$19.94
Loading...
Loading...
Loading...
Availability: In Stock
CorBon Pow'RBall 9mm+P ammunition brings a polymer-tipped hollow point design engineered for consistent, reliable performance in semi-automatic pistols. This 100-grain load uses a patented V-shaped lead cavity beneath a gilded metal jacket, topped with a polymer ball that works on multiple levels: it aids feeding reliability, helps the round cut through air more efficiently in flight, and manages expansion reliably without fouling from fabric or intermediate barriers.
The polymer tip's delayed-engagement design is the trick here. On impact, it lets the bullet penetrate sufficiently before the tip is displaced, which then exposes the V-shaped cavity and triggers controlled, predictable expansion. That matters in defensive scenarios where feeding reliability and expansion consistency can't be left to chance. The +P designation means this is a higher-pressure load—verify your pistol's chamber and barrel are rated for +P ammunition before use.
CorBon Pow'RBall ships in 20-round boxes, and you can stock deeper with case quantities of 500 rounds. Whether you're setting up for carry ammo, duty use, or range practice with a load that mirrors your carry setup, this ammunition is designed to perform when it counts.
| Caliber | 9mm+P |
| Bullet Weight | 100 grains |
| Bullet Type | Polymer-tipped hollow point (Pow'RBall) |
| Box Quantity | 20 rounds |
| Case Quantity | 500 rounds (25 boxes) |
| Jacket Material | Gilding metal |
This is a 9mm+P load, which means it operates at higher pressure than standard 9mm ammunition. Your pistol must be rated for +P ammunition in both the slide and barrel. Check your owner's manual or contact the manufacturer if you're unsure. If your gun is rated for standard 9mm only, do not use +P loads.
The polymer ball manages expansion timing by delaying it slightly during initial penetration, allowing the round to reach adequate depth before the tip is displaced and the V-shaped lead cavity exposes to cause expansion. This helps prevent failures to expand from fabric or other intermediate barriers that might plug a standard hollow point.
CorBon Pow'RBall comes in 20-round boxes. If you're looking to stock deeper, case quantities of 500 rounds (25 boxes per case) are available.
This ammunition is engineered with defensive performance in mind—the design prioritizes reliable feeding, consistent expansion, and barrier-resistant performance. However, always verify that your specific pistol is rated for 9mm+P ammunition before carrying or using any +P load.
SKU: 119713054 • Width: 2.8in • Height: 1.4in • Depth: 2.2in • Weight: 0.56oz
Availability: In Stock
CorBon Pow'RBall 9mm+P ammunition brings a polymer-tipped hollow point design engineered for consistent, reliable performance in semi-automatic pistols. This 100-grain load uses a patented V-shaped lead cavity beneath a gilded metal jacket, topped with a polymer ball that works on multiple levels: it aids feeding reliability, helps the round cut through air more efficiently in flight, and manages expansion reliably without fouling from fabric or intermediate barriers.
The polymer tip's delayed-engagement design is the trick here. On impact, it lets the bullet penetrate sufficiently before the tip is displaced, which then exposes the V-shaped cavity and triggers controlled, predictable expansion. That matters in defensive scenarios where feeding reliability and expansion consistency can't be left to chance. The +P designation means this is a higher-pressure load—verify your pistol's chamber and barrel are rated for +P ammunition before use.
CorBon Pow'RBall ships in 20-round boxes, and you can stock deeper with case quantities of 500 rounds. Whether you're setting up for carry ammo, duty use, or range practice with a load that mirrors your carry setup, this ammunition is designed to perform when it counts.
| Caliber | 9mm+P |
| Bullet Weight | 100 grains |
| Bullet Type | Polymer-tipped hollow point (Pow'RBall) |
| Box Quantity | 20 rounds |
| Case Quantity | 500 rounds (25 boxes) |
| Jacket Material | Gilding metal |
This is a 9mm+P load, which means it operates at higher pressure than standard 9mm ammunition. Your pistol must be rated for +P ammunition in both the slide and barrel. Check your owner's manual or contact the manufacturer if you're unsure. If your gun is rated for standard 9mm only, do not use +P loads.
The polymer ball manages expansion timing by delaying it slightly during initial penetration, allowing the round to reach adequate depth before the tip is displaced and the V-shaped lead cavity exposes to cause expansion. This helps prevent failures to expand from fabric or other intermediate barriers that might plug a standard hollow point.
CorBon Pow'RBall comes in 20-round boxes. If you're looking to stock deeper, case quantities of 500 rounds (25 boxes per case) are available.
This ammunition is engineered with defensive performance in mind—the design prioritizes reliable feeding, consistent expansion, and barrier-resistant performance. However, always verify that your specific pistol is rated for 9mm+P ammunition before carrying or using any +P load.
SKU: 119713054 • Width: 2.8in • Height: 1.4in • Depth: 2.2in • Weight: 0.56oz
