Crimson Trace115654213
Crimson Trace LG185 Lasergrips 5mW Red Laser with 633nm Wavelength, Black Finish for Taurus Small Frame Revolver$186.95
Availability: In Stock
The Crimson Trace LG375 Lasergrips bring modern targeting precision to your Taurus Judge or Tracker revolver. These grip-mounted laser sights transform the naturally instinctive point-and-shoot characteristics of your wheelgun into a platform with repeatable accuracy. When you wrap your hand around the grip in your natural firing position, the pressure-activated laser springs to life—no fumbling with buttons or switches when seconds count. Whether you're at the range refining your groups or in the field relying on your Judge's versatility across .45 Long Colt and .410 shotshell loads, having a visible aiming reference eliminates the gap between where you're looking and where you're hitting.
The 5mW red laser at 633nM wavelength is bright enough to see in varied lighting conditions without being so powerful that it complicates safe handling. Crimson Trace factory-sighted these grips at 50 feet, delivering a 0.5-inch dot diameter at that distance—tight enough for precision work, visible enough to acquire your target naturally. The black grip finish blends seamlessly with most Judge and Tracker models, maintaining the revolver's lines while adding serious capability.
Installation is straightforward: these grips replace your factory grips, with no gunsmithing required. Once installed, the laser is ready to work. No batteries to fiddle with before heading out, no complex zeroing process. Just grip, press, and shoot. For Judge enthusiasts who want better hit probability without changing their manual of arms, the LG375 closes the gap between point shooting and precision aiming.
| Laser Type | Red laser |
| Wavelength | 633nM |
| Power Output | 5mW |
| Activation Method | Pressure activation (grip-squeeze) |
| Factory Zero Distance | 50 feet |
| Dot Diameter at 50ft | 0.5 inch |
| Finish | Black |
| Compatibility | Taurus Judge, Taurus Tracker (excludes Tracker 991 and Public Defender) |
| Installation | Grip replacement (no gunsmithing) |
Yes, the LG375 is designed for Taurus Judge and Tracker revolvers. However, these grips do not fit the Tracker 991 or Public Defender models, so verify your revolver's exact model before ordering.
The laser uses pressure activation built into the grips. When you hold the revolver in your natural firing grip, the pressure from your hand triggers the laser. You don't need to press a separate button or switch—it's automatic and intuitive.
No. The LG375 Lasergrips are a direct grip replacement and require no gunsmithing or special tools. Installation is a straightforward swap of your factory grips.
Crimson Trace has pre-sighted these grips at 50 feet, where the laser dot measures 0.5 inches in diameter. This gives you a reliable zero point out of the box, though you may fine-tune it further based on your specific revolver and shooting distances.
SKU: 115780570 • Width: 5.3in • Height: 3in • Depth: 5.3in • Weight: 0.38oz
Availability: In Stock
The Crimson Trace LG375 Lasergrips bring modern targeting precision to your Taurus Judge or Tracker revolver. These grip-mounted laser sights transform the naturally instinctive point-and-shoot characteristics of your wheelgun into a platform with repeatable accuracy. When you wrap your hand around the grip in your natural firing position, the pressure-activated laser springs to life—no fumbling with buttons or switches when seconds count. Whether you're at the range refining your groups or in the field relying on your Judge's versatility across .45 Long Colt and .410 shotshell loads, having a visible aiming reference eliminates the gap between where you're looking and where you're hitting.
The 5mW red laser at 633nM wavelength is bright enough to see in varied lighting conditions without being so powerful that it complicates safe handling. Crimson Trace factory-sighted these grips at 50 feet, delivering a 0.5-inch dot diameter at that distance—tight enough for precision work, visible enough to acquire your target naturally. The black grip finish blends seamlessly with most Judge and Tracker models, maintaining the revolver's lines while adding serious capability.
Installation is straightforward: these grips replace your factory grips, with no gunsmithing required. Once installed, the laser is ready to work. No batteries to fiddle with before heading out, no complex zeroing process. Just grip, press, and shoot. For Judge enthusiasts who want better hit probability without changing their manual of arms, the LG375 closes the gap between point shooting and precision aiming.
| Laser Type | Red laser |
| Wavelength | 633nM |
| Power Output | 5mW |
| Activation Method | Pressure activation (grip-squeeze) |
| Factory Zero Distance | 50 feet |
| Dot Diameter at 50ft | 0.5 inch |
| Finish | Black |
| Compatibility | Taurus Judge, Taurus Tracker (excludes Tracker 991 and Public Defender) |
| Installation | Grip replacement (no gunsmithing) |
Yes, the LG375 is designed for Taurus Judge and Tracker revolvers. However, these grips do not fit the Tracker 991 or Public Defender models, so verify your revolver's exact model before ordering.
The laser uses pressure activation built into the grips. When you hold the revolver in your natural firing grip, the pressure from your hand triggers the laser. You don't need to press a separate button or switch—it's automatic and intuitive.
No. The LG375 Lasergrips are a direct grip replacement and require no gunsmithing or special tools. Installation is a straightforward swap of your factory grips.
Crimson Trace has pre-sighted these grips at 50 feet, where the laser dot measures 0.5 inches in diameter. This gives you a reliable zero point out of the box, though you may fine-tune it further based on your specific revolver and shooting distances.
SKU: 115780570 • Width: 5.3in • Height: 3in • Depth: 5.3in • Weight: 0.38oz