Cobalt Kinetics167513494
Cobratec Knives Mblkfsxgen3Tns Fs-X Gen Iii Medium 3" Otf Tanto Plain Stone$159.99
Loading...
Loading...
Loading...
Availability: In Stock
The Cobratec FS-X Gen III Medium is a reliable out-the-front (OTF) knife built for users who need speed and durability in a compact package. With a 3-inch drop point blade in D2 steel and a 4.68-inch aluminum handle, this mid-sized OTF delivers the quick deployment you expect from an OTF knife while staying manageable in hand. The stonewashed finish on the blade gives it a practical, low-maintenance look that hides wear—ideal whether you're working outdoors, training, or keeping one close for everyday carry.
Cobratec has earned a solid reputation among knife users for building OTF knives that balance speed, ergonomics, and longevity. The FS-X Gen III Medium sits in that wheelhouse: not oversized or underpowered, just a straightforward, capable OTF in a size that works for most hand sizes and use cases. D2 steel holds an edge well and is forgiving if you need to touch it up in the field.
If you're already familiar with OTF knives or stepping up from a smaller blade, the FS-X Gen III Medium is worth a serious look. It's the kind of tool that earns its place in a pack or on a belt without drawing attention.
| Blade Length | 3 inches |
| Blade Shape | Drop Point |
| Blade Material | D2 Steel (Stonewashed) |
| Handle Material | Aluminum |
| Handle Length | 4.68 inches |
| Deployment Type | Out-the-Front (OTF) |
| Size Category | Medium |
An out-the-front (OTF) knife deploys the blade along the length of the handle rather than pivoting open. That means it opens and closes with one hand and one motion—no two-handed operation needed. It's faster to deploy but requires different carry and handling practices than a folding knife.
D2 is a tool steel that holds an edge well and resists corrosion better than basic stainless steels, but it's not stainless. It can develop light surface rust if exposed to moisture for extended periods without care. Regular wiping and occasional light oiling will keep it in good shape. The stonewashed finish actually helps hide minor blemishes and patina.
Cobratec is a brand recognized in the OTF and tactical knife space. The FS-X Gen III has earned a following among users who value straightforward design and consistent performance.
At 3 inches of blade and 4.68 inches of handle, the FS-X Gen III Medium is a practical middle ground—compact enough for EDC but with enough blade and grip for serious work. Check your local knife laws before carrying any blade, as OTF knife regulations vary by jurisdiction.
SKU: 167513486 • Width: 5.3in • Height: 2in • Depth: 6.7in • Weight: 0.485oz
Availability: In Stock
The Cobratec FS-X Gen III Medium is a reliable out-the-front (OTF) knife built for users who need speed and durability in a compact package. With a 3-inch drop point blade in D2 steel and a 4.68-inch aluminum handle, this mid-sized OTF delivers the quick deployment you expect from an OTF knife while staying manageable in hand. The stonewashed finish on the blade gives it a practical, low-maintenance look that hides wear—ideal whether you're working outdoors, training, or keeping one close for everyday carry.
Cobratec has earned a solid reputation among knife users for building OTF knives that balance speed, ergonomics, and longevity. The FS-X Gen III Medium sits in that wheelhouse: not oversized or underpowered, just a straightforward, capable OTF in a size that works for most hand sizes and use cases. D2 steel holds an edge well and is forgiving if you need to touch it up in the field.
If you're already familiar with OTF knives or stepping up from a smaller blade, the FS-X Gen III Medium is worth a serious look. It's the kind of tool that earns its place in a pack or on a belt without drawing attention.
| Blade Length | 3 inches |
| Blade Shape | Drop Point |
| Blade Material | D2 Steel (Stonewashed) |
| Handle Material | Aluminum |
| Handle Length | 4.68 inches |
| Deployment Type | Out-the-Front (OTF) |
| Size Category | Medium |
An out-the-front (OTF) knife deploys the blade along the length of the handle rather than pivoting open. That means it opens and closes with one hand and one motion—no two-handed operation needed. It's faster to deploy but requires different carry and handling practices than a folding knife.
D2 is a tool steel that holds an edge well and resists corrosion better than basic stainless steels, but it's not stainless. It can develop light surface rust if exposed to moisture for extended periods without care. Regular wiping and occasional light oiling will keep it in good shape. The stonewashed finish actually helps hide minor blemishes and patina.
Cobratec is a brand recognized in the OTF and tactical knife space. The FS-X Gen III has earned a following among users who value straightforward design and consistent performance.
At 3 inches of blade and 4.68 inches of handle, the FS-X Gen III Medium is a practical middle ground—compact enough for EDC but with enough blade and grip for serious work. Check your local knife laws before carrying any blade, as OTF knife regulations vary by jurisdiction.
SKU: 167513486 • Width: 5.3in • Height: 2in • Depth: 6.7in • Weight: 0.485oz