$518.23
Availability: In Stock
The CMMG Zeroed 36 is a 1.58-inch diameter direct-thread suppressor engineered for 9mm pistols and smaller centerfire rifles, making it a genuine do-all can for shooters who demand versatility without compromise. Built entirely in-house by CMMG with a laser-welded 17-4 stainless steel baffle stack and nitride finish, this full-auto rated suppressor handles everything from standard 9mm to rifle cartridges as large as 8.6 Blackout and 350 Legend—all without special tooling or hassle. Whether you're running a compact carry pistol or a short-barreled rifle, the Zeroed 36 delivers the durability and simplicity that working shooters expect.
What sets the Zeroed 36 apart is its practical engineering. It ships with both a 1/2"-28 and 5/8"-24 direct-thread mount, covering the most common pistol and rifle threading standards. If you already own a preferred quick-detach mounting system, the suppressor is HUB compatible—just swap mounts as your setup changes. The tubeless design and nitride coating resist corrosion and clean easily in an ultrasonic tank or with standard solvents, meaning less downtime between range sessions.
At 17.1 ounces with the mount attached (15.1 oz bare), the Zeroed 36 balances substance with portability. The included direct-thread mounts feature 7/8-inch wrench flats, and the suppressor's 3/8 square drive end cap accepts standard tools—no proprietary gear required. Full-auto rated and rated for approximately 240 rounds between cooldown periods, it's built for sustained use without babying.
Before ordering, confirm your firearm's thread pitch and barrel length requirements. The Zeroed 36 includes only the two direct-thread mounts listed; if your barrel requires a different mounting interface, that mount must be purchased separately.
| Caliber Compatibility | .22 ARC, .300 BLK, .308 WIN, .338 ARC, .350 Legend, 4.6x30mm, 5.56x45mm, 5.7x28mm, 6.5 Creedmoor, 6.5 Grendel, 6mm ARC, 7.62x39mm, 8.6 BLK, 9mm |
| Bore Diameter | .36 caliber / 9mm |
| Outer Diameter | 1.58" |
| Length | 6.5" (with mount); 6.2" (without mount) |
| Weight | 17.1 oz (with mount); 15.1 oz (without mount) |
| Material | Heat-treated 17-4 stainless steel |
| Finish | Nitride |
| Attachment | Direct thread |
| Included Mounts | (1) 1/2"-28 direct-thread HUB mount and (1) 5/8"-24 direct-thread HUB mount |
| HUB Compatible | Yes (1.375"-24 HUB pattern) |
| Full-Auto Rated | Yes (approximately 240 rounds between cooldown periods) |
| Minimum Barrel Lengths | 8.6 BLK: 6.5"; 350 Legend: 10.5"; 300 PRC: 20" |
The Zeroed 36 ships with mounts for both 1/2"-28 and 5/8"-24 threaded barrels. It's rated for 9mm pistols and centerfire rifles from .22 ARC up to .338 ARC, 350 Legend, and 8.6 Blackout, making it one of the few cans truly viable across both pistol and rifle applications. Always verify your specific firearm's thread pitch before ordering.
Yes. The Zeroed 36 is HUB compatible (1.375"-24 HUB pattern), so if you own or want to use a different quick-detach system, you can swap out the included direct-thread mounts for any HUB-pattern mount. This flexibility lets you unify your suppressor setup across multiple firearms as your collection grows.
Each Zeroed 36 comes with the suppressor, one 1/2"-28 direct-thread mount, and one 5/8"-24 direct-thread mount. Both mounts have 7/8-inch wrench flats, and the suppressor features a 3/8 square drive end cap, so you can remove and install mounts using common hand tools—no proprietary gear needed.
Yes. The tubeless design with laser-welded baffles and nitride finish resists corrosion and simplifies maintenance. You can clean it with nearly any standard solvent or in an ultrasonic cleaner without worry, making field care and deep cleaning straightforward and low-hassle.
