Cylinder & Slide167526787
Cylinder & Slide Tactical Ii Trigger Pull Kit$122.05
Availability: In Stock
Current Stock: Out of stock
The Cylinder & Slide Tactical Match Kit is a complete trigger group upgrade for Series 70-style 1911 pistols, engineered for shooters who want a crisp, controllable trigger pull without the guesswork of hand-fitting. This kit delivers a 4.5 lb. pull weight—ideal for carry guns where you need a clean break for accuracy but heavier springs for safety and reliability. Every component is precision-manufactured and pre-matched, so it drops in with minimal to no fitting required.
Cylinder & Slide's manufacturing process is built on the principle that match-grade triggers don't have to be expensive or time-consuming to install. Parts are wire EDM cut from bar stock, then honed, polished, and heat-treated to withstand years of hard use. The sear geometry is mechanically correct—sear nose angle, spring weights, and disconnector profile are all dialed in from the factory. This means you're not gambling on compatibility or spending hours at the bench with stones and feeler gauges.
The Tactical Match Kit includes a tactical-profile hammer with properly relieved edges to minimize slide drag and wear on clothing or gear—a detail that matters if this gun rides in a holster daily. The light pull sear spring works in concert with the 18 lb. hammer spring to achieve that 4.5 lb. pull while maintaining positive ignition under any conditions. It's the same philosophy Cylinder & Slide applies to their top competition triggers, scaled down for the carry shooter who won't accept a hair trigger but refuses a mushy, unsafe pull either.
Whether you're upgrading a duty carry gun, a bedside 1911, or a range gun that sees regular defensive use, this kit gives you a professional-quality trigger that you can trust without modification or fitting expertise.
| Product Name | Tactical Match Kit |
| Brand | Cylinder & Slide |
| Trigger Pull Weight | 4.5 lb. |
| Compatibility | Series 70-style 1911 frames |
| Components Included | Hammer, sear, disconnector, sear spring, hammer spring |
| Hammer Spring Weight | 18 lb. |
| Manufacturing Process | Wire EDM cut, honed, polished, heat-treated |
The Tactical Match Kit is designed for Series 70-style 1911 frames. Series 70 is the original GI specification, used on Colts and most other mainstream 1911 platforms. If you have a Series 80 (which includes a firing pin safety), this kit is not compatible. Check your frame type before ordering.
Yes. A 4.5 lb. pull is well within safe limits for duty and carry pistols. The kit includes an 18 lb. hammer spring that ensures positive, reliable ignition under all conditions. The pull is light enough to give you a clean, controllable break, but heavy enough that accidental discharge from holster contact or fumbling is not a realistic concern. This is standard carry trigger territory.
Cylinder & Slide tests every kit on a Series 70-style frame to confirm it will produce the specified pull weight with little or no fitting. All profiles and through-holes are mechanically correct. That said, individual frame variations can occur, and some shooters prefer to hand-fit for an even tighter feel. But out of the box, this kit is designed to drop in and run.
The Tactical Match Kit includes a hammer, sear, disconnector, sear spring, and hammer spring—everything you need to replace the trigger group. You do not need to source additional springs or parts separately.
SKU: 167528493 • Weight: 0.25oz
Availability: In Stock
Current Stock: Out of stock
The Cylinder & Slide Tactical Match Kit is a complete trigger group upgrade for Series 70-style 1911 pistols, engineered for shooters who want a crisp, controllable trigger pull without the guesswork of hand-fitting. This kit delivers a 4.5 lb. pull weight—ideal for carry guns where you need a clean break for accuracy but heavier springs for safety and reliability. Every component is precision-manufactured and pre-matched, so it drops in with minimal to no fitting required.
Cylinder & Slide's manufacturing process is built on the principle that match-grade triggers don't have to be expensive or time-consuming to install. Parts are wire EDM cut from bar stock, then honed, polished, and heat-treated to withstand years of hard use. The sear geometry is mechanically correct—sear nose angle, spring weights, and disconnector profile are all dialed in from the factory. This means you're not gambling on compatibility or spending hours at the bench with stones and feeler gauges.
The Tactical Match Kit includes a tactical-profile hammer with properly relieved edges to minimize slide drag and wear on clothing or gear—a detail that matters if this gun rides in a holster daily. The light pull sear spring works in concert with the 18 lb. hammer spring to achieve that 4.5 lb. pull while maintaining positive ignition under any conditions. It's the same philosophy Cylinder & Slide applies to their top competition triggers, scaled down for the carry shooter who won't accept a hair trigger but refuses a mushy, unsafe pull either.
Whether you're upgrading a duty carry gun, a bedside 1911, or a range gun that sees regular defensive use, this kit gives you a professional-quality trigger that you can trust without modification or fitting expertise.
| Product Name | Tactical Match Kit |
| Brand | Cylinder & Slide |
| Trigger Pull Weight | 4.5 lb. |
| Compatibility | Series 70-style 1911 frames |
| Components Included | Hammer, sear, disconnector, sear spring, hammer spring |
| Hammer Spring Weight | 18 lb. |
| Manufacturing Process | Wire EDM cut, honed, polished, heat-treated |
The Tactical Match Kit is designed for Series 70-style 1911 frames. Series 70 is the original GI specification, used on Colts and most other mainstream 1911 platforms. If you have a Series 80 (which includes a firing pin safety), this kit is not compatible. Check your frame type before ordering.
Yes. A 4.5 lb. pull is well within safe limits for duty and carry pistols. The kit includes an 18 lb. hammer spring that ensures positive, reliable ignition under all conditions. The pull is light enough to give you a clean, controllable break, but heavy enough that accidental discharge from holster contact or fumbling is not a realistic concern. This is standard carry trigger territory.
Cylinder & Slide tests every kit on a Series 70-style frame to confirm it will produce the specified pull weight with little or no fitting. All profiles and through-holes are mechanically correct. That said, individual frame variations can occur, and some shooters prefer to hand-fit for an even tighter feel. But out of the box, this kit is designed to drop in and run.
The Tactical Match Kit includes a hammer, sear, disconnector, sear spring, and hammer spring—everything you need to replace the trigger group. You do not need to source additional springs or parts separately.
SKU: 167528493 • Weight: 0.25oz