Crimson Trace115666963
Crimson Trace LG303 Lasergrips - 5mW Red Laser, 633nm Wavelength, 50ft Range, Black Finish for Ruger SP101$299.95
Availability: In Stock
The Crimson Trace LG-111 Lasergrips are a purpose-built laser sight solution for your Ruger SP101 revolver. These grips replace your factory grips and integrate a red laser directly into the ergonomic frame, giving you a rapid-acquisition aiming tool that's always there when you need it—no additional mounting, no learning curve. Built from hard polymer with a smooth finish, they're tough enough for daily carry while maintaining a snag-free draw. Whether you're running your SP101 for home defense, backup duty, or sport shooting, the LG-111 puts a proven red-dot advantage in your hands without changing the gun's profile or handling.
Pressure activation means your laser comes on when you grip the gun naturally—no fumbling for buttons in low-light or high-stress situations. The laser is factory sighted at 50 feet and prints a tight 0.5-inch dot at that distance, giving you the precision and speed to put rounds downrange fast. The 5mW red laser (633nM wavelength) is bright enough in most indoor and outdoor conditions without drawing unnecessary attention, and it works reliably across the temperature ranges you'll encounter in real-world use.
These grips are a legitimate force multiplier for revolver shooters who want faster sight acquisition without adding bulk or weight to the gun. Install them once, and you're ready to run your SP101 with a modern advantage that fits the gun's classic profile and handling.
| Product | Crimson Trace LG-111 Lasergrips |
| Caliber / Platform | Ruger SP101 revolver |
| Laser Type | Red (633nM) |
| Laser Power | 5mW |
| Activation | Pressure (grip-activated) |
| Factory Zero Distance | 50 feet |
| Dot Diameter @ 50 ft | 0.5 inch |
| Material | Hard polymer |
| Finish | Black |
Yes. The LG-111 is designed as a direct grip replacement for the Ruger SP101 and installs in place of the factory grips.
The LG-111 uses pressure activation. The laser turns on when you grip the gun naturally, making it intuitive for both defensive and sport shooting use—no buttons to find or activate separately.
They're factory sighted at 50 feet and produce a 0.5-inch dot diameter at that distance.
Yes. The grips have a smooth surface designed for snag-free draws, making them suitable for carry revolvers. The laser adds a targeting advantage without changing the gun's profile or weight noticeably.
SKU: 115813376 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.31oz
Availability: In Stock
The Crimson Trace LG-111 Lasergrips are a purpose-built laser sight solution for your Ruger SP101 revolver. These grips replace your factory grips and integrate a red laser directly into the ergonomic frame, giving you a rapid-acquisition aiming tool that's always there when you need it—no additional mounting, no learning curve. Built from hard polymer with a smooth finish, they're tough enough for daily carry while maintaining a snag-free draw. Whether you're running your SP101 for home defense, backup duty, or sport shooting, the LG-111 puts a proven red-dot advantage in your hands without changing the gun's profile or handling.
Pressure activation means your laser comes on when you grip the gun naturally—no fumbling for buttons in low-light or high-stress situations. The laser is factory sighted at 50 feet and prints a tight 0.5-inch dot at that distance, giving you the precision and speed to put rounds downrange fast. The 5mW red laser (633nM wavelength) is bright enough in most indoor and outdoor conditions without drawing unnecessary attention, and it works reliably across the temperature ranges you'll encounter in real-world use.
These grips are a legitimate force multiplier for revolver shooters who want faster sight acquisition without adding bulk or weight to the gun. Install them once, and you're ready to run your SP101 with a modern advantage that fits the gun's classic profile and handling.
| Product | Crimson Trace LG-111 Lasergrips |
| Caliber / Platform | Ruger SP101 revolver |
| Laser Type | Red (633nM) |
| Laser Power | 5mW |
| Activation | Pressure (grip-activated) |
| Factory Zero Distance | 50 feet |
| Dot Diameter @ 50 ft | 0.5 inch |
| Material | Hard polymer |
| Finish | Black |
Yes. The LG-111 is designed as a direct grip replacement for the Ruger SP101 and installs in place of the factory grips.
The LG-111 uses pressure activation. The laser turns on when you grip the gun naturally, making it intuitive for both defensive and sport shooting use—no buttons to find or activate separately.
They're factory sighted at 50 feet and produce a 0.5-inch dot diameter at that distance.
Yes. The grips have a smooth surface designed for snag-free draws, making them suitable for carry revolvers. The laser adds a targeting advantage without changing the gun's profile or weight noticeably.
SKU: 115813376 • Width: 3.3in • Height: 2.2in • Depth: 5.3in • Weight: 0.31oz