Availability: In Stock
Current Stock: Out of stock
The Daniel Defense DDM4 V7 Pro is a 5.56 NATO competition rifle purpose-built for shooters who demand speed, accuracy, and reliability across demanding multi-gun stages. This California-compliant platform combines Daniel Defense's proven engineering with competition-focused features that reward precise shooting and fast transitions. The 18-inch cold hammer-forged barrel delivers the velocity and accuracy needed for distance work while the rifle-length gas system tames recoil and manages muzzle climb—critical advantages when you're chasing podium finishes.
What sets the V7 Pro apart is its thoughtful trigger and ergonomic system. The Geissele Super Dynamic 3 Gun trigger—a standard that's earned its reputation in serious competition—gives you a light, short pull with excellent reset, letting you land faster follow-ups with less fatigue. The independently ambidextrous GRIP-N-RIP charging handle works equally well for left and right-handed shooters, and the Daniel Defense Muzzle Climb Mitigator Gen II actively redirects gas to counter both recoil and climb. These aren't gimmicks; they're working features that measurably improve split times and shot placement under pressure.
Build quality throughout reflects Daniel Defense's mil-spec foundation and precision CNC work. The MFR 15.0 M-LOK handguard cuts weight without sacrificing strength, while the aluminum upper and lower receivers are Type III hard coat anodized for durability. The bolt carrier group is mil-spec M16 profile with properly staked gas key, and the chrome-lined, phosphate-coated barrel is HP/MPI tested. A Daniel Defense buttstock with SoftTouch overmolding and matching pistol grip provide consistent, comfortable control session after session. Ships in a Daniel Defense full-latch impact case with a Magpul PMAG 10-round magazine. Sights sold separately. Made in the USA.
| Caliber | 5.56 NATO |
| Barrel Length | 18 inches |
| Barrel Profile | S2W (Daniel Defense proprietary heavy barrel) |
| Barrel Material | Chrome moly vanadium steel, cold hammer forged, chrome lined, mil-spec heavy phosphate coated, HP/MPI tested |
| Twist Rate | 1:7 |
| Gas System | Rifle length, direct impingement with pinned low profile gas block |
| Upper Receiver | 7075-T6 aluminum, mil-spec, type III hard coat anodized |
| Lower Receiver | 7075-T6 aluminum, mil-spec, type III hard coat anodized, enhanced flared magazine well, rear QD swivel attachment point |
| Handguard | Daniel Defense MFR 15.0, 6061-T6 aluminum, M-LOK attachment, type III hard coat anodized |
| Trigger | Geissele Automatics Super Dynamic 3 Gun |
| Charging Handle | Daniel Defense GRIP-N-RIP, ambidextrous, 7075-T6/6061-T6 aluminum with stainless steel roll pins |
| Bolt Carrier Group | M16 profile, mil-spec, MP tested, chrome lined, properly staked gas key |
| Buffer | H Buffer |
| Receiver Extension | 6-position mil-spec, 7075-T6 aluminum |
| Stock | Daniel Defense, glass-filled polymer with soft touch overmolding |
| Pistol Grip | Daniel Defense, glass-filled polymer with soft touch overmolding |
| Muzzle Device | Daniel Defense Muzzle Climb Mitigator Gen II, 17-4 PH stainless steel, salt bath nitride finished, 1/2x28 TPI threads |
| Mounting System | M-LOK and top picatinny rail |
| Weight | 7.4 lbs |
| Overall Length | 34.75–37.875 inches (with muzzle device) |
| Magazine | Magpul PMAG 10-round (California compliant) |
| Includes | Daniel Defense full-latch impact plastic case |
| Sights | Not included (sold separately) |
| Country of Origin | USA |
Yes. The DDM4 V7 Pro is specifically designed for multi-gun competition, with features like the Geissele Super Dynamic 3 Gun trigger, Muzzle Climb Mitigator, and rifle-length gas system all chosen to improve speed, accuracy, and shot recovery in demanding stages.
The rifle features M-LOK attachment points on the MFR 15.0 handguard and an uninterrupted top picatinny rail for optics and rail-mounted iron sights. Sights are sold separately, giving you the freedom to choose your preferred setup.
The rifle comes with a Daniel Defense full-latch impact plastic case and one Magpul PMAG 10-round magazine. Sights and other optics/accessories are not included.
Yes. The GRIP-N-RIP charging handle is independently ambidextrous, accommodating both left- and right-handed shooters equally well.
The 18-inch cold hammer-forged barrel with Daniel Defense's S2W heavy profile balances velocity, accuracy, and controllability across typical multi-gun distances. It's long enough for reliable performance at distance but doesn't sacrifice the handling speed needed for closer or transitional targets.
