup. If you're already invested in DD's suppressor ecosystem, this is the right interface for your 5.56 AR.
| Thread Size | 1/2x28 TPI |
| Caliber | 5.56mm NATO |
| Length | 2.23 inches |
| Weight | 3.84 ounces |
| Material | 17-4 PH stainless steel |
| Finish | Salt bath nitride |
The DDWAVE brake is designed as the mounting interface for Daniel Defense WAVE suppressors. It threads onto your barrel and accepts the suppressor's quick-attach mechanism.
This brake threads onto 5.56mm NATO barrels with 1/2x28 TPI threading. If your barrel has that thread pitch, it will fit. If your barrel has a different thread size (such as 5/8x24), you'll need a different brake.
The heavy acme thread design helps prevent carbon from building up and binding the suppressor during removal. This makes detachment easier and faster, even after extended shooting sessions with the suppressor attached.
You receive the DDWAVE muzzle brake. Installation onto your barrel requires appropriate gunsmithing or armorer tools and expertise.
SKU: 126513690 • Width: 2.25in • Height: 1.5in • Depth: 3in • Weight: 0.31oz