Availability: In Stock
The CVA Accura Northwest MR-X is a 50-caliber muzzleloader built for hunters in regions with strict regulations on ignition type and sighting systems. This rifle meets the requirements of states like Washington that mandate musket cap ignition and iron sights, eliminating the common workarounds that many other in-line rifles rely on. If you're hunting in a jurisdiction that enforces these rules, the Northwest designation means you're buying a rifle that's compliant out of the box—no modifications, no guesswork on legality.
Built around a 26-inch Bergara barrel with a 1:28 twist and fluted 416 stainless steel construction, the Accura MR-X delivers the accuracy hunters expect from a modern muzzleloader. The barrel is threaded for attachments and treated internally with Nitride and externally with Tungsten Cerakote—dual-layer protection that resists corrosion in wet mountain conditions. Drilled and tapped for scope mounts (where legal in your area), it ships ready for whatever optic setup your regulations allow. The receiver itself is also drilled and tapped, giving you mounting flexibility if your hunting rules permit scoped hunting.
The adjustable synthetic stock features an X-Treme comb for precise cheek weld and comes in Veil Alpine or OD Green camo patterns. It's genuinely comfortable to shoulder, ambidextrous by design, and light enough for mountain hunting—expect around 6.7 to 7.8 pounds depending on configuration. The carbon-fiber collapsible PalmSaver ramrod stows without an under-barrel rod, keeping the barrel free-floated for consistent accuracy. A fully adjustable trigger (3 to 4.75 pound pull range), included CrushZone recoil pad, and Quake Claw sling round out the package.
The Accura Northwest comes with Williams fiber-optic front and peep rear sights—capable iron sights suitable for hunting distance. Before you buy, verify your state's exact muzzleloader regulations; requirements vary, and compliance depends on your specific hunting zone and season.
| Caliber | .50 Magnum |
| Barrel Length | 26 inches |
| Barrel Material | 416 Stainless Steel, Fluted |
| Twist Rate | 1:28 |
| Ignition System | Musket Cap |
| Receiver | Drilled & Tapped |
| Finish | Tungsten Cerakote (exterior), Nitride (interior) |
| Stock | Ambidextrous Synthetic with Adjustable X-Treme Comb |
| Stock Pattern | Veil Alpine or OD Green Camo |
| Weight | Approximately 6.7–7.8 lbs (configuration dependent) |
| Overall Length | Approximately 41–44 inches |
| Length of Pull | 14.5 inches |
| Front Sight | Williams Fiber-Optic |
| Rear Sight | Williams Peep |
| Trigger | Fully Adjustable (3–4.75 lb pull) |
| Ramrod | Carbon-Fiber Collapsible PalmSaver (no under-barrel) |
| Included Accessories | CrushZone Recoil Pad, Quake Claw Sling |
| Warranty | Manufacturer Lifetime |
The Northwest model is designed to comply with stricter state regulations that require musket cap ignition and iron sights (no scopes). However, regulations vary by state, region, and hunting season. Before purchasing, confirm your local muzzleloader rules with your fish and wildlife agency. Compliance is your responsibility, and rules can differ even within a state.
The receiver is drilled and tapped for scope mounting, but whether you can legally hunt with a scope depends entirely on your state and hunting zone regulations. The Accura Northwest comes equipped with capable Williams iron sights. Check your local regulations before mounting any optic.
The adjustable comb raises or lowers your cheek weld position, helping you achieve the proper sight picture with your sights or scope (if legal in your area). This is especially useful when switching between different sight setups or helping multiple shooters find a comfortable, consistent head position on the stock.
A carbon-fiber collapsible PalmSaver ramrod is included. It stows without an under-barrel tube, keeping the barrel free-floated for better accuracy. The no-ramrod-under-barrel design is cleaner and helps reduce vibration.