SKU: 198467817 • Weight: 8oz
Availability: In Stock
Current Stock: Out of stock
The Daniel Defense DDM4 V7 Pro is a 5.56 NATO competition rifle purpose-built for shooters who demand speed, accuracy, and reliability across demanding multi-gun stages. This California-compliant platform combines Daniel Defense's proven engineering with competition-focused features that reward precise shooting and fast transitions. The 18-inch cold hammer-forged barrel delivers the velocity and accuracy needed for distance work while the rifle-length gas system tames recoil and manages muzzle climb—critical advantages when you're chasing podium finishes.
What sets the V7 Pro apart is its thoughtful trigger and ergonomic system. The Geissele Super Dynamic 3 Gun trigger—a standard that's earned its reputation in serious competition—gives you a light, short pull with excellent reset, letting you land faster follow-ups with less fatigue. The independently ambidextrous GRIP-N-RIP charging handle works equally well for left and right-handed shooters, and the Daniel Defense Muzzle Climb Mitigator Gen II actively redirects gas to counter both recoil and climb. These aren't gimmicks; they're working features that measurably improve split times and shot placement under pressure.
Build quality throughout reflects Daniel Defense's mil-spec foundation and precision CNC work. The MFR 15.0 M-LOK handguard cuts weight without sacrificing strength, while the aluminum upper and lower receivers are Type III hard coat anodized for durability. The bolt carrier group is mil-spec M16 profile with properly staked gas key, and the chrome-lined, phosphate-coated barrel is HP/MPI tested. A Daniel Defense buttstock with SoftTouch overmolding and matching pistol grip provide consistent, comfortable control session after session. Ships in a Daniel Defense full-latch impact case with a Magpul PMAG 10-round magazine. Sights sold separately. Made in the USA.
| Caliber | 5.56 NATO |
| Barrel Length | 18 inches |
| Barrel Profile | S2W (Daniel Defense proprietary heavy barrel) |
| Barrel Material | Chrome moly vanadium steel, cold hammer forged, chrome lined, mil-spec heavy phosphate coated, HP/MPI tested |
| Twist Rate | 1:7 |
| Gas System | Rifle length, direct impingement with pinned low profile gas block |
| Upper Receiver | 7075-T6 aluminum, mil-spec, type III hard coat anodized |
| Lower Receiver | 7075-T6 aluminum, mil-spec, type III hard coat anodized, enhanced flared magazine well, rear QD swivel attachment point |
| Handguard | Daniel Defense MFR 15.0, 6061-T6 aluminum, M-LOK attachment, type III hard coat anodized |
| Trigger | Geissele Automatics Super Dynamic 3 Gun |
| Charging Handle | Daniel Defense GRIP-N-RIP, ambidextrous, 7075-T6/6061-T6 aluminum with stainless steel roll pins |
| Bolt Carrier Group | M16 profile, mil-spec, MP tested, chrome lined, properly staked gas key |
| Buffer | H Buffer |
| Receiver Extension | 6-position mil-spec, 7075-T6 aluminum |
| Stock | Daniel Defense, glass-filled polymer with soft touch overmolding |
| Pistol Grip | Daniel Defense, glass-filled polymer with soft touch overmolding |
| Muzzle Device | Daniel Defense Muzzle Climb Mitigator Gen II, 17-4 PH stainless steel, salt bath nitride finished, 1/2x28 TPI threads |
| Mounting System | M-LOK and top picatinny rail |
| Weight | 7.4 lbs |
| Overall Length | 34.75–37.875 inches (with muzzle device) |
| Magazine | Magpul PMAG 10-round (California compliant) |
| Includes | Daniel Defense full-latch impact plastic case |
| Sights | Not included (sold separately) |
| Country of Origin | USA |
Yes. The DDM4 V7 Pro is specifically designed for multi-gun competition, with features like the Geissele Super Dynamic 3 Gun trigger, Muzzle Climb Mitigator, and rifle-length gas system all chosen to improve speed, accuracy, and shot recovery in demanding stages.
The rifle features M-LOK attachment points on the MFR 15.0 handguard and an uninterrupted top picatinny rail for optics and rail-mounted iron sights. Sights are sold separately, giving you the freedom to choose your preferred setup.
The rifle comes with a Daniel Defense full-latch impact plastic case and one Magpul PMAG 10-round magazine. Sights and other optics/accessories are not included.
Yes. The GRIP-N-RIP charging handle is independently ambidextrous, accommodating both left- and right-handed shooters equally well.
The 18-inch cold hammer-forged barrel with Daniel Defense's S2W heavy profile balances velocity, accuracy, and controllability across typical multi-gun distances. It's long enough for reliable performance at distance but doesn't sacrifice the handling speed needed for closer or transitional targets.
SKU: 198467817 • Weight: 8oz