Crimson Trace115814334
Crimson Trace LG409 Lasergrips 5mW Red Laser, 633nm Wavelength, Black Finish for Kimber Micro 9mm Luger$285.95
Availability: In Stock
The Crimson Trace LG409G Lasergrips bring green laser aiming to the Kimber Micro 9, one of the sleekest 9mm carry guns on the market. These replace your factory grips entirely—they're not an add-on or rail-mounted system. The LG409G is purpose-built for the Micro line, fitting the compact profile without bulk. A 5mW green laser at 532nm wavelength projects a visible aiming point that many shooters find faster and more intuitive than iron sights alone, especially in low light or under stress. Activation is simple: press the rubber overmold pad on the front of the grip, and the laser comes on. Factory sighted at 50 feet, the laser prints a half-inch group at that distance—tight enough for accurate shot placement on threat-sized targets. Installation takes minutes and requires no gunsmithing; they swap in like any grip panel set.
Green lasers cut through ambient light better than red, making them a solid choice for defensive use where you might engage in varying light conditions. The durable polymer construction resists wear, and the black finish matches the Micro's aesthetic. These grips give you a proven aiming reference point that supplements your defensive fundamentals—sight picture, trigger control, and accuracy still matter most, but the laser gives you one more tool to keep rounds on target when it counts.
If you carry a Kimber Micro 9 and want to upgrade your sighting capability without adding external hardware, Lasergrips deliver a clean, integrated solution. They're also popular for shooters who want faster target acquisition at close range or who benefit from the visual feedback a laser provides during training.
| Laser Type | Green (532nm) |
| Power Output | 5mW |
| Firearm Compatibility | Kimber Micro 9 (9mm Luger) |
| Activation Method | Pressure pad (front grip) |
| Factory Sight-In Distance | 50 feet |
| Laser Group Diameter at 50 Feet | 0.5 inch |
| Material | Durable polymer with rubber overmold |
| Finish | Black |
| Installation | User-installed; replaces factory grips |
Yes, the LG409G is specifically designed for Kimber Micro 9 (9mm Luger) handguns. These grips replace your factory grip panels.
The laser activates by pressing the rubber overmold pressure pad on the front of the grip. Release pressure to deactivate. This design keeps the laser off until you consciously grip the gun in a shooting position.
Green lasers (532nm wavelength) generally cut through ambient light and are more visible in bright conditions or daylight compared to red. The LG409G's 5mW green laser provides reliable target designation in variable lighting.
No. The LG409G is user-installable in minutes. They work like standard grip replacement—no special tools or modifications needed.
SKU: 115658358 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.25oz
Availability: In Stock
The Crimson Trace LG409G Lasergrips bring green laser aiming to the Kimber Micro 9, one of the sleekest 9mm carry guns on the market. These replace your factory grips entirely—they're not an add-on or rail-mounted system. The LG409G is purpose-built for the Micro line, fitting the compact profile without bulk. A 5mW green laser at 532nm wavelength projects a visible aiming point that many shooters find faster and more intuitive than iron sights alone, especially in low light or under stress. Activation is simple: press the rubber overmold pad on the front of the grip, and the laser comes on. Factory sighted at 50 feet, the laser prints a half-inch group at that distance—tight enough for accurate shot placement on threat-sized targets. Installation takes minutes and requires no gunsmithing; they swap in like any grip panel set.
Green lasers cut through ambient light better than red, making them a solid choice for defensive use where you might engage in varying light conditions. The durable polymer construction resists wear, and the black finish matches the Micro's aesthetic. These grips give you a proven aiming reference point that supplements your defensive fundamentals—sight picture, trigger control, and accuracy still matter most, but the laser gives you one more tool to keep rounds on target when it counts.
If you carry a Kimber Micro 9 and want to upgrade your sighting capability without adding external hardware, Lasergrips deliver a clean, integrated solution. They're also popular for shooters who want faster target acquisition at close range or who benefit from the visual feedback a laser provides during training.
| Laser Type | Green (532nm) |
| Power Output | 5mW |
| Firearm Compatibility | Kimber Micro 9 (9mm Luger) |
| Activation Method | Pressure pad (front grip) |
| Factory Sight-In Distance | 50 feet |
| Laser Group Diameter at 50 Feet | 0.5 inch |
| Material | Durable polymer with rubber overmold |
| Finish | Black |
| Installation | User-installed; replaces factory grips |
Yes, the LG409G is specifically designed for Kimber Micro 9 (9mm Luger) handguns. These grips replace your factory grip panels.
The laser activates by pressing the rubber overmold pressure pad on the front of the grip. Release pressure to deactivate. This design keeps the laser off until you consciously grip the gun in a shooting position.
Green lasers (532nm wavelength) generally cut through ambient light and are more visible in bright conditions or daylight compared to red. The LG409G's 5mW green laser provides reliable target designation in variable lighting.
No. The LG409G is user-installable in minutes. They work like standard grip replacement—no special tools or modifications needed.
SKU: 115658358 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.25oz