CZ USA120916826
CZ Bren 2 MS Carbine 5.56x45mm 16" Barrel 30-Round - Black$2,232.00
Availability: In Stock
The CZ Bren 2 MS pistol in 5.56x45mm represents a clean-sheet redesign of the proven Bren platform, bringing modern engineering and AR-platform familiarity to a compact, modular package. Built around a trimmed aluminum receiver and carbon-fiber-reinforced polymer lower, this 14-inch barreled pistol cuts weight without compromising the durability that's made CZ a trusted name in military and civilian service. If you're looking for a modern pistol-caliber alternative to the AR-9, or you want a highly adaptable 5.56 pistol with genuine Czech engineering, the Bren 2 MS rewards shooters who appreciate thoughtful design over marketing hype.
The Bren 2 MS borrows heavily from AR ergonomics—intentionally. You'll find an AR-style bolt catch on both sides of the platform, plus dual magazine releases and an ambidextrous safety in familiar locations. The non-reciprocating charging handle stows forward and doubles as a forward assist, staying out of your way until you need it. Feed reliability is baked in: the 14-inch cold hammer-forged barrel pairs with proven AR-15 magazines (30-round capacity), so ammunition logistics are straightforward. Folding adjustable sights keep the top rail clean for optics.
The modular forend and barrel-swap capability mean you're not locked into one configuration. The pistol comes set up with a flush rear plate that accepts AR-style buffer tubes, so mounting an arm brace or stabilizing device is plug-and-play if that's your intended setup. Those planning an SBR conversion will find factory stocks and carbine buffer tubes available to complete that path. Stippled grips and a 5.86-pound weight balance make it manageable in close quarters and in vehicle carry scenarios, whether you're a competitive shooter, home defender, or overlander prioritizing practical firepower.
| Caliber | .223/5.56x45mm NATO |
| Barrel Length | 14.17 inches |
| Barrel Type | Cold hammer-forged |
| Magazine Capacity | 30 rounds |
| Magazine Compatibility | AR-15/M16 standard |
| Receiver | Aluminum with carbon-fiber-reinforced polymer lower |
| Safety | Ambidextrous manual safety |
| Sights | Folding adjustable |
| Grip | Stippled |
| Weight | 5.86 lbs |
| Overall Length | 25.8 inches |
| Finish | Black |
| Model | 91452 |
Yes. The 5.56x45mm Bren 2 MS uses AR-15/M16 standard magazines with a 30-round capacity, so magazine availability and cost are on par with the vast AR market.
The Bren 2 platform is designed with modularity in mind. Barrels and the forend can be swapped to different lengths and configurations, and the entire rear plate assembly can be swapped for factory folding or adjustable stocks if you choose to SBR the platform.
The Bren 2 MS comes with a flush rear plate designed to accept AR-style buffer tubes. You can attach an arm brace, cheek rest, or similar pistol stabilizing device to it. Conversion to a full stock requires a carbine buffer tube and factory stock assembly, or a complete replacement rear plate with integrated folding stock.
The charging handle is swappable from side to side and serves double duty as a forward assist. It stows in the forward position until needed, so it can be repositioned to suit left or right-hand shooters.
SKU: 126821125 • Width: 11.6in • Height: 4in • Depth: 38in • Weight: 11.75oz
Availability: In Stock
The CZ Bren 2 MS pistol in 5.56x45mm represents a clean-sheet redesign of the proven Bren platform, bringing modern engineering and AR-platform familiarity to a compact, modular package. Built around a trimmed aluminum receiver and carbon-fiber-reinforced polymer lower, this 14-inch barreled pistol cuts weight without compromising the durability that's made CZ a trusted name in military and civilian service. If you're looking for a modern pistol-caliber alternative to the AR-9, or you want a highly adaptable 5.56 pistol with genuine Czech engineering, the Bren 2 MS rewards shooters who appreciate thoughtful design over marketing hype.
The Bren 2 MS borrows heavily from AR ergonomics—intentionally. You'll find an AR-style bolt catch on both sides of the platform, plus dual magazine releases and an ambidextrous safety in familiar locations. The non-reciprocating charging handle stows forward and doubles as a forward assist, staying out of your way until you need it. Feed reliability is baked in: the 14-inch cold hammer-forged barrel pairs with proven AR-15 magazines (30-round capacity), so ammunition logistics are straightforward. Folding adjustable sights keep the top rail clean for optics.
The modular forend and barrel-swap capability mean you're not locked into one configuration. The pistol comes set up with a flush rear plate that accepts AR-style buffer tubes, so mounting an arm brace or stabilizing device is plug-and-play if that's your intended setup. Those planning an SBR conversion will find factory stocks and carbine buffer tubes available to complete that path. Stippled grips and a 5.86-pound weight balance make it manageable in close quarters and in vehicle carry scenarios, whether you're a competitive shooter, home defender, or overlander prioritizing practical firepower.
| Caliber | .223/5.56x45mm NATO |
| Barrel Length | 14.17 inches |
| Barrel Type | Cold hammer-forged |
| Magazine Capacity | 30 rounds |
| Magazine Compatibility | AR-15/M16 standard |
| Receiver | Aluminum with carbon-fiber-reinforced polymer lower |
| Safety | Ambidextrous manual safety |
| Sights | Folding adjustable |
| Grip | Stippled |
| Weight | 5.86 lbs |
| Overall Length | 25.8 inches |
| Finish | Black |
| Model | 91452 |
Yes. The 5.56x45mm Bren 2 MS uses AR-15/M16 standard magazines with a 30-round capacity, so magazine availability and cost are on par with the vast AR market.
The Bren 2 platform is designed with modularity in mind. Barrels and the forend can be swapped to different lengths and configurations, and the entire rear plate assembly can be swapped for factory folding or adjustable stocks if you choose to SBR the platform.
The Bren 2 MS comes with a flush rear plate designed to accept AR-style buffer tubes. You can attach an arm brace, cheek rest, or similar pistol stabilizing device to it. Conversion to a full stock requires a carbine buffer tube and factory stock assembly, or a complete replacement rear plate with integrated folding stock.
The charging handle is swappable from side to side and serves double duty as a forward assist. It stows in the forward position until needed, so it can be repositioned to suit left or right-hand shooters.
SKU: 126821125 • Width: 11.6in • Height: 4in • Depth: 38in • Weight: 11.75oz