Daniel Defense120918680
Daniel Defense DDM4 M4A1 CA Compliant .223 Rem/5.56 AR-15 Rifle - Model 08806027055$2,344.00
Availability: In Stock
The Daniel Defense DDM4 V7 CA Compliant AR-15 rifle is a purpose-built 5.56 NATO/.223 Rem platform engineered for shooters who demand both reliability and precision in a mid-length, magazine-fed configuration. Built to California legal standards, this 16-inch cold hammer-forged rifle combines Daniel Defense's reputation for quality American manufacturing with modern ergonomics and modular accessory mounting. Whether you're setting up a home defense rifle, a reliable range gun, or a precision platform you'll fine-tune over time, the V7 delivers the accuracy and controls that make AR-15 shooting intuitive and repeatable.
At the heart of the DDM4 V7 is a cold hammer-forged Chrome Moly Vanadium barrel with a 1:7 twist rate, chrome-lined bore, and mil-spec heavy phosphate coating—proven geometry that balances velocity and accuracy across standard 5.56 loads. The mid-length gas system cycles reliably while reducing perceived recoil and minimizing wear on the bolt carrier group compared to carbine-length alternatives. Daniel Defense's pinned low-profile gas block sits solidly behind the MFR 15.0 handguard, keeping your setup lean and ready for accessories.
Modularity is built in: the MFR 15.0 handguard features M-LOK attachment along seven positions and an uninterrupted Picatinny rail on top, so you can mount lights, lasers, grips, or backup iron sights exactly where you need them. The independently ambi GRIP-N-RIP charging handle works for both left- and right-handed shooters. A Daniel Defense flash suppressor cuts muzzle signature, while the buttstock and pistol grip feature soft-touch polymer for control through extended shooting sessions. Mil-spec receiver construction throughout—CNC-machined 7075-T6 aluminum with Type III hard anodize—means your rifle will track true and hold zero. Ships with a Daniel Defense impact case and Magpul PMAG 10-round magazine. Made in the USA.
| Caliber | 5.56 NATO / .223 Rem |
| Barrel Length | 16 inches |
| Barrel Profile | Government |
| Barrel Twist | 1:7 |
| Gas System | Mid-length Direct Impingement |
| Muzzle Thread | 1/2x28 TPI |
| Handguard | Daniel Defense MFR 15.0 (M-LOK) |
| Mounting System | M-LOK and Picatinny Rail |
| Lower Receiver | Mil-Spec 7075-T6 Aluminum, Type III Hard Anodize, Enhanced Flared Magazine Well |
| Upper Receiver | Mil-Spec 7075-T6 Aluminum, Type III Hard Anodize, M4 Feed Ramps |
| Charging Handle | Ambi GRIP-N-RIP (7075-T6 and 6061-T6 Aluminum) |
| Buttstock | Daniel Defense 6-Position (Glass Filled Polymer) |
| Pistol Grip | Daniel Defense (Glass Filled Polymer) |
| Bolt Carrier Group | M16 Profile, Mil-Spec, Chrome Lined, Properly Staked Gas Key |
| Buffer | H Buffer |
| Overall Length | 32.25" to 35.875" (stock-dependent) |
| Weight | 6.2 lbs |
| Magazine | Magpul PMAG 10-round (included) |
| Case | Daniel Defense Full-Latch Impact Plastic Case |
| Country of Origin | USA |
Yes. This is the CA-compliant configuration, built to meet California legal requirements for semi-automatic rifles.
The rifle comes with a Magpul PMAG 10-round magazine and a Daniel Defense full-latch impact plastic case.
Yes. The ambi GRIP-N-RIP charging handle is independently ambidextrous and works smoothly for both left- and right-handed shooters.
The MFR 15.0 features M-LOK attachment slots along seven positions and a full-length Picatinny rail on top, so you can mount lights, lasers, grips, backup sights, and other M-LOK and Picatinny-compatible accessories.