SKU: 194197209 • Width: 12.4in • Height: 2.8in • Depth: 33.9in • Weight: 10.12oz
Availability: In Stock
The CVA Accura Northwest MR-X is a 50-caliber muzzleloader built for hunters in regions with strict regulations on ignition type and sighting systems. This rifle meets the requirements of states like Washington that mandate musket cap ignition and iron sights, eliminating the common workarounds that many other in-line rifles rely on. If you're hunting in a jurisdiction that enforces these rules, the Northwest designation means you're buying a rifle that's compliant out of the box—no modifications, no guesswork on legality.
Built around a 26-inch Bergara barrel with a 1:28 twist and fluted 416 stainless steel construction, the Accura MR-X delivers the accuracy hunters expect from a modern muzzleloader. The barrel is threaded for attachments and treated internally with Nitride and externally with Tungsten Cerakote—dual-layer protection that resists corrosion in wet mountain conditions. Drilled and tapped for scope mounts (where legal in your area), it ships ready for whatever optic setup your regulations allow. The receiver itself is also drilled and tapped, giving you mounting flexibility if your hunting rules permit scoped hunting.
The adjustable synthetic stock features an X-Treme comb for precise cheek weld and comes in Veil Alpine or OD Green camo patterns. It's genuinely comfortable to shoulder, ambidextrous by design, and light enough for mountain hunting—expect around 6.7 to 7.8 pounds depending on configuration. The carbon-fiber collapsible PalmSaver ramrod stows without an under-barrel rod, keeping the barrel free-floated for consistent accuracy. A fully adjustable trigger (3 to 4.75 pound pull range), included CrushZone recoil pad, and Quake Claw sling round out the package.
The Accura Northwest comes with Williams fiber-optic front and peep rear sights—capable iron sights suitable for hunting distance. Before you buy, verify your state's exact muzzleloader regulations; requirements vary, and compliance depends on your specific hunting zone and season.
| Caliber | .50 Magnum |
| Barrel Length | 26 inches |
| Barrel Material | 416 Stainless Steel, Fluted |
| Twist Rate | 1:28 |
| Ignition System | Musket Cap |
| Receiver | Drilled & Tapped |
| Finish | Tungsten Cerakote (exterior), Nitride (interior) |
| Stock | Ambidextrous Synthetic with Adjustable X-Treme Comb |
| Stock Pattern | Veil Alpine or OD Green Camo |
| Weight | Approximately 6.7–7.8 lbs (configuration dependent) |
| Overall Length | Approximately 41–44 inches |
| Length of Pull | 14.5 inches |
| Front Sight | Williams Fiber-Optic |
| Rear Sight | Williams Peep |
| Trigger | Fully Adjustable (3–4.75 lb pull) |
| Ramrod | Carbon-Fiber Collapsible PalmSaver (no under-barrel) |
| Included Accessories | CrushZone Recoil Pad, Quake Claw Sling |
| Warranty | Manufacturer Lifetime |
The Northwest model is designed to comply with stricter state regulations that require musket cap ignition and iron sights (no scopes). However, regulations vary by state, region, and hunting season. Before purchasing, confirm your local muzzleloader rules with your fish and wildlife agency. Compliance is your responsibility, and rules can differ even within a state.
The receiver is drilled and tapped for scope mounting, but whether you can legally hunt with a scope depends entirely on your state and hunting zone regulations. The Accura Northwest comes equipped with capable Williams iron sights. Check your local regulations before mounting any optic.
The adjustable comb raises or lowers your cheek weld position, helping you achieve the proper sight picture with your sights or scope (if legal in your area). This is especially useful when switching between different sight setups or helping multiple shooters find a comfortable, consistent head position on the stock.
A carbon-fiber collapsible PalmSaver ramrod is included. It stows without an under-barrel tube, keeping the barrel free-floated for better accuracy. The no-ramrod-under-barrel design is cleaner and helps reduce vibration.
SKU: 194197209 • Width: 12.4in • Height: 2.8in • Depth: 33.9in • Weight: 10.12oz