Availability: In Stock
The Colt Cobra 38 Special +P revolver is a modern take on a classic design—a compact, lightweight carry gun built for shooters who value simplicity, reliability, and real-world performance. This 2-inch barreled snubnose chambers the potent .38 Special +P round, holds six rounds, and tips the scales at just 24.6 ounces, making it equally at home in an ankle holster, a jacket pocket, or a bedside drawer. Whether you're new to revolvers or a seasoned shooter looking for a no-nonsense backup or primary carry piece, the Cobra delivers the kind of straightforward dependability that's defined Colt revolvers for over a century.
The gun's construction centers on stainless steel—barrel, cylinder, and frame all finished in matte for a professional, corrosion-resistant build that handles harsh conditions without fussing. The one-piece barrel features a recessed crown and a red fiber optic front sight paired with an integral notch rear sight, providing a combat-ready sight picture that's quick to acquire in low light or fast-moving situations. The double-action/single-action trigger breaks at 7–10 pounds in DA and 3–4 pounds in SA, smooth enough for deliberate marksmanship but stiff enough to prevent negligent discharge—exactly what you want in a carry revolver.
Ergonomics matter when you're betting your life on a gun, and Colt equipped the Cobra with Hogue OverMolded rubber grips featuring finger grooves and high-traction texturing that anchor the gun firmly in your hand even when palms are wet or gloved. The linear leaf mainspring is tuned for long-term durability and consistent performance, minimizing the creep and break-in issues that plague some budget revolvers. At 7 inches overall length and just over an inch wide, this is a gun that disappears in a proper holster.
The Cobra's compact frame, exposed hammer, and proven .38 Special +P power make it a favorite among off-duty law enforcement, armed civilians, and hunters who respect what a snubnose revolver can do. No safeties to fumble, no magazine springs to weaken, no slide to short-stroke—just point, pull, and trust the gun to work every time.
| Caliber | .38 Special +P |
| Capacity | 6 rounds |
| Barrel Length | 2 inches |
| Barrel Rifling | 1:14 LH, 6 groove |
| Overall Length | 7 inches |
| Overall Height | 5 inches |
| Overall Width | 1.4 inches |
| Unloaded Weight | 24.6 ounces |
| Frame Material | Stainless steel |
| Cylinder Material | Stainless steel |
| Barrel Material | Stainless steel |
| Finish | Matte |
| Front Sight | Red fiber optic |
| Rear Sight | Integral notch |
| Trigger Action | Double-action/Single-action |
| Double-Action Trigger Weight | 7–10 pounds |
| Single-Action Trigger Weight | 3–4 pounds |
| Grip | Hogue OverMolded rubber with finger grooves |
Yes. At 24.6 ounces and 7 inches long, the Cobra is designed as a carry-ready snubnose revolver. The compact frame and lightweight build make it easy to conceal, while the stainless steel construction and proven .38 Special +P chambering deliver dependable power without the complexity of a semi-automatic. The Hogue grips and fiber optic front sight add practical ergonomics and sighting speed.
The Cobra is chambered for .38 Special and .38 Special +P. Always verify your specific ammunition is labeled as safe for your firearm and consult the manufacturer's documentation. Do not exceed the pressure rating of your revolver.
Yes, the Cobra features an exposed hammer, allowing both traditional double-action trigger pulls and lighter single-action fire when you manually cock the hammer. The single-action trigger weight is 3–4 pounds, while double-action is 7–10 pounds.
The gun ships with the black Hogue OverMolded rubber grips already installed. Refer to the product documentation or contact Colt directly for details on any additional components or factory documentation included.
SKU: 198467882 • Weight: 3.06oz
Availability: In Stock
The Colt Cobra 38 Special +P revolver is a modern take on a classic design—a compact, lightweight carry gun built for shooters who value simplicity, reliability, and real-world performance. This 2-inch barreled snubnose chambers the potent .38 Special +P round, holds six rounds, and tips the scales at just 24.6 ounces, making it equally at home in an ankle holster, a jacket pocket, or a bedside drawer. Whether you're new to revolvers or a seasoned shooter looking for a no-nonsense backup or primary carry piece, the Cobra delivers the kind of straightforward dependability that's defined Colt revolvers for over a century.
The gun's construction centers on stainless steel—barrel, cylinder, and frame all finished in matte for a professional, corrosion-resistant build that handles harsh conditions without fussing. The one-piece barrel features a recessed crown and a red fiber optic front sight paired with an integral notch rear sight, providing a combat-ready sight picture that's quick to acquire in low light or fast-moving situations. The double-action/single-action trigger breaks at 7–10 pounds in DA and 3–4 pounds in SA, smooth enough for deliberate marksmanship but stiff enough to prevent negligent discharge—exactly what you want in a carry revolver.
Ergonomics matter when you're betting your life on a gun, and Colt equipped the Cobra with Hogue OverMolded rubber grips featuring finger grooves and high-traction texturing that anchor the gun firmly in your hand even when palms are wet or gloved. The linear leaf mainspring is tuned for long-term durability and consistent performance, minimizing the creep and break-in issues that plague some budget revolvers. At 7 inches overall length and just over an inch wide, this is a gun that disappears in a proper holster.
The Cobra's compact frame, exposed hammer, and proven .38 Special +P power make it a favorite among off-duty law enforcement, armed civilians, and hunters who respect what a snubnose revolver can do. No safeties to fumble, no magazine springs to weaken, no slide to short-stroke—just point, pull, and trust the gun to work every time.
| Caliber | .38 Special +P |
| Capacity | 6 rounds |
| Barrel Length | 2 inches |
| Barrel Rifling | 1:14 LH, 6 groove |
| Overall Length | 7 inches |
| Overall Height | 5 inches |
| Overall Width | 1.4 inches |
| Unloaded Weight | 24.6 ounces |
| Frame Material | Stainless steel |
| Cylinder Material | Stainless steel |
| Barrel Material | Stainless steel |
| Finish | Matte |
| Front Sight | Red fiber optic |
| Rear Sight | Integral notch |
| Trigger Action | Double-action/Single-action |
| Double-Action Trigger Weight | 7–10 pounds |
| Single-Action Trigger Weight | 3–4 pounds |
| Grip | Hogue OverMolded rubber with finger grooves |
Yes. At 24.6 ounces and 7 inches long, the Cobra is designed as a carry-ready snubnose revolver. The compact frame and lightweight build make it easy to conceal, while the stainless steel construction and proven .38 Special +P chambering deliver dependable power without the complexity of a semi-automatic. The Hogue grips and fiber optic front sight add practical ergonomics and sighting speed.
The Cobra is chambered for .38 Special and .38 Special +P. Always verify your specific ammunition is labeled as safe for your firearm and consult the manufacturer's documentation. Do not exceed the pressure rating of your revolver.
Yes, the Cobra features an exposed hammer, allowing both traditional double-action trigger pulls and lighter single-action fire when you manually cock the hammer. The single-action trigger weight is 3–4 pounds, while double-action is 7–10 pounds.
The gun ships with the black Hogue OverMolded rubber grips already installed. Refer to the product documentation or contact Colt directly for details on any additional components or factory documentation included.
SKU: 198467882 • Weight: 3.06oz