SKU: 198467999 • Weight: 1oz
Availability: In Stock
The CMMG Zeroed 36 is a 1.58-inch diameter direct-thread suppressor engineered for 9mm pistols and smaller centerfire rifles, making it a genuine do-all can for shooters who demand versatility without compromise. Built entirely in-house by CMMG with a laser-welded 17-4 stainless steel baffle stack and nitride finish, this full-auto rated suppressor handles everything from standard 9mm to rifle cartridges as large as 8.6 Blackout and 350 Legend—all without special tooling or hassle. Whether you're running a compact carry pistol or a short-barreled rifle, the Zeroed 36 delivers the durability and simplicity that working shooters expect.
What sets the Zeroed 36 apart is its practical engineering. It ships with both a 1/2"-28 and 5/8"-24 direct-thread mount, covering the most common pistol and rifle threading standards. If you already own a preferred quick-detach mounting system, the suppressor is HUB compatible—just swap mounts as your setup changes. The tubeless design and nitride coating resist corrosion and clean easily in an ultrasonic tank or with standard solvents, meaning less downtime between range sessions.
At 17.1 ounces with the mount attached (15.1 oz bare), the Zeroed 36 balances substance with portability. The included direct-thread mounts feature 7/8-inch wrench flats, and the suppressor's 3/8 square drive end cap accepts standard tools—no proprietary gear required. Full-auto rated and rated for approximately 240 rounds between cooldown periods, it's built for sustained use without babying.
Before ordering, confirm your firearm's thread pitch and barrel length requirements. The Zeroed 36 includes only the two direct-thread mounts listed; if your barrel requires a different mounting interface, that mount must be purchased separately.
| Caliber Compatibility | .22 ARC, .300 BLK, .308 WIN, .338 ARC, .350 Legend, 4.6x30mm, 5.56x45mm, 5.7x28mm, 6.5 Creedmoor, 6.5 Grendel, 6mm ARC, 7.62x39mm, 8.6 BLK, 9mm |
| Bore Diameter | .36 caliber / 9mm |
| Outer Diameter | 1.58" |
| Length | 6.5" (with mount); 6.2" (without mount) |
| Weight | 17.1 oz (with mount); 15.1 oz (without mount) |
| Material | Heat-treated 17-4 stainless steel |
| Finish | Nitride |
| Attachment | Direct thread |
| Included Mounts | (1) 1/2"-28 direct-thread HUB mount and (1) 5/8"-24 direct-thread HUB mount |
| HUB Compatible | Yes (1.375"-24 HUB pattern) |
| Full-Auto Rated | Yes (approximately 240 rounds between cooldown periods) |
| Minimum Barrel Lengths | 8.6 BLK: 6.5"; 350 Legend: 10.5"; 300 PRC: 20" |
The Zeroed 36 ships with mounts for both 1/2"-28 and 5/8"-24 threaded barrels. It's rated for 9mm pistols and centerfire rifles from .22 ARC up to .338 ARC, 350 Legend, and 8.6 Blackout, making it one of the few cans truly viable across both pistol and rifle applications. Always verify your specific firearm's thread pitch before ordering.
Yes. The Zeroed 36 is HUB compatible (1.375"-24 HUB pattern), so if you own or want to use a different quick-detach system, you can swap out the included direct-thread mounts for any HUB-pattern mount. This flexibility lets you unify your suppressor setup across multiple firearms as your collection grows.
Each Zeroed 36 comes with the suppressor, one 1/2"-28 direct-thread mount, and one 5/8"-24 direct-thread mount. Both mounts have 7/8-inch wrench flats, and the suppressor features a 3/8 square drive end cap, so you can remove and install mounts using common hand tools—no proprietary gear needed.
Yes. The tubeless design with laser-welded baffles and nitride finish resists corrosion and simplifies maintenance. You can clean it with nearly any standard solvent or in an ultrasonic cleaner without worry, making field care and deep cleaning straightforward and low-hassle.
SKU: 198467999 • Weight: 1oz