SKU: 120914770 • Width: 11.5in • Height: 5in • Depth: 43.8in • Weight: 9oz
Availability: In Stock
The Daniel Defense DDM4 V7 CA Compliant AR-15 rifle is a purpose-built 5.56 NATO/.223 Rem platform engineered for shooters who demand both reliability and precision in a mid-length, magazine-fed configuration. Built to California legal standards, this 16-inch cold hammer-forged rifle combines Daniel Defense's reputation for quality American manufacturing with modern ergonomics and modular accessory mounting. Whether you're setting up a home defense rifle, a reliable range gun, or a precision platform you'll fine-tune over time, the V7 delivers the accuracy and controls that make AR-15 shooting intuitive and repeatable.
At the heart of the DDM4 V7 is a cold hammer-forged Chrome Moly Vanadium barrel with a 1:7 twist rate, chrome-lined bore, and mil-spec heavy phosphate coating—proven geometry that balances velocity and accuracy across standard 5.56 loads. The mid-length gas system cycles reliably while reducing perceived recoil and minimizing wear on the bolt carrier group compared to carbine-length alternatives. Daniel Defense's pinned low-profile gas block sits solidly behind the MFR 15.0 handguard, keeping your setup lean and ready for accessories.
Modularity is built in: the MFR 15.0 handguard features M-LOK attachment along seven positions and an uninterrupted Picatinny rail on top, so you can mount lights, lasers, grips, or backup iron sights exactly where you need them. The independently ambi GRIP-N-RIP charging handle works for both left- and right-handed shooters. A Daniel Defense flash suppressor cuts muzzle signature, while the buttstock and pistol grip feature soft-touch polymer for control through extended shooting sessions. Mil-spec receiver construction throughout—CNC-machined 7075-T6 aluminum with Type III hard anodize—means your rifle will track true and hold zero. Ships with a Daniel Defense impact case and Magpul PMAG 10-round magazine. Made in the USA.
| Caliber | 5.56 NATO / .223 Rem |
| Barrel Length | 16 inches |
| Barrel Profile | Government |
| Barrel Twist | 1:7 |
| Gas System | Mid-length Direct Impingement |
| Muzzle Thread | 1/2x28 TPI |
| Handguard | Daniel Defense MFR 15.0 (M-LOK) |
| Mounting System | M-LOK and Picatinny Rail |
| Lower Receiver | Mil-Spec 7075-T6 Aluminum, Type III Hard Anodize, Enhanced Flared Magazine Well |
| Upper Receiver | Mil-Spec 7075-T6 Aluminum, Type III Hard Anodize, M4 Feed Ramps |
| Charging Handle | Ambi GRIP-N-RIP (7075-T6 and 6061-T6 Aluminum) |
| Buttstock | Daniel Defense 6-Position (Glass Filled Polymer) |
| Pistol Grip | Daniel Defense (Glass Filled Polymer) |
| Bolt Carrier Group | M16 Profile, Mil-Spec, Chrome Lined, Properly Staked Gas Key |
| Buffer | H Buffer |
| Overall Length | 32.25" to 35.875" (stock-dependent) |
| Weight | 6.2 lbs |
| Magazine | Magpul PMAG 10-round (included) |
| Case | Daniel Defense Full-Latch Impact Plastic Case |
| Country of Origin | USA |
Yes. This is the CA-compliant configuration, built to meet California legal requirements for semi-automatic rifles.
The rifle comes with a Magpul PMAG 10-round magazine and a Daniel Defense full-latch impact plastic case.
Yes. The ambi GRIP-N-RIP charging handle is independently ambidextrous and works smoothly for both left- and right-handed shooters.
The MFR 15.0 features M-LOK attachment slots along seven positions and a full-length Picatinny rail on top, so you can mount lights, lasers, grips, backup sights, and other M-LOK and Picatinny-compatible accessories.
SKU: 120914770 • Width: 11.5in • Height: 5in • Depth: 43.8in • Weight: 9oz