Crimson Trace115802519
Crimson Trace LG497 Laserguard 5mW Red Laser (633nm) with 50 ft Range, Black Finish for Ruger LCP II$186.95
Availability: In Stock
The Crimson Trace LG497G Laserguard is a compact green laser sight purpose-built for the Ruger LCP II, delivering fast target acquisition without adding bulk to your everyday carry or backup defensive gun. Unlike traditional iron sights that require precise alignment under stress, this 5mW green laser projects a visible aiming point at 50 feet, cutting through the gap between sight picture and shot placement when seconds matter. The green wavelength (532nM) is naturally easier for the human eye to track than red, especially in varied lighting—a genuine advantage for concealed carry and close-quarters defensive scenarios.
Installation takes minutes with no gunsmithing: the laserguard clamps around the trigger guard of your LCP II, and the included adjustment tool lets you dial in windage and elevation from the factory 50-foot zero. The front activation button engages the laser when you establish your normal firing grip—Crimson Trace calls this Instinctive Activation, and it means the laser fires only when you intend to shoot. A single 1/3N lithium battery powers the unit for over four hours of continuous use, so you're not constantly replacing cells if you run drills or carry it regularly.
Built from reinforced polymer with a rubber overmold for durability and grip, the black finish blends with your LCP II's profile. The 0.50-inch dot at 50 feet is small enough for precise aiming yet bright enough to pick up in daylight. This is a purpose-built accessory for a specific carry gun—no universal mounting headaches, no compatibility guessing.
| Brand | Crimson Trace |
| Model | LG497G Laserguard |
| Laser Power | 5mW |
| Wavelength | 532nM (green) |
| Effective Range | 50 feet |
| Dot Size @ 50 ft | Approximately 0.50 inch |
| Fit | Ruger LCP II (trigger guard mount) |
| Attachment Method | Trigger guard clamp |
| Activation | Front pressure button (Instinctive Activation) |
| Battery Type | One 1/3N Lithium |
| Battery Life | Over 4 hours continuous |
| Adjustment | User adjustable windage and elevation |
| Material | Polymer with rubber overmold |
| Finish | Black |
| Installation | User installed, no modifications required |
| Adjustment Tool | Included (wrench size 0.05) |
Yes—this laserguard is designed specifically for the Ruger LCP II and clamps onto the trigger guard. No modifications to the firearm are needed, and installation is quick and user-friendly.
The green wavelength (532nM) is naturally brighter and easier for the human eye to track than red, particularly in daylight or variable lighting. For a small carry gun where you may need fast target confirmation, this is a genuine advantage.
The laserguard comes with an adjustment tool (0.05 wrench size) for windage and elevation tuning, and it ships factory sighted at 50 feet. You'll need to supply one 1/3N lithium battery to power it. No gunsmithing or additional tools are required for installation.
A single 1/3N lithium battery provides over four hours of continuous runtime. If you use the laser intermittently or rely on Instinctive Activation (firing grip only), battery life extends further between replacements.
SKU: 115749326 • Width: 5.1in • Height: 2.2in • Depth: 5.2in • Weight: 0.25oz
Availability: In Stock
The Crimson Trace LG497G Laserguard is a compact green laser sight purpose-built for the Ruger LCP II, delivering fast target acquisition without adding bulk to your everyday carry or backup defensive gun. Unlike traditional iron sights that require precise alignment under stress, this 5mW green laser projects a visible aiming point at 50 feet, cutting through the gap between sight picture and shot placement when seconds matter. The green wavelength (532nM) is naturally easier for the human eye to track than red, especially in varied lighting—a genuine advantage for concealed carry and close-quarters defensive scenarios.
Installation takes minutes with no gunsmithing: the laserguard clamps around the trigger guard of your LCP II, and the included adjustment tool lets you dial in windage and elevation from the factory 50-foot zero. The front activation button engages the laser when you establish your normal firing grip—Crimson Trace calls this Instinctive Activation, and it means the laser fires only when you intend to shoot. A single 1/3N lithium battery powers the unit for over four hours of continuous use, so you're not constantly replacing cells if you run drills or carry it regularly.
Built from reinforced polymer with a rubber overmold for durability and grip, the black finish blends with your LCP II's profile. The 0.50-inch dot at 50 feet is small enough for precise aiming yet bright enough to pick up in daylight. This is a purpose-built accessory for a specific carry gun—no universal mounting headaches, no compatibility guessing.
| Brand | Crimson Trace |
| Model | LG497G Laserguard |
| Laser Power | 5mW |
| Wavelength | 532nM (green) |
| Effective Range | 50 feet |
| Dot Size @ 50 ft | Approximately 0.50 inch |
| Fit | Ruger LCP II (trigger guard mount) |
| Attachment Method | Trigger guard clamp |
| Activation | Front pressure button (Instinctive Activation) |
| Battery Type | One 1/3N Lithium |
| Battery Life | Over 4 hours continuous |
| Adjustment | User adjustable windage and elevation |
| Material | Polymer with rubber overmold |
| Finish | Black |
| Installation | User installed, no modifications required |
| Adjustment Tool | Included (wrench size 0.05) |
Yes—this laserguard is designed specifically for the Ruger LCP II and clamps onto the trigger guard. No modifications to the firearm are needed, and installation is quick and user-friendly.
The green wavelength (532nM) is naturally brighter and easier for the human eye to track than red, particularly in daylight or variable lighting. For a small carry gun where you may need fast target confirmation, this is a genuine advantage.
The laserguard comes with an adjustment tool (0.05 wrench size) for windage and elevation tuning, and it ships factory sighted at 50 feet. You'll need to supply one 1/3N lithium battery to power it. No gunsmithing or additional tools are required for installation.
A single 1/3N lithium battery provides over four hours of continuous runtime. If you use the laser intermittently or rely on Instinctive Activation (firing grip only), battery life extends further between replacements.
SKU: 115749326 • Width: 5.1in • Height: 2.2in • Depth: 5.2in • Weight: 0.25oz