Crimson Trace151180773
Crimson Trace LaserSaddle Laser Sight for Mossberg 500/590 Series & Shockwave Shotguns - Matte Finish DEMO/USED$149.95
Loading...
Loading...
Loading...
Availability: In Stock
The Crimson Trace LaserSaddle laser sight for Mossberg 500/590 and Shockwave shotguns brings fast, intuitive targeting to pump-action 12 and 20 gauge guns. This compact red laser mounts directly to the receiver saddle—no gunsmithing required—and gives you an instantly visible aiming point from contact distance to 50 yards and beyond. Whether you're running home defense drills, hunting in brush, or fine-tuning your tactical shotgun setup, a laser sight cuts through the speed-vs-accuracy tradeoff that traditional bead sights force on you.
The LaserSaddle uses a 5mW red laser—bright enough to see in daylight and low light alike—with multiple pressure-activated buttons positioned for ambidextrous use. You get full windage and elevation adjustment, so zeroing is straightforward. A master on/off switch lets you power down completely between sessions, and two CR2032 batteries keep the sight running for 3 hours of continuous use. The matte black polymer construction blends seamlessly with tactical and traditional shotgun profiles alike.
Installation is user-friendly: the sight saddles onto your shotgun's receiver, provided you have the standard drilled-and-tapped holes. It will not fit .410 bore receivers. Factory sighting is set at 50 feet, and the laser dot prints roughly half an inch at that distance—tight enough for precision and large enough to track your target in low contrast. Backed by Crimson Trace's three-year full warranty, this is a no-fuss optic upgrade for serious shotgunners.
| Brand | Crimson Trace |
| Model | LS-250G LaserSaddle |
| Compatibility | Mossberg 500, 590, and 590 Shockwave (12 gauge and 20 gauge only); receiver must be drilled and tapped |
| Laser Output | 5mW red laser |
| Dot Size at 50 feet | Approximately 0.50 inch |
| Activation | Pressure-activated; ambidextrous controls |
| Adjustment | User-adjustable windage and elevation |
| Power Control | Master on/off switch |
| Battery Type | Two CR2032 batteries (included) |
| Battery Life | 3 hours continuous use |
| Installation | User-installed; no gunsmithing required |
| Material | Polymer |
| Finish | Matte black |
| Warranty | Three-year full warranty |
The LaserSaddle is designed for Mossberg 500, 590, and 590 Shockwave shotguns in 12 gauge and 20 gauge. Your receiver must be drilled and tapped for the saddle mount. It does not fit .410 bore models. Check your receiver before ordering to confirm compatibility.
The sight uses two CR2032 batteries, both included. You'll get approximately 3 hours of continuous laser use per charge. The master on/off switch lets you shut down the sight completely between shooting sessions to extend battery life.
Yes. The LaserSaddle features user-adjustable windage and elevation, so you can zero the laser to your shotgun and specific shooting distance without special tools or a gunsmith. It comes factory sighted at 50 feet and prints a dot roughly 0.50 inches at that distance.
You receive the laser sight, two CR2032 batteries, and all hardware needed for mounting. Installation is user-friendly—the sight saddles onto your receiver saddle without gunsmithing. As long as your receiver is drilled and tapped for the mount, you can have it running in minutes.
SKU: 115810512 • Width: 4in • Height: 2.7in • Depth: 10in • Weight: 0.44oz
Availability: In Stock
The Crimson Trace LaserSaddle laser sight for Mossberg 500/590 and Shockwave shotguns brings fast, intuitive targeting to pump-action 12 and 20 gauge guns. This compact red laser mounts directly to the receiver saddle—no gunsmithing required—and gives you an instantly visible aiming point from contact distance to 50 yards and beyond. Whether you're running home defense drills, hunting in brush, or fine-tuning your tactical shotgun setup, a laser sight cuts through the speed-vs-accuracy tradeoff that traditional bead sights force on you.
The LaserSaddle uses a 5mW red laser—bright enough to see in daylight and low light alike—with multiple pressure-activated buttons positioned for ambidextrous use. You get full windage and elevation adjustment, so zeroing is straightforward. A master on/off switch lets you power down completely between sessions, and two CR2032 batteries keep the sight running for 3 hours of continuous use. The matte black polymer construction blends seamlessly with tactical and traditional shotgun profiles alike.
Installation is user-friendly: the sight saddles onto your shotgun's receiver, provided you have the standard drilled-and-tapped holes. It will not fit .410 bore receivers. Factory sighting is set at 50 feet, and the laser dot prints roughly half an inch at that distance—tight enough for precision and large enough to track your target in low contrast. Backed by Crimson Trace's three-year full warranty, this is a no-fuss optic upgrade for serious shotgunners.
| Brand | Crimson Trace |
| Model | LS-250G LaserSaddle |
| Compatibility | Mossberg 500, 590, and 590 Shockwave (12 gauge and 20 gauge only); receiver must be drilled and tapped |
| Laser Output | 5mW red laser |
| Dot Size at 50 feet | Approximately 0.50 inch |
| Activation | Pressure-activated; ambidextrous controls |
| Adjustment | User-adjustable windage and elevation |
| Power Control | Master on/off switch |
| Battery Type | Two CR2032 batteries (included) |
| Battery Life | 3 hours continuous use |
| Installation | User-installed; no gunsmithing required |
| Material | Polymer |
| Finish | Matte black |
| Warranty | Three-year full warranty |
The LaserSaddle is designed for Mossberg 500, 590, and 590 Shockwave shotguns in 12 gauge and 20 gauge. Your receiver must be drilled and tapped for the saddle mount. It does not fit .410 bore models. Check your receiver before ordering to confirm compatibility.
The sight uses two CR2032 batteries, both included. You'll get approximately 3 hours of continuous laser use per charge. The master on/off switch lets you shut down the sight completely between shooting sessions to extend battery life.
Yes. The LaserSaddle features user-adjustable windage and elevation, so you can zero the laser to your shotgun and specific shooting distance without special tools or a gunsmith. It comes factory sighted at 50 feet and prints a dot roughly 0.50 inches at that distance.
You receive the laser sight, two CR2032 batteries, and all hardware needed for mounting. Installation is user-friendly—the sight saddles onto your receiver saddle without gunsmithing. As long as your receiver is drilled and tapped for the mount, you can have it running in minutes.
SKU: 115810512 • Width: 4in • Height: 2.7in • Depth: 10in • Weight: 0.44oz